Стиральная машина индезит btw e71253p rf инструкция

Перейти к контенту

Код: 104664

Извините, товара сейчас нет в наличии

Фирма-производитель оставляет за собой право на внесение изменений в конструкцию, дизайн и комплектацию товара: Стиральная машина Indesit BTW E 71253 P. Пожалуйста, сверяйте информацию о товаре с информацией на
официальном сайте компании производителя.

W111 20 065

This washing machine is equipped with

automatic safety functions which detect and

diagnose faults at an early stage and react

appropriately:

M. “Service” indication

N. “Water tap closed” indication

O. “Clean pump” indication

A. Programme selector

B. Temperature, Time

C. “Start delay” button

D. Programme sequence indicator

E. “Spin” button (incl. Rinse hold)

F. “Start/Pause” button

G. “Reset/Drain” button

H. “Temperature” button

I. “Soil level” button

J. Child lock button combination

K. Detergent overdosage indication

L. “Door locked” indication

Programme Care

Labels

Max.

Load

kg

Type of wash / Notes

— for temperature selection, respect the manufacturer’s recommendations on the care label

Detergents and Additives Special options Max.

Spin

Speed

rpm

Pre-

wash

Main

Wash

Softe-

ner

Easy

Ironing

Stira-

Facile

Start

delay

Partenza

Ritardata

Pre-

wash

Pre-

lavaggio

Extra

Rinse

Extra

Risciacquo

Soil

Level

Livello

di Sporco

Rinse Hold /

Spin Speed

Centrifuga

Energy

Saver

Intensive

wash

Lavaggio

Intensivo

Turn & Wash

30°C

Turn & Wash

30°C 3,5 The best daily washing solution. Particularly useful for lightly and normally soiled textiles made

of cotton or synthetic fabrics, as it washes at low temperature and a maximum spin speed. –Yes i–i– – i– – – 10001)

Synthetics

cold — 60°C

Sintetici

freddo — 60°C 3.0 For washing soiled garments made from synthetic bres (such as polyester, polyacrylic,

viscose, etc.) or cotton/synthetic blends. iYes i i i i i i i i i max.

Cotton

cold — 95°C

Cotone

freddo — 95°C max. Normally to heavily soiled and robust cottons . iYes i i i i i i i i i max.

Eco Cotton

40 — 60°C

Cotone Eco

40 — 60°C

max.

For washing normally soiled cotton garments. At 40°C and 60°C, this is the standard cotton

programme and the most ecient in terms of water and energy consumption.

— Reference programme for the Energy Label.

–Yes i–i–i i i i – max.

Mixed

cold — 40°C

Misti

freddo — 40°C max. For washing mixed fabrics garments or for mixed load of cotton and synthetics, preserving

bers. iYes i–i i i i i i – max.

Gym kit

40 — 60°C

Kit Palestra

40 — 60°C 3,5 Normally soiled and sweaty sportswear made of cotton jersey or microbers. Includes a

prewash cycle – you can add detergent also to the prewash chamber. Do not use softener. iYe s – – i i i i i i –10001)

Bed and Bath

cold — 60°C

Lenzuola e

Asciugamani

freddo — 60°C

3.5

White or coloured bed linen made of cotton and synthetic bers, or blends of both. Reduces

microbes and gently cleans, also delicate bed linen. A thorough rinse phase helps to prevent

detergent and pollen residues. Prefer powder detergent for this programme.

iYes i i i i i i i i – max.

Wool

20°C

Lana

20°C 1.0

All wool garments can be washed using programme “Wool“ even those carrying the

“hand-wash only“ label. For best results, use special detergents and do not exceed max kg

declaration of laundry.

–Yes i–i– – i i – – 10001)

Delicates

30°C

Delicati

30°C 1.5 For washing particularly delicate garments. Preferably turn garments inside out before washing. –Yes i–i– – i i i –10001)

Colours

40°C

Colorati

40°C 3,5 From lightly to normally soiled laundry made of cotton, synthetics or their blends; also

delicates. Helps preserving colours. –Yes i i i –i i i i – max.

