Хендай туссан 2008 инструкция по эксплуатации - Инструкции, руководства, мануалы

Автосервис АвтоМиг в Коптево

Автосервис САО — МЦД Красный Балтиец:

Ближайшие для подъезда улицы – Космонавта Волкова, Приорова, Новая Ипатовка, Большая Академическая.

Автосервис АвтоМиг в Лефортово

Автосервис ЮВАО, ВАО — метро Авиамоторная:

Ближайшие станции метро — Авиамоторная, Площадь Ильича, Шоссе Энтузиастов, Чкаловская, Бауманская, Семеновская. Ближайшие для подъезда улицы — третье транспортное кольцо (ТТК), проезд завода Серп и Молот, Лефортовский вал, Красноказарменная улица.

Автосервис АвтоМиг в Щукино

Автосервис СЗАО, САО — метро Октябрьское поле, станция Зорге МЦК (район Щукино, Хорошёво—Мнёвники)

Ближайшие станции метро — Октябрьское поле, Полежаевская. Станция Московского Центрального Кольца — Зорге. Ближайшие для подъезда улицы — Маршала Бирюзова, Берзарина, Народного ополчения, Зорге, Куусинена, Расплетина.

Автосервис АвтоМиг в Измайлово

Автосервис ВАО — метро Соколиная гора (район Измайлово)
Ближайшие станции метро — Соколиная гора, Партизанская, Измайлово, Шоссе Энтузиастов, Черкизовская. Ближайшие для подъезда улицы — Вернисажная, Шоссе Энтузиастов, проспект Будённого, Северо-Восточная хорда, Щербаковская улица, Большая Черкизовская улица.

Автосервис АвтоМиг в Гольяново

Автосервис ВАО — метро Щелковская (район Гольяново)
Ближайшие станции метро — Щелковская, Черкизовская, Бульвар Рокоссовского, Первомайская, Партизанская, Измайловская. Ближайшие для подъезда улицы — Щелковское шоссе, Амурская, Сиреневый бульвар, Монтажная улица, Байкальская улица, Открытое шоссе.

AUTO-TEXCENTER.RU

Франшиза автосервиса, Вакансии автосервиса, Инструкции к корейским авто, Инструкции к китайским авто

Ремонт (сервис) корейских автомобилей. Специализированный техцентр (автосервис) в Москве. Copyright © 2000-2023. Все права сохранены. Обращаем Ваше внимание на то, что данный сайт носит исключительно информационный характер и ни при каких условиях не является публичной офертой, определяемой положениями Статьи 437 (2) Гражданского кодекса Российской Федерации.

Компания «АвтоМиг» является НЕОФИЦИАЛЬНЫМ техническим центром по обслуживанию и ремонту автомобилей марок KIA и HYUNDAI. Никакого отношения ни к официальным представителям (дилерам), ни к самим производителям транспортных средств автосервис не имеет! Все упоминания торговых знаков (марок автомобилей) на данном сайте носят исключительно ИДЕНТИФИЦИРУЮЩИЙ характер (используются не в качестве средства индивидуализации), указывают, какие именно автомобили обслуживает техцентр (в соответствии со ст. 1474, 1487 Гражданского Кодекса РФ).

Источник

Технические характеристики
Габаритные размеры, мм Рулевое управление с гидроусилителем Топливная система Шины Запасное колесо Электрооборудование Тормозная система Двигатели Применяемые смазочные…

Информация для владельца
Идентификационный номер автомобиля (VIN) Идентификационный номер автомобиля (VIN) используется при регистрации автомобиля и во всех юридических ситуациях, связанных с…

Обкатка вашего нового Hyundai
Первые 2000 км пробега (автомобили с бензиновым двигателем) Каких-либо особых требований к обкатке нового автомобиля не предъявляется. Однако Вы можете повысить…

Ключи — общие сведения
Для большего удобства все замки Вашего Hyundai отпираются и запираются одним ключом. Однако, поскольку двери можно запереть без ключа, рекомендуется иметь при себе…

Инструкция по эксплуатации — общие сведения
Контрольные лампы указателей поворота — мигающие контрольные лампы указателей поворота выполнены в виде стрелок зеленого цвета. Если одна из ламп горит постоянным светом…

Комбинация приборов
Указатель уровня топлива Стрелка указателя показывает примерный уровень топлива в баке. Указатель температуры охлаждающей жидкости Стрелка указателя не должна выходить…

Аварийная сигнализация
Аварийную сигнализацию необходимо включать во всех случаях при остановке автомобиля в каком-либо опасном месте улицы или дороги. В случае такой вынужденной остановки…

Выключатели обогрева стекол
Выключатель обогрева ветрового стекла (дополнительное оборудование) Обогрев ветрового стекла включается нажатием на специальный выключатель, а выключается повторным…

Цифровые часы
Цифровые часы имеют три кнопки для установки времени: Установка часов: для установки часов нажимайте на кнопку «Н». Установка минут: нажимайте на кнопку «М». Сброс…

Электрические стеклоподъемники дверей
Электрические стеклоподъемники работают только при положении «ON» («ЗАЖИГАНИЕ») ключа в замке зажигания. Главными переключателями стеклоподъемников, расположенными на…

Передние сиденья
Регулировка положения сидений в продольном направлении Для передвижения сиденья в продольном направлении потяните вверх за блокировочную рукоятку. При этом…

Заднее сиденье
Регулирование наклона спинки Для регулировки наклона спинки сиденья потяните за рукоятку фиксатора спинки, установите спинку в нужное положение и отпустите рукоятку….

Двигатель не запускается
Двигатель не прокручивается или медленно прокручивается стартером 1. На автомобиле с автоматической коробкой передач убедитесь, что рычаг селектора находится в положении…

Запасное колесо
Докаточное запасное колесо При необходимости установки докаточного запасного колеса необходимо соблюдать следующие требования: 1. После установки запасного колеса…

Буксировка автомобиля
В случае необходимости буксировка Вашего автомобиля должна производиться силам местного дилера Хёндэ или специальной буксировочной службы. Это гарантирует автомобиль от…

Если вы потеряли ключи
В случае потери ключей автомобиля дилер Hyundai изготовит новые ключи, если у Вас есть их номер. Если ключи оказались запертыми в автомобиле и нет возможности получить…

Ссылка в разных форматах на этот раздел

TextHTMLBB Code

Источник

2008

A010A02A-AAT

WARRANTIES FOR YOUR HYUNDAI VEHICLE

Please consult your Owner’s Handbook & Warranty Information booklet for your vehicle’s specific warranty coverage.

A020A01A-AAT

RESPONSIBILITY FOR MAINTENANCE

The maintenance requirements for your new Hyundai are found in Section 5. As the owner, it is your responsibility to see that all maintenance operations specified by the manufacturer are carried out at the appropriate intervals. When the vehicle is used in severe driving conditions, more frequent maintenance is required for some operations. Maintenance requirements for severe operating conditions are also included in Section 5.

OWNER’S MANUAL

A030A01JM-AAT

Operation

Maintenance

Specifications

A030A01JM

All information in this Owner’s Manual is current at the time of publication. However, Hyundai reserves the right to make changes at any time so that our policy of continual product improvement may be carried out.

This manual applies to all Hyundai models and includes descriptions and explanations of optional as well as standard equipment. As a result, you may find material in this manual that does not apply to your specific vehicle.

A070A01A-AAT

!CAUTION: MODIFICATIONS TO YOUR HYUNDAI

Your Hyundai should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your Hyundai and may, in addition, violate conditions of the limited warranties covering the vehicle. Certain modifications may also be in violation of regulations established by the U.S. Department of Transportation and other federal or state agencies.

A080A01S-AAT

TWO-WAY RADIO OR CELLULAR TELEPHONE INSTALLATION

Your vehicle is equipped with electronic fuel injection and other electronic components. It is possible for an improperly installed/adjusted two-way radio or cellular telephone to adversely affect electronic systems. For this reason, we recommend that you carefully follow the radio manufacturer’s instructions or consult your Hyundai dealer for precautionary measures or special instructions if you choose to install one of these devices.

A090A01A-AAT

SAFETY AND VEHICLE DAMAGE WARNING

This manual includes information titled as WARNING, CAUTION and NOTE.

These titles indicate the following:

!WARNING:

This indicates that a condition may result in harm, serious injury or death to you or other persons if the warning is not heeded. Follow the advice provided with the warning.

!CAUTION:

This indicates that a condition may result in damage to your vehicle or its equipment if the caution is not heeded. Follow the advice provided with the caution.

NOTE:

This indicates that interesting or helpful information is being provided.

A110A01A-AAT

VEHICLE DATA COLLECTION AND EVENT DATA RECORDERS

Your Hyundai vehicle is equipped with many high technology, electronically controlled systems that help to ensure your vehicle operates properly and provides the performance that you expect. These systems utilize computers to monitor the operation of various systems and components and help to control their operation. These computerized system operations are wide-ranging and involve components to reduce emissions, to continuously evaluate the readiness of the airbag and seat belt pretensioner systems, to determine when the airbag and seat belt pre-tensioner systems should be deployed and then to activate the deployment, and if equipped, to operate anti-lock braking, traction control and electrical stability control to assist the driver to control the vehicle in difficult driving situations. These systems electronically store information that is useful to service technicians when they need to diagnose and repair these systems. Additional information is stored only when a crash occurs that results in the deployment of the airbags or seat belt pre-tensioners. This type of data storage is done by devices called event data recorders(EDR).

After a crash event, the airbag and seat belt pre-tensioner computer system, known as the Supplemental Restraint System Control Module (SRSCM) or Airbag Control Unit (ACU), may record some information about the condition of the vehicle and how it was being operated. This information consists of data related to seat belt usage and if there was diagnostic information in the airbag or seat belt systems at the time that a crash occurred, and if the ACU sensed that a crash of sufficient severity occurred to require seat belt pre-tensioner or airbag deployment.

To retrieve this information, special equipment is needed and access to the vehicle or the device that stores the data is required. Hyundai will not access information about a crash event or share it with others except:

o in response to an official request of police or similar government office, or

o with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee, or o as part of Hyundai’s defense of litigation, or

o as required by law.

A040A01A-AAT

FOREWORD

Thank you for choosing Hyundai. We are pleased to welcome you to the growing number of discriminating people who drive Hyundais. The advanced engineering and high-quality construction of each Hyundai we build is something of which we’re very proud.

Your Owner’s Manual will introduce you to the features and operation of your new Hyundai. It is suggested that you read it carefully because the information it contains can contribute greatly to the satisfaction you receive from your new car.

The manufacturer also recommends that all service and maintenance on your car be performed by an authorized Hyundai dealer. Hyundai dealers are prepared to provide high-quality service, maintenance and any other assistance that may be required.

A050A04A-AAT

HYUNDAI MOTOR COMPANY

Note : Because future owners will also need the information included in this manual, if you sell this Hyundai, please leave the manual in the vehicle for their use. Thank you.

!CAUTION:

Severe engine and transaxle damage may result from the use of poor quality fuels and lubricants that do not meet Hyundai specifications. You must always use high quality fuels and lubricants that meet the specifications listed on Page 9-4 in the Vehicle Specifications section of the Owner’s Manual and which also appear in the Service Station Information on the back cover of the Owner’s Manual.

Copyright 2008 Hyundai Motor Company. All rights reserved. No part of this publication may be reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written permission of Hyundai Motor Company.

A100A03A-AAT

Guide to Hyundai Genuine Parts

1.What are Hyundai Genuine Parts?

Hyundai Genuine Parts are the same parts used by Hyundai Motor Company to manufacture vehicles. They are designed and tested for the optimum safety, performance, and reliability to our customers.

2.Why should you use genuine parts?

Hyundai Genuine Parts are engineered and built to meet rigid manufacturing requirements. Using imitation, counterfeit or used salvage parts is not covered under the Hyundai New Vehicle Limited Warranty or any other Hyundai warranty. In addition, any damage to or failure of Genuine Hyundai Parts caused by the installation or failure of

A100A01L

an imitation, counterfeit or used salvage part is not covered by any Hyundai Warranty.

3.How can you tell if you are purchasing Hyundai Genuine Parts?

Look for the Hyundai Genuine Parts Logo on the package (see below).

HyundaiGenuinePartsexportedtotheUnited States are packaged with labels written only in English.

Hyundai Genuine Parts are only sold through authorized Hyundai Dealerships.

A100A02L

To find the closest authorized dealer call

1-800-826-CARS

A100A03L

A100A04L

TABLE OF CONTENTS

SECTION

FEATURES OF YOUR HYUNDAI	1
DRIVING YOURHYUNDAI	2
WHAT TO DO IN AN EMERGENCY	3
CORROSION PREVENTION & APPEARANCE CARE	4
VEHICLE MAINTENANCE REQUIREMENTS	5
DO-IT-YOURSELFMAINTENANCE	6
EMISSION CONTROL SYSTEMS	7
CONSUMER INFORMATION, REPORTING SAFETY DEFECTS &	8
BINDING ARBITRATION OF WARRANTY CLAIMS

VEHICLE SPECIFICATIONS	9

INDEX	10

	F7

INSTRUMENTSANDCONTROLS

B250A01JM-AAT

B250A01JM-U

1.Panel Brightness Control Knob (Rheostat Switch)

2.4WD Lock Switch (If installed)

3.Traction Control System (TCS) Switch (If installed) / Electronic Stability Control (ESC) Switch (If installed)

4.Instrument Cluster

5.Multi-Function Light Switch (If installed)

6.Front Window Defroster (If installed) / Aux Outlet (If installed)

7.Hazard Warning Light Switch

8.Digital Clock

9.Windshield Wiper/Washer Switch

10.Rear Defroster and Outside Rearview Mirror Heater Switch (If installed)

11.Front Fog Light Switch (If installed)

12.Passenger’s Airbag

13.Hood Release Lever

14.Horn and Driver’s Airbag

15.Small Article Tray / Ashtray (If installed)

16.Cruise Control Switch (If installed)

17.Heating/Air Conditioning Control Panel (If installed)

18.Shift Lever (If installed)

19.Glove Box

!CAUTION:

When installing a container of liquid air freshener inside the vehicle, do not place it near the instrument cluster nor on the instrument panel surface. If there is any leakage from the air freshener onto these areas (Instrument cluster, instrument panel or air ventilator), it may damage these parts. If the liquid from the air freshener does leak onto these areas, wash them with water immediately.

YOUR VEHICLE AT A GLANCE

B255A03JM-AAT

INDICATOR SYMBOLS ON THE INSTRUMENT PANEL

SRS (Airbag) Service Reminder Indicator (SRI)

Turn Signal Indicator Lights

Seat Belt Reminder Light and Chime

High Beam Indicator Light

Low Oil Pressure Warning Light

Parking Brake/Brake Fluid Level Warning Light

Charging System Warning Light

Tail Gate Open Warning Light

Door Ajar Warning Light and Chime (If installed)

Low Fuel Level Warning Light

Malfunction Indicator Light

ABS Service Reminder Indicator (If installed)

Traction Control Indicator Light (If installed)

Electronic Stability Control (ESC) Indicator

Lights (If Installed)

Cruise Indicator (If installed)

SET Indicator Light (If installed)

4WD System Warning Light (If installed)

4WD Lock Indicator Light (If installed)

Low tire pressure telltale (If installed)

TPMS (Tire pressure monitoring system) malfunction indicator (If installed)

F10 * More detailed explanations of these items will be found beginning on page 1-48.

FEATURES OF YOUR HYUNDAI

Fuel Recommendations …………………………………………	1-2
Breaking in Your New Hyundai ……………………………….	1-3
Keys ……………………………………………………………………	1-3
Door ……………………………………………………………………	1-4
Power Windows ………………………………………………….	1-11
Seats …………………………………………………………………	1-12
Seat Belts…………………………………………………………..	1-18
Child Restraint System ………………………………………..	1-25
Supplemental Restraint (AIRBAG) system ……………..	1-33
Instrument Cluster and Indicator Lights ………………….	1-46
Warning and Indicator Lights ………………………………..	1-48
Multi-Function Light Switch …………………………………..	1-58
Windshield Wiper/Washer Switch ………………………….	1-60
Sunroof ……………………………………………………………..	1-68
Mirror …………………………………………………………………	1-73
How to use Luggage Room ………………………………….	1-79
Hood Release …………………………………………………….	1-84
Cruise Control …………………………………………………….	1-87
Heating and Cooling Control ……………………………….	1-102
Stereo Sound System ………………………………………..	1-109
Audio System ……………………………………………………	1-111
Antenna ……………………………………………………………	1-132

B010A05A-AAT

Use Unleaded Gasoline

UNLEADED

FUEL ONLY

B010A01JM

Unleaded gasoline with a Pump Octane Rating of 87 (Research Octane Number 91) or higher must be used in your Hyundai.

!WARNING:

oDo not «top off» after the nozzle automatically shuts off when refueling.

oTighten the cap until it clicks, otherwise the » » light will illuminate.

oAlways check that the fuel cap is installed securely to prevent fuel spillage in the event of an accident.

B010B01A-AAT

What About Gasohol?

Gasohol (a mixture of 90% unleaded gasoline and 10% ethanol or grain alcohol) may be used in your Hyundai. However, if your engine develops driveability problems, the use of 100% unleaded gasoline is recommended. Fuels with unspecified quantities of alcohol, or alcohols other than ethanol, should not be used.

B010C01A-AAT

Use of MTBE

Hyundai recommends that fuels containing MTBE (Methyl Tertiary Butyl Ether) over 15.0% vol. (Oxygen Content 2.7% weight) should not be used in your Hyundai.

Fuel containing MTBE over 15.0% vol. (Oxygen Content 2.7% weight) may reduce vehicle performance and produce vapor lock or hard starting.

B010D01A-AAT

Do Not Use Methanol

Fuels containing methanol (wood alcohol) should not be used in your Hyundai. This type of fuel can reduce vehicle performance and damage components of the fuel system.

!CAUTION:

Your Hyundai’s New Vehicle Limited Warranty may not cover damage to the fuel system and any performance problems that are caused by the use of fuels containing methanol or fuels containing MTBE (Methyl Tertiary Butyl Ether) over 15.0% vol. (Oxygen Content 2.7% weight.)

			FEATURESOFYOURHYUNDAI 1
	BREAKINGINYOURNEWHYUNDAI	KEYS	3

B010E01A-AAT	B020A01S-AAT	B030A01A-AAT

Gasolines for Cleaner Air

To help contribute to cleaner air, Hyundai recommends that you use gasolines treated with detergent additives, which help prevent deposit formation in the engine. These gasolines will help the engine run cleaner and enhance performance of the Emission Control System.

B010F01A-AAT

Operation in Foreign Countries

If you are going to drive your Hyundai in another country, be sure to:

oObserve all regulations regarding registration and insurance.

o Determine that acceptable fuel is available.

During the First 1,200 Miles (2,000 Km)

No formal «break-in» procedure is required with your new Hyundai. However, you can contribute to the economical operation and durability of your Hyundai by observing the following recommendations during the first 1,200 miles (2,000 km).

o Don’t drive faster than 55 MPH (88 km/h).

oWhile driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.

oUse moderate acceleration. Don’t start quickly or depress the accelerator pedal fully.

oFor the first 200 miles (300 km), try to avoid hard stops.

oDon’t lug the engine (in other words, don’t drive so slowly in too high a gear that the engine «bucks»-shift to a lower gear).

oWhether going fast or slow, vary your speed from time to time.

oDon’t let the engine idle longer than 3 minutes at one time.

oDon’t tow a trailer during the first 1,200 miles (2,000 km) of operation.

B030A01HR

For greater convenience, the same key operates all the locks in your Hyundai. However, because the doors can be locked without a key, carrying a spare key is recommended in case you accidentally lock one key inside the car.

1FEATURESOFYOURHYUNDAI

4		DOOR LOCKS
B030B01A-AAT	B030C01JM-AAT	B040A01A-AAT

Record Your Key Number

B030B01HR

A code number is stamped on the number plate that came with the keys to your Hyundai. This key number plate should not be left with the keys but kept in a safe place, not in the vehicle. The key number should also be recorded in a place where it can be found in an emergency.

If you need additional keys, or if you should lose your keys, your authorized Hyundai dealer can make new keys if you can supply the key number.

ILLUMINATED IGNITION SWITCH (If installed)

B030C01E-1

Whenever either front door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the «ON» position.

The light will go off approximately 10 seconds after closing the door or when the ignition switch is turned on.

!WARNING:

oUnlocked doors can be dangerous. Before you drive away (especially if there are children in the car), be sure that all the doors are securely closed and locked so that the doors cannot be opened from the inside. This helps ensure that the doors will not be opened accidentally. Also, when combined with the proper use of seat belts, locking the doors helps keep occupants from being ejected from

the car in case of an accident.

oBefore opening the door, always look for and avoid oncoming traffic.

FEATURESOFYOURHYUNDAI 1

B040B01JM-AAT	B040C02O-AAT
Locking, unlocking front doors with a	Locking From the Outside
key	(Driver’s side — without key)

UNLOCK

LOCK

NOTE:

oWhen pushing the lock switch of the driver’s door to the «LOCK» position, only the driver’s door can be locked.

oIf your vehicle is equipped with the central door locking system, the door will not lock if the key is left in the ignition switch when the front doors are closed.

oWhen locking the door this way, be careful not to lock the door with the ignition key left in the vehicle.

oTo reduce the chances of theft, always remove the ignition key, close all windows, and lock all doors and the tail gate when leaving your vehicle unattended.

oThe door can be locked or unlocked with a key.

oLock the door by turning the key toward the front of the vehicle and unlock it by turning the key toward the rear.

NOTE:

The driver’s door can be unlocked by turning the key once toward the rear. If you wish to unlock all doors, turn the key again toward the rear within 4 seconds. The passenger’s side will lock or unlock all doors with just one rotation.

The doors can be locked without a key. To lock the doors, first push the inside lock switch to the «LOCK» position so that the red mark on the switch is not visible, then close the door.

B040D01O-AAT

Locking From the Inside (Driver’s side)

LOCK

UNLOCK

HJM2008

To lock the door from the inside, simply close the door and push the lock switch to the «LOCK» position.

NOTE:

oWhen pushing the lock switch of the driver’s door to the «LOCK» position, only the driver’s door can be locked.

oWhen the door is locked, the red mark on the switch is not visible.

oThe driver’s door can be opened by pulling the inside door handle even if the lock switch is depressed.

B045C01JM-AAT

Locking From the Outside (Passenger’s side — Without key)

B045C01JM

The door can be locked without a key. To lock the door, first push the inside lock switch to the «LOCK» position so that the red mark on the switch is not visible, then close the door.

NOTE:

oWhen pushing the lock switch of the passenger’s door to the «LOCK» position, only the passengers door will be locked.

oIf your vehicle is equipped with the central door locking system, the door will not lock if the key is left in the ignition switch when the front doors are closed.

oWhen locking the door this way, be careful not to lock the door with the ignition key left in the vehicle.

oTo reduce the chances of theft, always remove the ignition key, close all windows, and lock all doors and the tail gate when leaving your vehicle unattended.

B045D01JM-AAT

Locking From the Inside (Passenger’s side)

UNLOCK

LOCK

HJM2008-D

To lock the door from the inside, simply close the door and push the lock switch to the «LOCK» position. When this is done, neither the outside nor the passenger’s inside door handles can be used.

FEATURESOFYOURHYUNDAI 1

NOTE:

oWhen pushing the lock switch of the passenger’s door to the «LOCK» position, only the passenger’s door locks.

oWhen the door is locked, the red mark on the switch is not visible.

B040E04A-AAT

Child-Protector Rear Door Lock

HJM2011

Your Hyundai is equipped with left and right side «child-protector» rear door locks. When the lock mechanism is engaged, the rear door cannot be opened from the inside. Its use is recommended whenever there are small children in the rear seat.

To engage the child-protector feature so that the door cannot be opened from the inside, move the child-protector lever to the » » position and close the door. Move the lever to the » » position when normal door operation is desired.

To open the door from the outside, pull the outside door handle.

B040G03HP-AAT

Central Door Locks

Driver’s door

HJM2010

Passenger’s door

HJM2120

The central door locking switch is located on the front door arm rest. It is operated by depressing the door lock switch.

NOTE:

oWhen pushing the front portion of the switch, all vehicle doors will lock. If any door is open when the switch is depressed, the door will remain locked when closed.

oWhen pushing the rear portion of the switch, all vehicle doors will unlock.

oThe central door locking is operated by turning the key in the front door lock toward the front or rear of the vehicle.

NOTE:

If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components.

B070F03O-AAT

KEYLESS ENTRY SYSTEM (If installed)

NOTE:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

!CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Locking doors

1.Close all doors.

2.Push the «LOCK» button on the transmitter.

3.At the same time all doors lock, the turn signal lights will blink once to indicate that the system is armed.

Unlocking doors

1.Push the «UNLOCK» button on the transmitter.

2.At the same time the driver’s door unlocks, the turn signal lights will blink twice to indicate that the system is disarmed.

NOTE:

If you wish to unlock all doors, press the «UNLOCK» button on the transmitter again within 4 seconds.

NOTE:

The transmitter will not work if any of following occur:

—The ignition key is in ignition switch.

—You exceed the operating distance limit (393.7 inches [10 m]).

—The battery in the transmitter is weak.

—Other vehicles or objects may be blocking the signal.

—The weather is extremely cold.

—The transmitter is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter.

When the transmitter does not work correctly, open and close the door with the ignition key. If you have a problem with the transmitter, contact an authorized Hyundai Dealer.

NOTE:

Keep the transmitter away from water or any liquid. If the keyless entry system is inoperative due to exposure to water or liquids, it will not be covered by your manufacturer vehicle warranty.

B070A01A-AAT

(If installed)

This system is designed to provide protection from unauthorized entry into the car. This system is operated in three stages : the first is the «Armed» stage, the second is the «Alarm» stage and the third is the «Disarmed» stage. If triggered, the system provides an audible alarm with blinking of the turn signal lights.