Cotton

30°C

Cotone

30°C 3.5 For washing lightly soiled garments quickly. This cycle lasts only 30 minutes, saving time and

energy –Yes i–i– – i i i – max.

Synthetics

30°C

Sintetici

30°C 3.0 Enshorted cycle for lightly soiled garments made from synthetic bres (such as polyester,

polyacrylic, viscose, etc.) or cotton/synthetic blends. –Yes i–i–i i i i – max.

Rinse + Spin Risciacquo +

Centrifuga –max. Separate rinse and intensive spin programme. For robust laundry. – – i–i–i–i– – max.

Spin + Drain Risciacquo +

Scarico –max. Separate intensive spin programme. For robust laundry. – – – – i– – – –/i – – max.

1200

1000

400

A

B

M

I

G

F

L

H

D

EC

O

K

N

J

EN PROGRAMME CHART

Yes = dosing required / i = optional

1) For improved garment care, spin speed is restricted in these programmes.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular

dirt). Increases the cycle time by approximately 19 min.

Do not use liquid detergent for the main wash when

activating the Prewash option.

“Extra Rinse” button

• Helps to avoid detergent residues in the laundry by

extending the rinse phase. Particularly suitable for

washing baby laundry, for people suering from allergies

and for areas with soft water.”

“Soil Level” button

• Soil level is an option working on 3 dierent levels (Heavy,

Mid and Low) that are specially designed to set the right

washing action, depending on your cleaning needs:

—Heavy: high levels of dirtiness, removing most stubborn

stains.

—Mid: everyday stains.

—Low: lightly soiled stains.

“Rinse Hold/ Spin Speed” button

• Every programme has a predened spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the nal spinning is cancelled

and the water is drained out only. However, intermediate

spin phases remain during the rinse.

• If you select “Rinse hold”, the laundry remains in the last

rinse water without progressing to the nal spin cycle,

to avoid creasing and prevent colours from changing. To

activate the “Rinse hold”, press the “Spin” button repeatedly

until the “Rinse hold” symbol on the display lights up.

—The wash programme stops to “Rinse hold” when the “Rinse

hold” symbol on the display blinks; the light of “Start/

Pause” button also blinks.

—To terminate the “Rinse hold” by spinning the laundry, press

“Start/Pause” — the laundry will be spun with the default

spin speed. You can also select another spin speed with the

“Spin” button before you start the spin cycle by pressing

“Start/Pause”.

—To terminate the “Rinse hold” by draining the water without

spinning, press the “Spin” button until spin speed “0”

appears on the display; then press “Start/Pause” to start

the draining. Do not leave the laundry to soak for too long

in the “Rinse hold” (especially silk).

“Energy Saver” button

• Saves energy used for water heating while maintaining

good wash result.

• Recomentable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20 °C).

• Mainly selectable on the lowest temperature step of the

programmes.

“Intensive wash” button

• Choose this option if you use an in-wash additive for stain

removal — it will optimize the additive’s eciency to get

better wash performance and stain removal.

• Use with the maximum load. Add an appropriate of

in-wash additive for stain removal (powder) to the main

wash

• May prolong the programme by up to 10 minutes.

Appropriate for use of stain removers and bleaches on

oxygen basis. Chlorine or perborate bleches must not be

used!

START DELAY

To set the selected programme to start at a later time, press

the “Start delay” button to set the desired delay time. The

lamp for the “Start delay” option button lights up, and it

goes o when the programme starts. Once having pressed

the “Start/Pause” button, the countdown of the time delay

begins. The time delay indication on the display disappears

when the programme starts and it is replaced by the

remaining programme time. Number of hours preselected

can be reduced by pressing the “Start delay” button again.

Do not use liquid detergent when activating this option. To

cancel the “Start delay” turn the programme selector to

another position.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The

blinking light next to the “Start/Pause” button becomes

constant. The programme sequence indicator shows the

current programme phase, running from left to right through

Wash, Rinse, Spin/Drain. When the programme phase is

nised, the corresponding indication goes out.