B075B01O-AAT

Armed Stage

LOCK

Park the car and stop the engine. Arm the system as described below.

FEATURESOFYOURHYUNDAI 1

1)Remove the ignition key from the ignition switch.

2)Make sure that the hood and tail gate are closed and latched.

3)Lock the doors using the transmitter of the keyless entry system.

After completion of the steps above, the turn signal lights will blink once to indicate that the system is armed.

NOTE:

oIf any door, the tail gate or engine hood remains open, the system will not be armed. If this happens, rearm the system as described above.

oIf the «LOCK» button is pressed once more within 4 seconds after pushing the «LOCK» button on the transmitter, the siren will sound once to indicate that the system is armed.

B075C01JM-AAT

Alarm Stage

The alarm will be activated if any of the following occurs while the car is parked and the system is armed.

1)A front or rear door is opened without using the transmitter or the ignition key.

2)The tail gate is opened without using the transmitter or the ignition key.

3)The hood is opened.

The siren will sound and the turn signal lights will blink continuously for about 30 seconds (This will repeat 3 times). To turn off the system, unlock the door or tail gate using the transmitter or the ignition key.

B075D01JM-AAT

Disarmed Stage

The system will be disarmed by using the transmitter or the ignition key.

The driver’s door is unlocked by depressing once the «UNLOCK» button on the transmitter. If you wish to unlock all doors, press the «UNLOCK» button on the transmitter again within 4 seconds.

Whenever the step above is completed, the turn signal lights will blink twice to indicate that the system is disarmed.

NOTE :

The system will rearm if a door, tailgate, or hood is not opened within 30 seconds.

!CAUTION:

Do not arm the system until all passengers have left the car. If the system is armed while a passenger(s) remains in the car, the alarm may be activated when the remaining passenger(s) leaves the car.

1FEATURESOFYOURHYUNDAI

B075E01JM-AAT

Panic Warning

PANIC

B075E01JM

1.Push the «PANIC» button on the back side of the transmitter.

2.At the same time, the siren will sound and the turn signal lights will blink for 30 seconds.

3.To turn off the system, push the «PANIC» button again on the transmitter.

B070E02HP-AAT

Replacing the battery

When the transmitter’s battery begins to get weak, it may take several pushes on the button to lock or unlock the doors. Replace the battery as soon as possible.

Battery type : CR2032

Replacement instructions:

Screwdriver

Battery

Case

B070E01JM

2.Remove the old battery from the case and note the polarity. Make sure the polarity of the new battery is the same(+side facing down), then insert it in the transmitter.

B070E02JM

1.Carefully separate the case with a blade screwdriver as shown in the illustration.

B060A03Y-AAT

B060A03JM

The power windows operate when the ignition key is in the «ON» position. The main switches are located on the driver’s armrest and control the front and rear windows on both sides of the vehicle. The windows may be opened by depressing the appropriate window switch and closed by pulling up the switch. To open the window on the driver’s side, press the switch halfway down. The window moves as long as the switch is operated. To fully open the driver’s window automatically, press the switch fully down. In automatic operation, the window will fully open even if you let go of the switch. To stop at the desired opening, pull up and release the switch.

HJM2017

In order to prevent operation of the passenger front and rear windows, a window lock switch is provided on the armrest of the driver’s door. To disable the power windows, press the window lock switch. To revert to normal operation, press the window lock switch a second time.

NOTE:

The power windows can be operated for 30 seconds after the ignition key is turned to the «ACC» or «LOCK» positions, or removed from the ignition switch.

If the front doors are opened during this 30 second period, the power windows can no longer be operated without the ignition key turned to the «ON» position.

Close Open

HJM2016

!WARNING:

(1)Be careful that someone’s head, hands and body are not trapped by a closing window.

(2)Never try to operate the main switch on the driver’s door and the individual door window switch in opposing directions at the same time. If this is done, the window will stop and cannot be opened or closed.

(3)Do not leave children alone in the car. Always remove the ignition key for their safety.

1FEATURESOFYOURHYUNDAI

12 SEATS

B080A02A-AAT

ADJUSTABLE FRONT SEATS

!WARNING:

oNever adjust the driver’s seat while the vehicle is moving. Any sudden or unexpected movement of the seat could cause you to lose control of the vehicle resulting in an accident. Only adjust the driver’s seat when the vehicle is stationary.

oDo not sit or lean unnecessarily close to the airbag. Position the seat so that you can sit as far back as possible from the airbag and still comfortably reach all controls.

B080B03A-AAT

Adjusting Seat Forward and Rearward

HJM2031

To move the seat toward the front or rear, pull the lock release lever upward. This will release the seat on its track so you can move it forward or rearward to the desired position. When you find the position you want, release the lever and slide the seat forward or rearward on its track until it locks into the desired position and cannot be moved further.

!WARNING:

After adjusting the seat, always check that it is securely locked into place by attempting to move the seat forward or reverse without using the lock release lever. Sudden or unexpected movement of the driver’s seat could cause you to lose control of the vehicle resulting in an accident.

B080C03A-AAT

Adjusting Seatback Angle

HJM2033

To recline the seatback, lean forward to take your weight off it, then pull up on the recliner control lever at the outside edge of the seat.

FEATURESOFYOURHYUNDAI 1

Now lean back until the desired seatback angle is achieved. To lock the seatback into position, release the recliner control lever.

!WARNING:

Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. The protection of your restraint system (seat belts and airbags) is greatly reduced by reclining your seat. Seat belts must be snug against your hips and chest to work properly. The more the seatback is reclined, the greater the chance that an occupant’s hips will slide under the lap belt or the occupant’s neck will strike the shoulder belt. Drivers and passengers should always sit well back in their seats, properly belted, and with the seatbacks upright.

B080D02JM-AAT

Adjustable Headrests

Lock Knob

HJM2044

Headrests are designed to help reduce the risk of neck injuries.

To raise the headrest, pull it up. To lower the headrest, push it down while pressing the lock knob. To remove the headrest, raise it as far as it can go then press the lock knob while pulling upward. This should only be done when the seat is not occupied.

B080E01JM-GAT

Forward and backward adjustment (if installed)

HJM2045-2

The headrest may be adjusted forward to three different positions by pulling the headrest forward. To adjust the headrest backward, pull it fully forward to the farthest position and release it. Adjust the headrest so that it properly supports the head and neck.

1FEATURESOFYOURHYUNDAI

B083D01NF-AAT

B080F01A-AAT

!WARNING:

B080D01JM

oFor maximum effectiveness in case of an accident the headrest should be adjusted so the middle of the headrest is at the same height as the top of the occupant’s eyes. For this reason, the use of a cushion that holds the body away from the seatback is not recommended.

oDo not operate vehicle with the headrests removed as injury to the occupants may occur in the event of an accident. Headrests may provide protection against neck injuries when properly adjusted.

oDo not adjust the headrest hejght while the vehicle is in motion.

Active Headrests (If Installed)

HNF2041-1

The active headrest is designed to move forward and upward during a rear impact. This helps to prevent the driver’s and front passenger’s head from moving backward and thus helps prevent neck injuries.

Seat Cushion Height Adjustment

(Driver’s Seat Only) (If Installed)

HJM2035

To raise or lower the front part of the seat cushion, turn the front knob forward or rearward. To raise or lower the rear part of the seat cushion, turn the rear knob forward or rearward.

FEATURESOFYOURHYUNDAI 1

B080E01F-AAT

B080H02JM-GAT

Lumbar Support Control (Driver’s seat only) (If Installed)

SOFT

FIRM

HJM2036

The driver’s seat is equipped with adjustable lumbar support.

To increase the amount of lumbar support, pull the lever forward.

To decrease it, push the lever toward the rear.

Seatback table (if installed)	! WARNING:

		o Do not sit on the seatback table.
		o Do not place items on the seatback table
		when the vehicle is in motion.
		o Do not leave items on the seatback table
		when the vehicle is in motion.
		B100A02JM-AAT
Recliner control lever	SEAT WARMER (If installed)

	HJM2041

The seatback table is made by folding the front passenger seat forward.

To operate the seatback table

1.Lower the headrest.

2.With the recliner control lever pulled up, fold the front passenger seatback forward to the flat position.

3.When returning the seatback to the upright position, ensure the seatback is completely locked into place.

HJM2042

The seat warmer is provided to warm the front seats during cold weather. With the ignition key in the «ON» position, push either of the switches to warm the driver’s seat or the passenger’s seat.

1FEATURESOFYOURHYUNDAI

During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the «OFF» position.

NOTE:

oThe seat warmer will not operate if the ambient temperature is higher than 82.4°F ± 6.3°F (28°C ± 3.5°C).

oIf the seat warmer doesn’t work when ambient temperature is lower than 75.2°F (24°C), it should be checked at an authorized dealer.

!WARNING:

It is recommended that the seat heater not be used when elderly people or people who are ill occupy the seat. Also, do not use the seat warmer if the occupant is sleeping.

B085A01JM-GAT

REAR SEAT

Adjusting Seatback Angle

Seatback

folding lever

HJM2046

To recline the seatback, pull the seatback folding lever and release it after the desired seatback angle is achieved.

When you recline the seatback to desired position, always be sure it has locked into position.

!CAUTION:

B085B02JM-AAT

Folding Rear Seatback

For convenience, the seatbacks and seat cushions may be folded down and up.

HJM2047

1.Pull the seatback folding lever then push down the seatback.

2.Be sure it has locked into position to listen an audible «Click».

When reclining the seatback, you should adjust the seatback folding lever while standing.

FEATURESOFYOURHYUNDAI 1

HJM2048

NOTE:

oBefore folding the seatback, place the rear seat belt buckles in the buckle pouch on the seatback. This will prevent the seat belt buckles from becoming covered by the seat cushion when it is returned to the seating position.

!CAUTION:

Be careful not to overload seatback. Overloading may cause damage the seatback.

3.To return the seatback to its normal position, pull the seatback folding lever and reverse the above procedure.

oWhen you return the seatback to its upright position, always be sure it is locked into position by pulling and pushing on the top of the seatback.

!WARNING:

oThe purpose of the fold-down rear seat back is to allow you to carry larger items than could otherwise be accommodated. Never allow passengers to sit on the cargo area while the car is moving. This is not a proper seating position and no seat belts are available for use when the seat back is folded down.

This could result in serious injury or death in case of an accident or a sudden stop. Objects should not extend higher than the top of the front seatbacks.

This could allow cargo to slide forward and cause injury or damage during sudden stops.

oWhen you return the rear seatback to its upright position after being folded down, be careful not to damage the seatbelt webbing or buckle. In addition, do not allow the seatbelt webbing or buckle to get caught or pinched in the rear seat.

!WARNING:

oWhen you return the rear seatback to its upright position, be sure it is locked into position. Attempt to move it.

oNever attempt to fold or return seat while the vehicle is moving.

B140A01B-AAT

REAR SEAT WARNING

B140A01JM

For the safety of all passengers, luggage or other cargo should not be piled higher than the top of the seatback.

B150A02S-AAT

SEAT BELT PRECAUTIONS

!WARNING:

All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a collision or sudden stop. Without a seat belt, occupants could be shifted too close to a deploying airbag, strike the interior structure or be thrown from the vehicle. Properly worn seat belts greatly reduce these hazards. Even with advanced airbags, unbelted occupants can be severely injured by a deploying airbag. Always follow the precautions about seat belts, airbags and occupant safety contained in this manual.

B150B04Y-AAT

Infant or Small Child

!WARNING:

Every person in your vehicle needs to be properly restrained at all times, including infants and children. Never hold a child in your arms or lap when riding in a vehicle. The violent forces created during a crash will tear the child from your arms and throw the child against the interior. Always use a child restraint appropriate for your child’s height and weight, see page 1-25.

NOTE:

Small children are best protected from injury in an accident when properly restrained in the rear seat by a child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards. Before buying any child restraint system, make sure that it has a label certifying that it meets Federal Motor Vehicle Safety Standard 213. The restraint must be appropriate for your child’s height and weight. Check the label on the child restraint for this information. See page 1-25.

B150C02A-AAT

Larger Children

Children who are too large for child restraint systems should always occupy the rear seat and use the available lap/shoulder belts. The lap portion should be fastened snug on the hips and as low as possible. Check belt fit periodically. A child’s squirming could put the belt out of position. Children are afforded the most safety in the event of an accident when they are restrained by a proper restraint system in the rear seat. If a larger child (over age 13) must be seated in the front seat, the child should be securely restrained by the available lap/shoulder belt and the seat should be placed in the rearmost position. Children under the age of 13 should be restrained securely in the rear seat. NEVER place a child under the age of 13 in the front seat. NEVER place a rear facing child seat in the front seat of a vehicle.

B150D01A-AAT

Pregnant Women

The use of a seat belt is recommended for pregnant women to lessen the chance of injury in an accident. When a seat belt is used, the lap belt portion should be placed as low and snugly as possible on the hips, not across the abdomen. For specific recommendations, consult a physician.

FEATURESOFYOURHYUNDAI 1

B150E01A-AAT

B160A02A-AAT

Injured Person

A seat belt should be used when an injured person is being transported. When this is necessary, you should consult a physician for recommendations.

B150F01A-AAT

One Person Per Belt

Two people (including children) should never attempt to use a single seat belt. This could increase the severity of injuries in case of an accident.

B150G02A-AAT

Do Not Lie Down

To reduce the chance of injuries in the event of an accident and to achieve maximum effectiveness of the restraint system, all passengers should be sitting up and the front seats should be in an upright position when the car is moving. A seat belt cannot provide proper protection if the person is lying down in the rear seat or if the front seat is in a reclined position.

!WARNING:

Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. The protection of your restraint system (seat belts and airbags) is greatly reduced by reclining your seat. Seat belts must be snug against your hips and chest to work properly. The more the seatback is reclined, the greater the chance that an occupant’s hips will slide under the lap belt causing serious internal injuries or the occupant’s neck could strike the shoulder belt. Drivers and passengers should always sit well back in their seats, properly belted (see page 1-21), and with the seatbacks upright.

CARE OF SEAT BELTS

Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.

!WARNING:

When you return the rear seatback to its upright position after the rear seatback was folded down, be careful not to damage the seat belt webbing or buckle. Be sure that the webbing or buckle does not get caught or pinched in the rear seat. A seat belt with damaged webbing or buckle will not be as strong and could possibly fail during a collision or sudden stop, resulting in serious injury.

B160B01A-AAT

Periodic Inspection

It is recommended that all seat belts be inspected periodically for wear or damage of any kind. Parts of the system that are damaged should be replaced as soon as possible.

1FEATURESOFYOURHYUNDAI

B160C01A-AAT

Keep Belts Clean and Dry

Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.

B160D01A-AAT

When to Replace Seat Belts

Entire in-use seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concerning seat belt operation should be directed to your Hyundai Dealer.

B170A05Y-AAT

HEIGHT ADJUSTABLE FRONT SEAT SHOULDER BELT

HJM2050

You can adjust the height of the shoulder belt anchor to one of the 4 positions for maximum comfort and safety.

If the height of the adjusting seat belt is too near your neck, you will not be getting the most effective protection. The shoulder portion should be adjusted so that it lies across your chest and midway over your shoulder nearest the door and not your neck.

To adjust the height of the seat belt anchor, lower or raise the height adjuster into an appropriate position. To raise the height adjuster, pull it up. To lower it, push it down while pressing the height adjuster button.

Release the button to lock the anchor into position. Try sliding the height adjuster to make sure that it has locked into the position.

!WARNING:

oVerify the shoulder belt anchor is locked into position at the appropriate height. Never position the shoulder belt across your neck or face. Improperly positioned seat belts can cause serious injuries in an accident.

oFailure to replace seat belts after an accident could leave you with damaged seat belts that will not provide protection in the event of another collision leading to personal injury or death. Replace your seat belts after being in an accident as soon as possible.

FEATURESOFYOURHYUNDAI 1

B180A02A-AAT

SEATBELT-Driver’s3-PointSystemwith

Emergency Locking Retractor

To Fasten Your Belt

B180A01L

To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible «click» when the tab locks into the buckle.

The seat belt automatically adjusts to the proper length only after the lap belt portion is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and let you move around. If there is a sudden stop or impact, however, the belt will lock into position. It will also lock if you try to lean forward too quickly.

NOTE:

oIf you are not able to pull out the safety belt from the retractor, firmly pull the belt out and release it. Then you will be able to pull the belt out smoothly.

oIf the driver’s seat belt is not fastened when the ignition key is in the «ON» position, the seat belt warning light will flash and the warning chime will sound for approximately six seconds.

B190A02Y-AAT

SEAT BELTS-Front Passenger and Rear Seat 3-Point System with Combination Locking Retractor

Combination retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a combination retractor is also installed in the front passenger seat position, Hyundai strongly recommends that children always be seated in the rear seat. NEVER place any infant restraint system in the front seat of the vehicle. This type of seat belt combines the features of both an emergency locking retractor seat belt and an automatic locking retractor seat belt. To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible «click» when the tab locks into the buckle. When not securing a child restraint, the seat belt operates in the same way as the driver’s seat belt (Emergency Locking Retractor Type). It automatically adjusts to the proper length only after the lap belt portion of the seat belt is adjusted manually so that it fits snugly around your hips. When the seat belt is fully extended from the retractor to allow the installation of a child restraint system, the seat belt operation changes to allow the belt to retract, but not to extend (Automatic Locking Retractor Type). See page 1-29.

1FEATURESOFYOURHYUNDAI

NOTE:

Although the combination retractor provides the same level of protection for seated passengers in either emergency or automatic locking modes, it is recommended that seated passengers use the emergency locking feature for improved convenience. The automatic locking function is intended to facilitate child restraint installation. To convert from the automatic locking feature to the emergency locking operation mode, allow the unbuckled seat belt to fully retract.

!WARNING:

oFor maximum restraint system protection, the seat belts must always be used whenever the car is moving.

oSeat belts are most effective when seatbacks are in the upright position.

oChildren age 12 and younger must always be properly restrained in the rear seat. Never allow children to ride in the front passenger seat. If a child over 13 must be seated in the front seat, he/she must be properly belted and the seat should be moved as far back as possible.

!WARNING:

oNever wear the shoulder belt under your arm or behind your back. An improperly positioned shoulder belt can cause serious injuries in a crash. The shoulder belt should be positioned midway over your shoulder across your collarbone.

oAvoid wearing twisted seat belts. A twisted belt can’t do its job as well. In a collision, it could even cut into you. Be sure the belt webbing is straight and not twisted.

oBe careful not to damage the belt webbing or hardware. If the belt webbing or hardware is damaged, replace it.

B200A01A-AAT

Adjusting Your Seat Belt

B200A01L

!WARNING:

You should place the lap belt portion as low as possible and snugly across your hips, not on your waist. If the lap belt is located too high on your waist, it may increase the chance of injury in the event of a collision. Both arms should not be under or over the belt. Rather, one should be over and the other under, as shown in the illustration. Never wear the seat belt under the arm nearest the door.

FEATURESOFYOURHYUNDAI 1

B210A01A-AAT

To Release the Seat Belt

B210A01L

The seat belt is released by pressing the release button in the locking buckle. When it is released, the belt should automatically draw back into the retractor.

If this does not happen, check the belt to be sure it is not twisted, then try again.

B220A02JM-AAT

SEAT BELTS — Center Rear Seat 3-Point System With Combination Locking Retractor

(c)

(a)

(b)

(d)

B220A01JM-A

1.Before fastening the rear seat center belt, confirm the metal tab (a) and buckle (b) are latched together.

2.After confirming that (a) and (b) are latched, pull the seat belt out of the retractor and insert the metal tab (c) into the buckle (d).

There will be an audible «click» when the tab locks in the buckle. The seat belt automatically adjusts to the proper length only after the lap belt is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and let you move

around. If there is a sudden stop or impact, the belt will lock into position. It will also lock if you try to lean forward too quickly.

B220A02Y

!WARNING:

oNever let anyone ride in the rear center seat without fastening all metal tabs and buckles as described in this section. This seat belt is designed to function as a typical 3-point restraint (lap/shoulder belt). Using only the shoulder portion or lap portion of the belt can result in serious or fatal injuries in the event of a collision or sudden stop.

1FEATURESOFYOURHYUNDAI

B220C01Y-AAT

!WARNING:

oNever unlock the metal tab (a) and the buckle (b) with the following exceptions.

(1)In case of folding rear seatbacks down.

(2)If transporting an object on the rear seat may cause damage to the rear seat center belt.

oAlways lock metal tab (a) into buckle (b) immediately after returning the rear seatbacks to an upright position. This portion of the rear center seat belt should only be unbuckled when the rear seatback is folded down.

!WARNING:

oIn case of unlocking metal tab (a) and the buckle (b), place metal (a) in the seat belt clip not to make noise while driving.

To disconnect the metal tab (a) from the buckle

(b) , insert a narrow-ended tool into the groove located on the buckle (b).

To Release the Seat Belt

B220C01JM

When you want to release the seat belt, press the button in the locking buckle.

!WARNING:

The rear seat center belt latching mechanism is different from those for the outboard rear seat shoulder belts. When fastening the outboard rear seat shoulder belts or the rear seat center belt, make sure they are inserted into the correct buckles to obtain maximum protection from the seat belt system and assure proper operation.

B220A02JM

FEATURESOFYOURHYUNDAI 1

CHILD RESTRAINT SYSTEM	25
B230A05O-AAT

Children riding in the car should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statistics provided by the National Highway Traffic Safety Administration (NHTSA), children are safer when properly restrained in the rear seats than in the front seat. Larger children not in a child restraint should use one of the seat belts provided.

All 50 states have child restraint laws. You should be aware of the specific requirements in your state. Child and/or infant safety seats must be properly placed and installed in the rear seat. You must use a commercially available child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards (FMVSS). Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt, or by a LATCH system (if equipped).

Children could be injured or killed in a crash if their restraints are not properly secured. For small children and babies, a child seat or infant seat must be used. Before buying a particular child restraint system, make sure it fits your car seat and seat belts, and fits your child. Follow all the instructions provided by the manufacturer when installing the child restraint system.

!WARNING:

oA child restraint system must be placed in the rear seat. Never install a child or infant seat on the front passenger’s seat. Should an accident occur and cause the passenger side airbag to deploy, it could severely injure or kill an infant or child seated in an infant or child seat. Thus only use a child restraint in the rear seat of your vehicle.

oA safety belt or child restraint system can become very hot if it is left in a closed vehicle on a sunny day, even if the outside temperature does not feel hot. Be sure to check the seat cover and buckles before placing a child there.

o When the child restraint system is not in use, store it in the luggage compartment or fasten it with a safety belt so that it will not be thrown forward in the case of a sudden stop or an accident.

oChildren may be seriously injured or killed by an inflating airbag. All children, even those too large for child restraints, must ride in the rear seat.

!WARNING:

To reduce the chance or serious or fatal injuries:

oChildren of all ages are safer when restrained in the rear seat. A child riding in the front passenger seat can be forcefully struck by an inflating airbag resulting in serious or fatal injuries.

oAlways follow the instructions for installation and use of the child restraint maker.

oAlways make sure the child seat is secured properly in the car and your child is securely restrained in the child seat.

oNever hold a child in your arms or lap when riding in a vehicle. The violent

forces created during a crash will tear the child from your arms and throw the child against the car’s interior.

oNever put a seat belt over yourself and a child. During a crash, the belt could press deep into the child causing serious internal injuries.

oNever leave children unattended in a vehicle – not even for a short time. The car can heat up very quickly, resulting in serious injuries to children inside. Even very young children may inadvertently cause the vehicle to move, entangle themselves in the windows, or lock themselves or others inside the vehicle.

1FEATURESOFYOURHYUNDAI

B230B01E-AAT

B230C07O-AAT

!WARNING:

oNever allow two children, or any two persons, to use the same seat belt.

oChildren often squirm and reposition themselves improperly. Never let a child ride with the shoulder belt under their arm or behind their back. Always properly position and secure children in rear seat.

oNever allow a child to stand-up or kneel on the seat or floorboard of a moving vehicle. During a collision or sudden stop, the child can be violently thrown against the vehicles interior, resulting in serious injury.

o Never use an infant carrier or a child safety seat that «hooks» over a seatback, it may not provide adequate security in an accident.

oSeat belts can become very hot, especially when the car is parked in direct sunlight. Always check seat belt buckles before fastening them over a child.

oAlways store or secure a child seat, even when it is not in use. During a collision or sudden stop, the child seat could be thrown inside the vehicle.

Using a Child Restraint System

For small children and babies, the use of a child seat or infant seat is required. This child seat or infant seat should be of appropriate size for the child and should be installed in accordance with the manufacturer’s instructions. It is further required that the seat be placed in the vehicle’s rear seat since this can make an important contribution to safety. Your vehicle is provided with three child restraint hook holders for installing the child seat or infant seat.

Installing a Child Restraint Seat with the «Tether Anchorage» System

Three child restraint hook holders are located on the rear luggage compartment floor.

B230C04JM

This symbol indicates the location of each user ready tether anchorage.

FEATURESOFYOURHYUNDAI 1

To install the child restraint seat tether

Rear luggage compartment floor

	Tether	Child Restraint
	anchor cover
	Hook Holder

		B230C05JM

1.Open the tether anchor cover on the rear luggage compartment floor.

Child

Restraint

Hook

Holders

Tether Strap

Hook

For vehicles with adjustable headrests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.

3.Connect the tether strap hook to the child restraint hook holder and tighten to secure the seat.

!WARNING:

oInstall the Child Restraint Seat fully rearward against the seatback, with the seatback reclined two positions from the most upright latched position.

oA child can be seriously injured or killed in a collision if the child restraint is not properly anchored. Always follow the child seat manufacturer’s instructions for installation and use.

B230B01JM

Front of Vehicle

2.Route the child restraint seat tether strap over the seatback.

1FEATURESOFYOURHYUNDAI

!WARNING:

oNever mount more than one child restraint to a single tether or to a single lower anchorage point. The increased load caused by multiple seats may cause the tethers or anchorage points to break, causing serious injury or death.