1.

PREPARATION OF THE WASH CYCLE

Load the washing machine, close the drum door and

check that it is closed properly.

2. Pour in the detergent and any additives, as described

overleaf and in the instruction manual.

3. Close the lid.

4. Turn the programme selector to the desired programme.

The display shows the duration of the selected

programme (in hours and minutes), and the indicator

for the “Start/Pause” button ashes. The temperature

and spin speed can be changed by pressing the

“Temperature” and “Rinse Hold/Spin Speed” buttons.

After the end of a programme, or when a programme is

selected but not yet started, the washing machine will

therefore switch o automatically after about a quarter of

an hour. To switch the washing machine on again, turn the

programme selector to “O” and afterwards to the desired

programme again

SELECT ANY DESIRED OPTION

When the combination of programme and additional

option(s) is not possible, the indication lights switch o

automatically. Unsuitable combinations of options are

deselected automatically.

“Easy Ironing” button

• By selecting this option, the wash and the spin cycles will

be modied in order to reduce the formation of creases.

“DOOR LOCKED” INDICATION

After start of a program the lamp lights up to indicate that

the lid can not be opened. As long as a wash programme

is running, the lid remains locked and must on no account

be forced open. In case you have an urgent need to open

it during a running programme, refer to “Cancel a running

programme before the end”.

CHILD LOCK BUTTONS

You can lock the buttons of the control panel against

improper use (e.g. by children).

• Press both of the child lock buttons simultaneously and

hold them for at least 3 seconds. The key symbol on the

display lights up.

• To unlock the buttons again: proceed in the same way.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed” — No or not sucient inlet water.

“Service” — Failure or malfunction of an electrical component.

“Clean pump” — Waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning

•

PROGRAMME END

The “Door locked” indication lights o and the display

shows “End”. After about a quarter of an hour, the washing

machine will switch o completely to save energy.

1. Turn the programme selector to the “O” position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the interior of the

machine to dry.

DETERGENT OVERDOSAGE INDICATION

The symbol will light up at the end of the programme if you

used too much detergent. Use less detergent next time. If the

symbol lights up and the display shows “Fod”, too much foam

interrupted the wash process; refer to the “Troubleshooting

Guide” in your Instructions for use.

1.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

Press the “Start/Pause” button to pause the programme.

The light blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme

continues at the same position where the previous

programme was interrupted. Do not add detergent for this

programme.

CANCEL A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button cancels a programme before the end.

• Press the “Reset/Drain” button for at least 3 seconds. The

water is drained out; it may last a while until you can open

the lid.

Programme Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration (hrs : min) %

Turn & Wash 30 3.5 43 0.40 0:45

Synthetics 60 3.0 54* 0.89 2:05 40

Synthetics 40 3.0 50 0.56 1:50

Cotton 95 7.0 58* 2.10 2:35

64Cotton 60 7.0 52 1.33 2:35

Cotton 40 7.0 64 0.99 3:00

Eco Cotton ** 60 7.0 48 0.90 4:00

62

Eco Cotton ** 60 3.5 34 0.75 2:50

Eco Cotton ** 40 7.0 48 0.75 2:45

Eco Cotton ** 40 3.5 34 0.65 2:30

Mixed 40 7.0 55 0.80 2:00

Gym kit 40 3.5 57 0.75 1:30

Bed and Bath 60 3.5 55 1.10 2:00

Wool 20 1.0 40 0.10 0:35

Delicate 30 1.5 50 0.50 0:45

Colours 40 3.5 40 0.47 0:59

Cotton 30 3.5 42 0.25 0:30

Synthetics 30 3.0 40 0.31 0:50

CONSUMPTION DATA Power consumption in o-mode 0.11 W / in left-on mode 0.11 W

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with

respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer

to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may dier from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

Approximate remaining moisture content (%). After programme end and spinning with maximum selectable spin speed, in default programme setting.

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference Programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.