B230D05E-AAT

Securing the Child Restraint Seat with the «ISOFIX» system

B230D01JM

Some child seat manufacturers make safety seats that are labeled as ISOFIX or ISOFIXcompatible child seats.

These seats include two rigid or webbing mounted attachments that connect to two ISOFIX anchors at specific seating positions in your vehicle. This type of child seat eliminates the need to use seat belts to attach the child seat for forward-facing child seats.

ISOFIX anchors have been provided in your vehicle. The ISOFIX anchors are located in the left and right outboard rear seating positions. Their locations are shown in the illustration. There is no ISOFIX anchor provided for the center rear seating position.

!WARNING:

oA child can be seriously injured or killed in a collision if the child restraint is not properly anchored. Always follow the

child seat manufacturer’s instructions for installation and use.

oNever install a child restraint using the ISOFIX anchors at the center position of the rear seat. In a crash, the ISOFIX anchors may break if a car seat is improperly placed in the center position resulting in serious or fatal injuries. Only place a ISOFIX or ISOFIX-compatible child seat in the left or right out-board rear seating positions (as shown) to the appropriate ISOFIX anchors provided.

!WARNING:

oWhen using the vehicle’s “ISOFIX” system to install a child restraint system in the rear seat, all unused vehicle rear seat belt metal latch plates or tabs must be latched securely in their seat belt buckles and the seat belt webbing must be retracted behind the child restraint to prevent the child from reaching and taking hold of unretracted seat belts. Unlatched metal latch plates or tabs may allow the child to reach the unretracted seat belts which may result in strangulation and a serious injury or death to the child in the child restraint.

FEATURESOFYOURHYUNDAI 1

ISOFIX Anchor

Position Indicator

ISOFIX Anchor

B230D02JM

The ISOFIX anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions.

Follow the child seat manufacturer’s instructions to properly install safety seats with ISOFIX or ISOFIX-compatible attachments.

Once you have installed the ISOFIX child restraint seat, assure that the seat is properly attached to the ISOFIX and tether anchors. Also, test the safety seat before you place the child in it. Tilt the seat from side to side. Also try to tug the seat forward. Check to see if the anchors hold the seat in place.

!CAUTION:

Do not allow the rear seat belt webbing to get scratched or pinched by the ISOFIXseat latch and ISOFIX anchor during the installation.

!WARNING:

A child can be seriously injured or killed in a collision if the child restraint is not properly anchored to the car and the child is not properly restrained in the child restraint. Always follow the child seat manufacturer’s instructions for installation and use.

B230D03JM

B230F01JM-AAT

Child Restraint System Installation on Rear Seat Center Position

B235G02JM

To install a child restraint system in the center rear seat, extend the shoulder/lap belt entirely from its retractor until a «click» is felt. This will engage the seat belt retractor automatic locking feature, which allows the seat belt to retract but not extend. Install the child restraint system, buckle the seat belt and allow the seat belt to take up any slack. Make sure that the lap portion of the belt is tight around the child restraint system and the shoulder portion of the belt is positioned so that it can not interfere with the child’s head or neck. Also, double check to be sure that the retractor has engaged the Automatic Locking feature by trying to extend webbing out of the retractor. If the retractor is in the

Automatic Locking mode, the belt will be locked.

1FEATURESOFYOURHYUNDAI

B230G02O-AAT

Child Restraint System Installation on Outboard Rear Seats

B235G03JM-B

To install a child restraint system in the outboard rear seats, extend the shoulder/lap belt entirely from its retractor until a «click» is felt. This will engage the seat belt retractor automatic locking feature, which allows the seat belt to retract but not extend. Install the child restraint system, buckle the seat belt and allow the seat belt to take up any slack. Make sure that the lap portion of the belt is tight around the child restraint system and the shoulder portion of the belt is positioned so that it can not interfere with the child’s head or neck. Also, double check to be sure that the retractor has engaged the Automatic Locking feature by trying to extend webbing out of the retractor. If the retractor is in the

Automatic Locking mode, the belt will be locked.

After installation of the child restraint system, try to move it in all directions to be sure the child restraint system is securely installed. If you need to tighten the belt, pull more webbing toward the retractor. When you unbuckle the seat belt and allow it to retract, the retractor will automatically revert back to its normal seated passenger Emergency Locking usage condition.

NOTE:

oBefore installing the child restraint system in any seating position, read the instructions supplied by the child restraint system manufacturer.

oIf the seat belt does not operate as described, have the system checked immediately by your authorized Hyundai dealer.

!WARNING:

oIf the retractor is not in the Automatic Locking mode, the child restraint can move when your vehicle turns or stops suddenly. A child can be seriously injured or killed if the child restraint is not properly anchored to the car, including setting the retractor to the Automatic Locking mode.

oDo not install any child restraint system in the front passenger seat. Should an accident occur and cause the passenger side airbag to deploy, it could severely injure or kill an infant or child seated in an infant or child seat. Therefore, only use a child restraint system in the rear seat of your vehicle.

FEATURESOFYOURHYUNDAI 1

B180B05JM-AAT

Pre-tensioner Seat Belt

Your Hyundai vehicle is equipped with driver’s and front passenger’s pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant’s body in certain frontal collisions.

The pre-tensioner seat belts may be activated with or without airbag activation, depending on the circumstances of a collision.

Driver’s airbag	1 Passenger’s
	airbag

1LDE3100

The seat belt pre-tensioner system consists mainly of the following components. Their locations are shown in the illustration.

1.SRS airbag warning light

2.Retractor pre-tensioner assembly

3.SRS control module

!WARNING:

To obtain maximum benefit from a pretensioner seat belt:

oThe seatbelt must be work correctly and adjusted to the proper position (see pages 1-20). Please read and follow all of the important information and precautions about your vehicle’s occupant safety features – including seat belts and advanced airbags – that are provided in this manual.

oBe sure you and your passengers always wear seat belts and wear them properly.

HXG229

In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant’s body.

1FEATURESOFYOURHYUNDAI

NOTE:

oBoth the driver’s and front passenger’s pre-tensioner seat belts will be activated in certain frontal collisions. The pretensioner seat belt may be activated with or without airbag activation, depending on the circumstances of a collision. The pre-tensioners will not be activated if the seat belts are not being worn at the time of the collision.

oWhen the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal operating conditions and are not hazardous.

oAlthough it is harmless, the fine dust may cause skin irritation and should not be breathed for prolonged periods. Wash all exposed skin areas thoroughly after an accident in which the pre-tensioner seat belts were activated.

!CAUTION:

oThe sensor that activates the SRS airbag is connected with the pre-tensioner seat belts. The SRS airbag warning light BAGAIR on the instrument panel will illuminate for approximately 6 seconds after the ignition key has been turned to the «ON» position, and then it should turn off.

oIf the pre-tensioner seat belt is not working properly, this warning light will illuminate even if there is no malfunction of the SRS airbag system. If the SRS airbag warning light does not illuminate when the ignition key is turned to «ON» or if it remains illuminated after approximately 6 seconds, or if it illuminates while the vehicle is being driven, please have an authorized Hyundai dealer inspect the pre-tensioner seat belts and SRS airbag system as soon as possible.

!WARNING:

oPre-tensioners are designed to operate only one time. After activation, pretensioner seat belts must be replaced. All seat belts, of any type, should always be replaced after they have been worn during a collision.

oThe pre-tensioner seat belt assembly mechanisms become hot during activation. Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated.

oDo not attempt to inspect or replace the pre-tensioner seat belts yourself. This must be done by an authorized Hyundai dealer.

o Do not strike the pre-tensioner seat belt assemblies.

oDo not attempt to service or repair the pre-tensioner seat belt system in any manner.

oImproper handling of the pre-tensioner seat belt assemblies, and failure to heed the warnings to not strike, modify, inspect, replace, service or repair the pretensioner seat belt assemblies may lead to improper operation or inadvertent activation and serious injury.

oAlways wear seat belts when driving or riding in a motor vehicle.

	FEATURESOFYOURHYUNDAI 1
ADVANCED SUPPLEMENTAL	33
RESTRAINT (AIRBAG) SYSTEM (SRS)

B240A02E-AAT

Driver’s Airbag

B240A01JM

Your Hyundai is equipped with an advanced Supplemental Restraint (Airbag) System. The indications of the system’s presence are the letters «SRS AIRBAG» embossed on the airbag pad cover in the steering wheel and the passenger’s side front panel pad above the glove box.

The Hyundai SRS consists of airbags installed under the pad covers in the center of the steering wheel and the passenger’s side front panel above the glove box. The purpose of the SRS is to provide the vehicle’s driver and/or the front passenger with additional protection than that offered by the seat belt system alone, in case of a frontal impact of sufficient severity.

The SRS uses a collection of sensors to gather information about the driver’s and front passenger’s seat position, the driver’s and front passenger’s seat belt usage and impact severity.

The driver’s and front passenger’s seat position sensors, which are installed on the seat track, determine if the seats are fore or aft of a reference position. Similarly, the seat belt usage sensors determine if the driver and front passenger’s seat belts are fastened. These sensors provide the ability to control the SRS deployment based on how close the driver’s seat is to the steering wheel, how close the passenger’s seat is to the instrument panel, whether or not the seat belts are fastened, and how severe is the impact.

The advanced SRS offers the ability to control the airbag inflation with two levels. A first stage level is provided for moderate-severity impacts. A second stage level is provided for more severe impacts.

According to the impact severity, seating position and seat belt usage, the SRSCM(SRS Control Module) controls the airbag inflation. Failure to properly wear seat belts can increase the risk or severity of injury in an accident.

Additionally, your Hyundai is equipped with an occupant classification system in the front passenger’s seat. The occupant classification system detects the presence of a passenger in the front passenger’s seat and will turn off the front passenger’s airbag under certain conditions. For more detail, see «Occupant Classification System» later in this section.

!CAUTION:

If the seat position sensor is not working

properly, the SRS airbag warning light BAGAIR on

the instrument panel will illuminate even if there is no malfunction of the SRS airbag system, because the SRS airbag warning light is connected with the seat position sensor. If the SRS airbag warning light does not illuminate when the ignition key is turned to the «ON» position, if it remains illuminated after coming on for approximately 6 seconds, or if it illuminates while the vehicle is being driven, have an authorized Hyundai dealer inspect the seat position sensor and the advanced SRS airbag system as soon as possible.

1FEATURESOFYOURHYUNDAI

!WARNING:

oModification to the seat structure can adversely affect the seat position sensor and cause the airbag to deploy at a different level than should be provided.

oDo not place any objects underneath the front seats which could damage the seat position sensor or interfere with the occupant classification system.

oDo not place any objects that may cause magnetic fields near the front seats. These may cause a malfunction of the seat position sensor.

NOTE:

oBe sure to read information about the SRS on the labels provided on the back-

side of the sun visor.

oAdvanced airbags are combined with pre-tensioner seat belts to help provide enhanced occupant protection in frontal crashes. Front airbags are not intended to deploy in light collisions in which protection can be provided by the pre-tensioner seat belt.

oIf you are considering modification of your vehicle due to a disability, please contact the Hyundai Customer Assistance Center at 1-800-633-5151.

!WARNING:

Always use seat belts and child restraints – every trip, every time, everyone! Airbags inflate with considerable force and in the blink of an eye. Seat belts help keep occupants in proper position to obtain maximum benefit from the airbag. Even with advanced airbags, improperly and unbelted occupants can be severely injured when the airbag inflates. Always follow the precautions about seat belts, airbags and occupant safety contained in this manual.

To reduce the chance of serious or fatal injuries and receive the maximum safety benefit from your restraint system:

oNever place a child in any child or booster seat in the front seat (see child restraints 1-25).

oABC – Always Buckle Children in the back seat. It is the safest place for children of any age to ride.

oFront and side impact airbags can injure occupants improperly positioned in the front seats.

oMove your seat as far back as practical from the front airbags, while still maintaining control of the vehicle.

oNever sit or lean unnecessarily close to the front or side airbags.

!WARNING:

oNever lean against the door or center console – always sit in an upright position.

oDo not allow an adult passenger to ride in the front seat when the “Passenger Airbag OFF” indicator is illuminated, because the airbag will not deploy in the event of a moderate or severe frontal crash.

oNever place objects over or near any airbag module (front or side impact airbags), because these objects can injure passengers in a crash.

oNever place covers, blankets or aftermarket seat warmers on the passenger

seat as these may interfere with the occupant classification system.

oDo not tamper or disconnect SRS wiring or other components. Injuries could result from inadvertent deployment or failure of the airbag to deploy in a crash.

oIf the SRS airbag warning light (see pg 1- 48) remains illuminated while the vehicle is being driven, have an authorized Hyundai dealer inspect the airbag system as soon as possible.

oAirbags can only be used once – have an authorized Hyundai dealer replace the airbag immediately after deployment.

FEATURESOFYOURHYUNDAI 1

!WARNING:

oThe SRS is designed to deploy the front airbags only when an impact is sufficiently severe and when the impact angle is less than 30° from the forward longitudinal axis of the vehicle. The front airbags will not deploy in side, rear or rollover impacts. Additionally, the airbags will only deploy once. Seat belts must be worn at all times.

oFront airbags are not intended to deploy in side-impact, rear-impact or rollover crashes. In addition, airbags will not deploy in frontal crashes below the deployment threshold.

Rear impact

Side Impact

Rollover B240A02JM

!WARNING:

oMove your seat as far back as practical from the front airbags, while still maintaining control of the vehicle. You and your passengers should never sit or lean unnecessarily close to the airbags. Improperly positioned drivers and passengers can be severely injured by inflating airbags.

oNo objects should be placed over or near the airbag modules on the steering wheel, instrument panel, and the front passenger’s panel above the glove box, because any such object could cause harm if the vehicle is in a crash severe enough to cause the airbags to deploy.

oIf the airbags deploy, they must be replaced by an authorized Hyundai dealer. Deployed airbags WILL NOT inflate again and will provide no protection in subsequent collisions.

oDo not tamper with or disconnect SRS wiring or other components of the SRS system. Doing so could result in injury, due to accidental deployment of the airbags or by rendering the SRS inoperative.

!WARNING:

oEven though your vehicle is equipped with the occupant classification system, do not install a child restraint system in the front passenger seat position. A child restraint system must never be placed in the front seat. The infant or child could be severely injured or killed by an airbag deployment in case of an accident.

oChildren younger than 13 years must always be properly restrained in the rear seat. Never allow children to ride in the front passenger seat. If a child over 13 must be seated in the front seat, he or she must be properly belted and the seat should be moved as far back as possible.

oFor maximum safety protection in all types of crashes, all occupants including the driver should always wear their seat belts whether or not an airbag is also provided at their seating position to minimize the risk of severe injury or death in the event of a crash. Do not sit or lean unnecessarily close to the airbag while the vehicle is in motion.

1FEATURESOFYOURHYUNDAI

!WARNING:

oSitting improperly or out of position can result in serious or fatal injury in a crash. All occupants should sit upright with the seat back in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor until the vehicle is parked and the ignition key is removed.

oThe SRS airbag system must deploy very rapidly to provide protection in a crash. If an occupant is out of position because of not wearing a seat belt, the airbag may forcefully contact the occupant causing serious or fatal injuries.

B240B02JM-AAT

SRS Components and Functions

8 1 7 9 4

B240B02JM

The SRS consists of the following components:

1.Driver’s Airbag Module

2.Passenger’s Airbag Module

3.Knee Bolster

4.Pre-tensioner Seat Belt

5.Front Impact Sensor

6.Driver’s and Front Passenger’s Seat Belt Usage Sensors/Buckle pre-tensioner

7.Driver’s and Front Passenger’s Seat Position Sensors

8.SRS Service Reminder Indicator (SRI)

9.SRS Control Module (SRSCM) 10.Occupant Classification System (Front passenger’s seat only) 11.Passenger Airbag Off Indicator (Front passenger’s seat only)

The SRSCM continually monitors all elements while the ignition is «ON» to determine if a frontal or near-frontal impact is severe enough to require airbag deployment or pre-tensioner seat belt deployment.

The SRS service reminder indicator (SRI) on the instrument panel will illuminate for about 6 seconds after the ignition key is turned to the «ON» position or after the engine is started, after which the SRI should go out.

B240B01L

The airbag modules are located both in the center of the steering wheel and in the front passenger’s panel above the glove box. When the SRSCM detects a sufficiently severe impact to the front of the vehicle, it will automatically deploy the front airbags.

FEATURESOFYOURHYUNDAI 1

Passenger’s Airbag

B240B02L		B240B03L		B240B01JM

Upon deployment, tear seams molded directly into the pad covers will separate under pressure from the expansion of the airbags. Further opening of the covers then allows full inflation of the airbags.

A fully inflated airbag, in combination with a properly worn seat belt, slows the driver’s or the passenger’s forward motion, reducing the risk of head and chest injury.

After complete inflation, the airbag immediately starts deflating, enabling the driver to maintain forward visibility, and the ability to steer or operate other controls.

!CAUTION:

When installing a container of liquid air freshener inside the vehicle, do not place it near the instrument cluster nor on the instrument panel surface. If there is any leakage from the air freshener onto these areas (instrument cluster, instrument panel or air ventilator), it may damage these parts. If the liquid from the air freshener does leak onto these areas, wash them with water immediately.

1FEATURESOFYOURHYUNDAI

Passenger’s Airbag

B240B05L

!WARNING:

oIf an airbag deploys, there may be a loud noise followed by a fine dust released in the vehicle. These conditions are normal and are not hazardous — the airbags are packed in this fine powder. The dust generated during airbag deployment may cause skin or eye irritation as well as aggravate asthma for some persons. Always wash all exposed skin areas thoroughly with lukewarm water and a mild soap after an accident in which the airbags were deployed.

!WARNING:

oThe SRS can function only when the ignition key is in the «ON» position. If the SRS SRI does not illuminate or continuously remains on after illuminating for about 6 seconds when the ignition key is turned to the «ON» position, or after the engine is started, illuminates while driving, the SRS is not working properly. If this occurs, have your vehicle immediately inspected by your Hyundai dealer.

oBefore you replace a fuse or disconnect a battery terminal, turn the ignition key to the «LOCK» position or remove the ignition key. Never remove or replace the air bag related fuse(s) when the ignition key is in the «ON» position. Failure to heed this warning will cause the SRS SRI to illuminate.

B990A03JM-AAT

OCCUPANT CLASSIFICATION SYSTEM

Your vehicle is equipped with an occupant classification system in the front passenger’s seat.

The Occupant Classification system is designed to detect the presence of a properlyseated front passenger and determine if the passenger’s front airbag should be enabled (may inflate) or not. The driver’s front airbag is not affected or controlled by the Occupant Classification system.

B990A01JM

If the front passenger seat is occupied by a person that the system determines to be of adult size, and he/she sits properly (sitting upright with the seatback in an upright position, centered on the seat cushion with their seat belt on,

Loading…

Источник

Page 1
2008…
Page 2
A020A01A-AAT RESPONSIBILITY FOR MAINTENANCE The maintenance requirements for your new Hyundai are found in Section 5. As the owner, it is your responsibility to see that all maintenance operations specified by the manufacturer are carried out at the appropriate intervals.
Page 3: Specifications

Specifications A030A01JM All information in this Owner’s Manual is current at the time of publication. However, Hyundai reserves the right to make changes at any time so that our policy of continual product improvement may be carried out. This manual applies to all Hyundai models and includes descriptions and explanations of optional as well as standard equipment.
Page 4
Your Hyundai should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your Hyundai and may, in addition, violate conditions of the limited warranties covering the vehicle. Certain modifications may also be in violation of regulations established by the U.S. Department of Transportation and other federal or state agencies.
Page 5
A090A01A-AAT SAFETY AND VEHICLE DAMAGE WARNING This manual includes information titled as WARNING, CAUTION and NOTE. These titles indicate the following: WARNING: This indicates that a condition may result in harm, serious injury or death to you or other persons if the warning is not heeded.
Page 6
To retrieve this information, special equipment is needed and access to the vehicle or the device that stores the data is required. Hyundai will not access information about a crash event or share it with others except:…
Page 7
Your Owner’s Manual will introduce you to the features and operation of your new Hyundai. It is suggested that you read it carefully because the information it contains can contribute greatly to the satisfaction you receive from your new car.
Page 8
Hyundai Warranty. 3. How can you tell if you are purchasing Hyundai Genuine Parts? Look for the Hyundai Genuine Parts Logo on the package (see below). Hyundai Genuine Parts exported to the United States are packaged with labels written only in English.
Page 9: Table Of Contents

TABLE OF CONTENTS FEATURES OF YOUR HYUNDAI DRIVING YOUR HYUNDAI WHAT TO DO IN AN EMERGENCY CORROSION PREVENTION & APPEARANCE CARE VEHICLE MAINTENANCE REQUIREMENTS SECTION DO-IT-YOURSELF MAINTENANCE EMISSION CONTROL SYSTEMS CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS…
Page 10: Instruments And Controls

INSTRUMENTS AND CONTROLS B250A01JM-AAT B250A01JM-U…
Page 11
Panel Brightness Control Knob (Rheostat Switch) 4WD Lock Switch (If installed) Traction Control System (TCS) Switch (If installed) / Electronic Stability Control (ESC) Switch (If installed) Instrument Cluster Multi-Function Light Switch (If installed) Front Window Defroster (If installed) / Aux Outlet (If installed) Hazard Warning Light Switch Digital Clock Windshield Wiper/Washer Switch…
Page 12
YOUR VEHICLE AT A GLANCE B255A03JM-AAT INDICATOR SYMBOLS ON THE INSTRUMENT PANEL SRS (Airbag) Service Reminder Indicator (SRI) Turn Signal Indicator Lights Seat Belt Reminder Light and Chime High Beam Indicator Light Low Oil Pressure Warning Light Parking Brake/Brake Fluid Level Warning Light Charging System Warning Light Tail Gate Open Warning Light Door Ajar Warning Light and Chime (If installed)
Page 13: Features Of Your Hyundai

FEATURES OF YOUR HYUNDAI Fuel Recommendations … 1-2 Breaking in Your New Hyundai … 1-3 Keys … 1-3 Door … 1-4 Power Windows … 1-11 Seats … 1-12 Seat Belts… 1-18 Child Restraint System … 1-25 Supplemental Restraint (AIRBAG) system … 1-33 Instrument Cluster and Indicator Lights …
Page 14: Fuel Recommendations

B010D01A-AAT Do Not Use Methanol Fuels containing methanol (wood alcohol) should not be used in your Hyundai. This type of fuel can reduce vehicle performance and damage components of the fuel system. CAUTION: Your Hyundai’s New Vehicle Limited War-…
Page 15: Breaking In Your New Hyundai

Emission Control System. B010F01A-AAT Operation in Foreign Countries If you are going to drive your Hyundai in another country, be sure to: o Observe all regulations regarding registra- tion and insurance.
Page 16: Door

B030B01HR A code number is stamped on the number plate that came with the keys to your Hyundai. This key number plate should not be left with the keys but kept in a safe place, not in the vehicle. The key number should also be recorded in a place where it can be found in an emergency.
Page 17
«LOCK» position so that the red mark on the switch is not visible, then close the door. FEATURES OF YOUR HYUNDAI NOTE: o When pushing the lock switch of the driver’s door to the «LOCK»…
Page 18
FEATURES OF YOUR HYUNDAI B040D01O-AAT Locking From the Inside (Driver’s side) LOCK UNLOCK HJM2008 To lock the door from the inside, simply close the door and push the lock switch to the «LOCK» position. NOTE: o When pushing the lock switch of the driver’s door to the «LOCK»…
Page 19
B040E04A-AAT Child-Protector Rear Door Lock HJM2011 Your Hyundai is equipped with left and right side «child-protector» rear door locks. When the lock mechanism is engaged, the rear door cannot be opened from the inside. Its use is recommended whenever there are small children in the rear seat.
Page 20
When the transmitter does not work cor- rectly, open and close the door with the ignition key. If you have a problem with the transmitter, contact an authorized Hyundai Dealer. NOTE: Keep the transmitter away from water or any liquid.
Page 21
30 seconds (This will repeat 3 times). To turn off the system, unlock the door or tail gate using the transmitter or the ignition key. FEATURES OF YOUR HYUNDAI B075D01JM-AAT Disarmed Stage The system will be disarmed by using the transmitter or the ignition key.
Page 22
FEATURES OF YOUR HYUNDAI B075E01JM-AAT Panic Warning PANIC B075E01JM 1. Push the «PANIC» button on the back side of the transmitter. 2. At the same time, the siren will sound and the turn signal lights will blink for 30 seconds.
Page 23: Power Windows

If the front doors are opened during this 30 second period, the power windows can no longer be operated without the ignition key turned to the «ON» position. FEATURES OF YOUR HYUNDAI Close Open HJM2016 WARNING:…
Page 24: Seats

FEATURES OF YOUR HYUNDAI SEATS B080A02A-AAT ADJUSTABLE FRONT SEATS WARNING: o Never adjust the driver’s seat while the vehicle is moving. Any sudden or unex- pected movement of the seat could cause you to lose control of the vehicle result- ing in an accident.
Page 25
To remove the headrest, raise it as far as it can go then press the lock knob while pulling upward. This should only be done when the seat is not occupied. FEATURES OF YOUR HYUNDAI B080E01JM-GAT Forward and backward adjustment (if installed)
Page 26
FEATURES OF YOUR HYUNDAI WARNING: B080D01JM o For maximum effectiveness in case of an accident the headrest should be ad- justed so the middle of the headrest is at the same height as the top of the occupant’s eyes. For this reason, the…
Page 27
3. When returning the seatback to the upright position, ensure the seatback is completely locked into place. FEATURES OF YOUR HYUNDAI WARNING: o Do not sit on the seatback table. o Do not place items on the seatback table when the vehicle is in motion.
Page 28
FEATURES OF YOUR HYUNDAI During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the «OFF» position. NOTE: o The seat warmer will not operate if the ambient temperature is higher than 82.4°F ±…
Page 29
In addition, do not allow the seatbelt webbing or buckle to get caught or pinched in the rear seat. FEATURES OF YOUR HYUNDAI WARNING: o When you return the rear seatback to its upright position, be sure it is locked into position.
Page 30: Seat Belts

FEATURES OF YOUR HYUNDAI SEAT BELTS B150A02S-AAT SEAT BELT PRECAUTIONS WARNING: All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a collision or sudden stop.
Page 31
Drivers and passengers should always sit well back in their seats, properly belted (see page 1-21), and with the seatbacks upright. FEATURES OF YOUR HYUNDAI B160A02A-AAT CARE OF SEAT BELTS Seat belt systems should never be disassembled or modified.
Page 32
This should be done even if no damage is visible. Additional ques- tions concerning seat belt operation should be directed to your Hyundai Dealer. B170A05Y-AAT HEIGHT ADJUSTABLE FRONT SEAT SHOULDER BELT…
Page 33
Although a combination retractor is also installed in the front passenger seat position, Hyundai strongly recommends that children always be seated in the rear seat. NEVER place any infant restraint system in the front seat of the vehicle.
Page 34
FEATURES OF YOUR HYUNDAI NOTE: Although the combination retractor pro- vides the same level of protection for seated passengers in either emergency or auto- matic locking modes, it is recommended that seated passengers use the emergency locking feature for improved convenience.
Page 35
If you lean forward in a slow, easy motion, the belt will extend and let you move FEATURES OF YOUR HYUNDAI around. If there is a sudden stop or impact, the belt will lock into position. It will also lock if you try to lean forward too quickly.
Page 36
FEATURES OF YOUR HYUNDAI WARNING: o Never unlock the metal tab (a) and the buckle (b) with the following excep- tions. (1) In case of folding rear seatbacks down. (2) If transporting an object on the rear seat may cause damage to the rear seat center belt.
Page 37: Child Restraint System

Children may be seriously injured or killed by an inflating airbag. All children, even those too large for child restraints, must ride in the rear seat. FEATURES OF YOUR HYUNDAI WARNING: To reduce the chance or serious or fatal injuries: o Children of all ages are safer when re- strained in the rear seat.
Page 38
FEATURES OF YOUR HYUNDAI WARNING: o Never allow two children, or any two persons, to use the same seat belt. o Children often squirm and reposition themselves improperly. Never let a child ride with the shoulder belt under their arm or behind their back. Always prop- erly position and secure children in rear seat.
Page 39
B230B01JM Front of Vehicle 2. Route the child restraint seat tether strap over the seatback. FEATURES OF YOUR HYUNDAI For vehicles with adjustable headrests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.
Page 40
FEATURES OF YOUR HYUNDAI WARNING: o Never mount more than one child re- straint to a single tether or to a single lower anchorage point. The increased load caused by multiple seats may cause the tethers or anchorage points to break, causing serious injury or death.
Page 41
Always follow the child seat manufacturer’s instructions for installation and use. FEATURES OF YOUR HYUNDAI B230F01JM-AAT Child Restraint System Installation on Rear Seat Center Position…
Page 42
If the seat belt does not operate as de- scribed, have the system checked imme- diately by your authorized Hyundai dealer. WARNING: o If the retractor is not in the Automatic Locking mode, the child restraint can move when your vehicle turns or stops suddenly.
Page 43
B180B05JM-AAT Pre-tensioner Seat Belt Your Hyundai vehicle is equipped with driver’s and front passenger’s pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant’s body in certain frontal collisions.
Page 44
Do not attempt to inspect or replace the pre-tensioner seat belts yourself. This must be done by an authorized Hyundai dealer. o Do not strike the pre-tensioner seat belt assemblies.
Page 45: Supplemental Restraint (Airbag) System

RESTRAINT (AIRBAG) SYSTEM (SRS) B240A02E-AAT Driver’s Airbag B240A01JM Your Hyundai is equipped with an advanced Supplemental Restraint (Airbag) System. The indications of the system’s presence are the letters «SRS AIRBAG» embossed on the airbag pad cover in the steering wheel and the passenger’s side front panel pad above the glove box.
Page 46
If the SRS airbag warning light (see pg 1- 48) remains illuminated while the vehicle is being driven, have an authorized Hyundai dealer inspect the airbag sys- tem as soon as possible. o Airbags can only be used once – have an authorized Hyundai dealer replace the airbag immediately after deployment.
Page 47
If the airbags deploy, they must be re- placed by an authorized Hyundai dealer. Deployed airbags WILL NOT inflate again and will provide no protection in subse- quent collisions.
Page 48
FEATURES OF YOUR HYUNDAI WARNING: o Sitting improperly or out of position can result in serious or fatal injury in a crash. All occupants should sit upright with the seat back in an upright position, centered on the seat cushion with their…
Page 49
After complete inflation, the airbag immediately starts deflating, enabling the driver to maintain forward visibility, and the ability to steer or operate other controls. FEATURES OF YOUR HYUNDAI Passenger’s Airbag B240B01JM CAUTION: When installing a container of liquid air…
Page 50
SRS is not working properly. If this occurs, have your vehicle immedi- ately inspected by your Hyundai dealer. o Before you replace a fuse or disconnect a battery terminal, turn the ignition key to the «LOCK»…
Page 51
Riding in an improper position or placing weight on the front passenger’s seat when it is unoccupied by a passenger adversely affects the occupant classification system (OCS). FEATURES OF YOUR HYUNDAI B990A08O o NEVER put a heavy load in the front passenger seat. B990A03O o NEVER excessively recline the front pas- senger seatback.
Page 52
FEATURES OF YOUR HYUNDAI B990A02O o NEVER sit with hips shifted towards the front of the seat. B990A05O — NEVER place feet on the dashboard. B990A07O — NEVER lean on the center console. — NEVER sit on one side of the front passen- ger seat.
Page 53
If the «PASSENGER AIR BAG OFF» indicator remains illuminated after the passenger repositions themselves prop- erly and the car is restarted, Hyundai recom- mends that passenger move to the rear seat because the passenger’s front airbag will not deploy.
Page 54
BAG OFF» indicator. B990B02JM-AAT Side Impact Airbag B990B02JM Your Hyundai is equipped with a side impact airbag in each front seat. The purpose of the airbag is to provide the vehicle’s driver and/or the front passenger with additional protection than that offered by the seat belt alone. The side…
Page 55
To prevent unexpected deployment of the side impact air bag that may result in personal injury, avoid impact to the side airbag sensor when the ignition key is on. FEATURES OF YOUR HYUNDAI B990C01LZ-GAT Curtain Airbag Curtain Airbag HJM2056 Curtain airbags are located along both sides of the roof rails above the front and rear doors.
Page 56
Hyundai dealer. o Do not replace the bumper or the bumper guard with the one other than the Hyundai genuine parts. Otherwise, it can ad- versely affect SRS performance and lead…
Page 57
All infants and children should be properly restrained in appropriate child safety seats or seat belts in the rear seat. FEATURES OF YOUR HYUNDAI WARNING: o Sitting improperly or out of position can cause occupants to be shifted too close…
Page 58: Instrument Cluster And Indicator Lights

FEATURES OF YOUR HYUNDAI INSTRUMENT CLUSTER AND INDICATOR LIGHTS B260A02JM-AAT B260A01JM-U…
Page 59
21. Low Tire Pressure Telltale (If installed) 22. TPMS (Tire Pressure Monitoring System) Malfunction Indicator (If installed) 23. Coolant Temperature Gauge 24. Cruise Indicator (If installed) 25. 4WD Lock Indicator Light 26. 4WD System Warning Light (If installed) FEATURES OF YOUR HYUNDAI…
Page 60: Warning And Indicator Lights

If the light stays on with the engine running, turn the engine off imme- diately. In any instance where the oil light stays on when the engine is running, the engine should be checked by a Hyundai dealer before the car is driven again.
Page 61
After adding fluid, if no other trouble is found, the car should be immediately and care- fully driven to a Hyundai dealer for inspection. If further trouble is experienced, the vehicle should not be driven at all but taken to a dealer by a professional towing service.
Page 62
ABS. If this occurs, have your vehicle checked by your Hyundai dealer as soon as possible. The normal braking system will still be operational, but without the assistance of the anti-lock brake system.
Page 63
«ON» position, but should go out after three seconds. If the ESC or ESC-OFF indicator stays on, take your car to your autho- rized Hyundai dealer and have the system checked. See section 2 for more information about the ESC.
Page 64
Monitoring System is not working porperly. If this occurs, have your vehicle checked by an authorized Hyundai dealer as soon as possible. The warning light also comes on and stays on when there is a problem with the Tire Pressure Monitoring System.
Page 65
Then open the hood and, after the engine has cooled, check the coolant level and the water pump drive belt. If you suspect cooling system trouble, have your cooling system checked by a Hyundai dealer as soon as possible.
Page 66
This can cause severe engine damage and may void your warranty. B300A01A-AAT SPEEDOMETER B300A01JM Your Hyundai’s speedometer is calibrated in miles per hour (on the outer scale) and kilome- ters per hour (on the inner scale). B310B02JM-GAT ODOMETER/TRIP ODOMETER (AT)
Page 67
Trip Computer Switch HJM2185 Pushing in the trip computer switch behind the right side of the steering wheel changes the display as follows; FEATURES OF YOUR HYUNDAI TRIPMETER A TRIPMETER B DISTANCE TO EMPTY AVERAGE FUEL CONSUMPTION AVERAGE SPEED…
Page 68
FEATURES OF YOUR HYUNDAI 1. Tripmeter Tripmeter HJM2186-C o This mode indicates the total distance trav- elled since the last tripmeter reset. Total distance is also reset to zero if the battery is disconnected. o Pressing the trip computer switch for more than 1 second, when the tripmeter is being displayed, clears the tripmeter to zero.
Page 69
MPH. o Press the trip computer switch for more than 1 seconds, when the average speed is being displayed, clears the average speed to «—«. FEATURES OF YOUR HYUNDAI 5. Drive Time Drive Time HJM2187-C o This mode indicates the drive time since the last tripmeter reset.
Page 70: Multi-Function Light Switch

Check for a burned- out fuse or bulb or see your Hyundai dealer. B340B01A-AAT Lane Change Signal…
Page 71
To flash the headlights, pull the switch lever toward you, then release it. The headlights can be flashed even though the headlight switch is in the «OFF» position. FEATURES OF YOUR HYUNDAI B340G01L-GAT Auto Light (If installed) HJM2085 To operate the automatic light feature, turn the barrel on the end of the multi-function switch.
Page 72: Windshield Wiper/Washer Switch

FEATURES OF YOUR HYUNDAI WINDSHIELD WIPER AND WASHER SWITCH B350A01JM-AAT Windshield wiper/washer Type A Type B Rear window wiper/washer (If installed) Type A Type B B350A06JM-U/B350A07JM-U/B350A08JM-U/B350A09JM-U A : Wiper speed control · MIST – Single wipe · OFF – Off ·…
Page 73
FEATURES OF YOUR HYUNDAI B350B01JM-GAT Windshield Washer Operation Type A B350B03JM-U…
Page 74
FEATURES OF YOUR HYUNDAI When the washer lever is operated, the wipers automatically three passes across the wind- shield. The washer continues to operate until the lever is released. NOTE: o Do not operate the washer more than 15 seconds at a time or when the fluid reservoir is empty.
Page 75
(If installed) Type A B390A02JM-U Type B B390A03JM-U FEATURES OF YOUR HYUNDAI : The rear window wiper starts to operate three times after the washer fluid sprays onto the rear window. OFF : Wiper is not in operation INT : The interval between wipes operates every 5 seconds intermittently.
Page 76
FEATURES OF YOUR HYUNDAI FRONT FOG LIGHT SWITCH B360A04A-AAT (If installed) HJM2097 To turn on the front fog lights, push the switch. They will light when the headlight switch is in the second position and the ignition key is in the «ON»…
Page 77
When using a portable audio device con- nected to the power outlet, noise may occur during playback. If this happens, use the power source of the portable audio device. FEATURES OF YOUR HYUNDAI DIGITAL CLOCK B400A02A-AAT HJM2137 There are three control buttons for the digital clock.
Page 78
Do not hold the cigarette lighter pressed in. This can damage the heating element and create a fire hazard. If it is necessary to replace the cigarette lighter, use only a genuine Hyundai replacement or its approved equivalent. POWER OUTLETS B500D03JM-GAT…
Page 79
The ashtray coin tray light will only illuminate when the external lights are on. FEATURES OF YOUR HYUNDAI DRINK HOLDER B450A01JM-AAT Front Drink Holder…
Page 80: Sunroof

SUNROOF B460A01Y-AAT (If installed) Sun Shade HJM2029 Your HYUNDAI is equipped with a sliding sun- shade which you can manually adjust to let in light with the sunroof closed, or to block sunlight. WARNING: Never adjust the sunshade while driving.
Page 81
Do not press any sunroof control button longer than necessary. Damage to the motor or system compo- nents could occur. FEATURES OF YOUR HYUNDAI B460C01JM-AAT Tilting the Sunroof HJM2024 Auto tilt open To use the autotilt feature, momentarily (more than 1 second) press the TILT UP button on the overhead console.
Page 82
FEATURES OF YOUR HYUNDAI Close To close the sunroof, press the CLOSE button on the overhead console and hold it until the sunroof is closed. NOTE: After washing the car or after there is rain, be sure to wipe off any water that is on the sunroof before operating it.
Page 83
ON In the «ON» position, the light stays on at all times. Do not leave this button pressed for an extended period of time when the vehicle is not running. FEATURES OF YOUR HYUNDAI SPECTACLE CASE B491A03O-GAT (If Installed) HJM2158 The spectacle case is located on the front overhead console.
Page 84
FEATURES OF YOUR HYUNDAI GLOVE BOX B500A01S-AAT HJM2145 o To open the glove box, pull on the glove box release lever. o The glove box door can be locked (and unlocked) with the key. (If installed) WARNING: To avoid the possibility of injury in case of…
Page 85
FEATURES OF YOUR HYUNDAI CAUTION: If the mirror control is jammed with ice, do not attempt to break it free using the control handle or by manipulating the face of the mirror.
Page 86
FEATURES OF YOUR HYUNDAI B510B01Y-AAT Electric Type (If installed) HJM2073 The outside rearview mirrors can be adjusted to your preferred rear vision, both directly be- hind the vehicle, and to the rear of the left and right sides. The remote control outside rearview mirror switch controls the adjustments for both right and left outside mirrors.
Page 87: Mirror

MIRROR B520A01A-AAT Manual Type HJM2070 Your Hyundai is equipped with a day/night inside rearview mirror. The «night» position is selected by flipping the tab at the bottom of the mirror toward you. In the «night» position, the glare of headlights of cars behind you is reduced.
Page 88
FEATURES OF YOUR HYUNDAI 1. To operate Compass feature Press and release the button, then the vehicle’s directional heading will be displayed. Pressing and releasing the button again will turn off the display. Heading display — E : East — W : West…
Page 89
P (Park) position on automatic transaxle vehicles. FEATURES OF YOUR HYUNDAI CAUTION: Driving with the parking brake applied will cause excessive brake pad (or lining) and brake rotor wear.
Page 90
FEATURES OF YOUR HYUNDAI TAIL GATE B540A01JM-AAT B540A01JM o Pull and raise the «DOOR» release lever to open the tail gate. o To close, lower the door, then press down on it until it locks. To be sure the door is securely fastened, try to pull it up again.
Page 91: How To Use Luggage Room

In the «ON» position, the light stays on at all times. o In the «OFF» position, the light stays off at all times. FEATURES OF YOUR HYUNDAI HOW TO USE LUGGAGE ROOM B640A01S-AAT CARGO SECURITY SCREEN (If installed)
Page 92
FEATURES OF YOUR HYUNDAI 2. For better fuel economy, do not carry unnec- essary weight. 3. Never allow anyone to ride in the luggage compartment. It is designed for luggage only. 4. Try to maintain the balance of the vehicle and locate the weight as far forward as possible.
Page 93
ROOF RACK B630A01JM-AAT (If installed) HJM2162 If your Hyundai has a roof rack, you can load things on top of your vehicle. Crossrails and fixing components to adapt the roof rack on your vehicle may be obtained from an authorized Hyundai dealer.
Page 94
FEATURES OF YOUR HYUNDAI CAUTION: 165 lbs (75 kg) Evenly ROOF RACK Distributed o Loading cargo or luggage above 165 lbs (75 kg) on the roof rack may damage your vehicle. When you carry large objects, never let them hang over the rear or the sides of your vehicle.
Page 95
If the filler cap must be replaced, only use genuine Hyundai re- placement parts. o After refueling, make sure the fuel cap is installed securely to prevent fuel spill- age in the event of an accident.
Page 96: Hood Release

FEATURES OF YOUR HYUNDAI HOOD RELEASE B570A03A-GAT HJM2020 1. Pull the release knob to unlatch the hood. HJM2021 2. Push the secondary latch lever to the left and lift the hood. HJM2022 3. Hold the hood open with the support rod.
Page 97
SUN VISOR B580A01L-AAT B580A02JM Your Hyundai is equipped with sun visors to give the driver and front passenger either frontal or sideward shade. To reduce glare or to shut out direct rays of the sun, turn the sun visor down.
Page 98
FEATURES OF YOUR HYUNDAI B580C01LZ-AAT TICKET HOLDER B580C01JM The ticket holder is provided on the front of the sun visor for holding a tollgate ticket. STEERING WHEEL TILT LEVER B600A01A-AAT HJM2067 To Adjust the Steering Wheel: 1. Push the lever downward to unlock.
Page 99: Cruise Control

Press the pad on the steering wheel to sound the horn. REAR SEAT ARM REST B611A01Y-AAT HJM2043 This arm rest is located in the center of the rear seat back. FEATURES OF YOUR HYUNDAI CRUISE CONTROL B660A02S-AAT (If installed) Type A Main Switch B660A01JM…
Page 100
FEATURES OF YOUR HYUNDAI The cruise control system provides automatic speed control for your comfort when driving on straight, open freeways, toll roads, or other noncongested highways. This system is de- signed to function above approximately 25 mph (40 km/h).
Page 101
Shift the selector lever to «P» or «N» position (Automatic transaxle). o Decrease the vehicle speed to less than 25 mph (40 km/h). o Release the main switch. FEATURES OF YOUR HYUNDAI B660D02E-AAT To Resume the Preset Speed Type A B660D01JM…
Page 102
FEATURES OF YOUR HYUNDAI The vehicle will automatically resume the speed set prior to cancellation when you push the control switch upward to the «RES/ACC» or «+/ RES» position and release it, providing the vehicle speed is above 25 mph (40 km/h).
Page 103
This is an indication of normal system operation. o During normal cruise control operation, when the «SET(COAST)» is activated or reactivated after applying the brakes, the cruise control will energize after approximately 3 seconds. This delay is normal. FEATURES OF YOUR HYUNDAI…
Page 104: Heating And Cooling Control

FEATURES OF YOUR HYUNDAI HEATING AND COOLING CONTROL B710A01JM-GAT 1. Side Defroster Nozzle 2. Side Ventilators 3. Windshield Defroster Nozzles 4. Center Ventilators B710B02O-AAT CENTER VENTILATOR The center ventilators are located in the middle of the dashboard. To change the direction of the air flow, move the knob in the center of the vent up-and-down and side-to-side.
Page 105
The blower fan speed, and therefore the volume of air delivered from the system, may be con- trolled manually by setting the blower control between the «1» and «4» position. FEATURES OF YOUR HYUNDAI B670C03E-AAT Air Intake Control HJM2118A This is used to select fresh outside air or recirculating inside air.
Page 106
FEATURES OF YOUR HYUNDAI With the «Fresh» mode selected, air enters the vehicle from the outside and is heated or cooled according to the function selected. With the «Recirculation» mode selected, air from within the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.
Page 107
HJM2113 Floor-Level Air is discharged through the floor vents, wind- shield defroster nozzle, side defroster nozzle and side ventilator. FEATURES OF YOUR HYUNDAI HJM2112 Floor-Defrost Level Air is discharged through the windshield de- froster nozzle, the floor vents, side defroster nozzle and side ventilator.
Page 108
FEATURES OF YOUR HYUNDAI HJM2115 Defrost-Level Air is discharged through the windshield de- froster nozzle, side defroster nozzle and side ventilator. If the «Defrost» mode is selected, the A/C will be turned turn on automatically and «Fresh» mode will be activated to improve windshield defrost- ing.
Page 109
Temperature Control Cool Warm HJM2117 This control is used to adjust the degree of heating or cooling desired. FEATURES OF YOUR HYUNDAI HEATING CONTROLS B690A01E-AAT B690A01JM-A For normal heating operation, set the air intake control to the fresh air (…
Page 110
FEATURES OF YOUR HYUNDAI BI-LEVEL HEATING B700A02E-AAT B700A01JM-A Your Hyundai is equipped with bi-level heating controls. To use this feature: o Set the air intake control to the fresh air ) position. o Set the air flow control at the bi-level ( position.
Page 111
The tempera- ture may be moderated by moving the con- trol toward «Warm».) FEATURES OF YOUR HYUNDAI o Adjust the fan control to the desired speed. For greater cooling, turn the fan control to one of the higher speeds or temporarily select the «Recirculation (…
Page 112
FEATURES OF YOUR HYUNDAI B740D01A-AAT Operation Tips o If the interior of the car is hot when you first get in, open the windows for a few minutes to expel the hot air. o When you are using the air conditioning system, keep all windows closed to keep hot air out.
Page 113
Set the fan speed control to position «3» or «4». o Activate windshield wiper blade de-icer (If installed) ) or defrost level ( ) and fan speed control to the low position. FEATURES OF YOUR HYUNDAI B Type B720B02JM ) position.
Page 114
FEATURES OF YOUR HYUNDAI AUTOMATIC HEATING AND COOLING CONTROL SYSTEM B970A01Y-AAT (If installed) Your Hyundai is equipped with an automatic heating and cooling control system controlled by simply setting the desired temperature. B970B01JM-GAT Heating and Cooling Controls 1. Temperature Control Switch 2.
Page 115
62°F(17°C) by pushing the » » button. Each push of the button will cause the tem- perature to decrease by 1°F(0.5°C). FEATURES OF YOUR HYUNDAI NOTE: o If the battery has been discharged or disconnected, the temperature mode will reset to Centigrade degrees.
Page 116
FEATURES OF YOUR HYUNDAI B980A01Y-AAT MANUAL OPERATION The heating and cooling system can be con- trolled manually as well by pushing buttons other than the «AUTO» button. In this state, the system sequentially works according to the order of buttons selected.
Page 117
Fresh Mode : Air enters the vehicle from the outside and is heated or cooled according to the function selected. FEATURES OF YOUR HYUNDAI Recirculation Mode : Air from within the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.
Page 118
FEATURES OF YOUR HYUNDAI CAUTION: If the windows fog up with the Recircula- tion or A.Q.S mode selected, set the air intake control to the Fresh air position or A.Q.S control to «OFF». B980D01Y-AAT Heating and Cooling System Off Press the «OFF» button to stop the operation of the heating and cooling system.
Page 119
FEATURES OF YOUR HYUNDAI HJM2112 Floor-Defrost Level When selecting the «Floor-Defrost» mode, the indicator light will come on and the air will be…
Page 120
FEATURES OF YOUR HYUNDAI B980F01JM-GAT Defrost Switch B980F01JM When the «Defrost» button is pressed, the ( mode will be automatically selected and the air will be discharged through the windshield de- frost nozzle, side defroster nozzle and side ventilator. To assist in defrosting, the air condi- tioning will operate if ambient temperature is higher than 2°C, and automatically turns off if the…
Page 121: Stereo Sound System

These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere. In addition, they curve around obstructions so that they can provide better signal coverage. FEATURES OF YOUR HYUNDAI FM radio station Mountains Unobstructed area…
Page 122
WARNING: Hyundai recommends that you never use a cell phone while driving. This could result in loss of control, and an accident that may cause death, serious injury, or property damage.
Page 123: Audio System

AUDIO SYSTEM PA710E01JM-GAT RADIO, SET UP, VOLUME CONTROL (PA 710S) (If installed) FEATURES OF YOUR HYUNDAI 1. FM Selection Button 2. AM Selection Button 3. XM Selection Button 4. CD/AUX Selection Button 5. Automatic Channel Selection Button 6. Power ON/OFF 7.
Page 124
FEATURES OF YOUR HYUNDAI 1. FM Selection Button Turns to FM mode and toggles FM1 and FM2 when the button is pressed each time. 2. AM Selection Button Turns to AM mode, and toggles in the order of AM1➟AM2➟···➟AM1···when the button is pressed each time.
Page 125
Category Name becomes displayed. o If the Enter Key is not pressed within 5 FEATURES OF YOUR HYUNDAI seconds, then the previous mode will be restored. o If the Key is pressed while in the last Cat- egory, then the first category will become displayed and operation will be repeated.
Page 126
FEATURES OF YOUR HYUNDAI PA710F01JM-GAT CD (PA 710S) (If installed) 1. CD Loading Slot 2. CD Indicator 3. CD Eject Button 4. CD/AUX Selection Button 5. Automatic Track Selection Button 6. INFO Button 7. TUNE/ENTER Button 8. RANDOM Play Button 9.
Page 127
To listen to the displayed song, press the button to skip to the song and play. FEATURES OF YOUR HYUNDAI Pressing the changes the BASS, MIDR- ANGE, TREBLE, FADER and BALANCE TUNE mode. The mode selected is shown on the display.
Page 128
FEATURES OF YOUR HYUNDAI o BALANCE Control Rotate the knob clockwise to emphasize right speaker sound (left speaker sound will be attenuated). When the control knob is turned counter clockwise, left speaker sound will be emphasized (right speaker sound will be at- tenuated).
Page 129
PA760E01JM-GAT RADIO, SET UP, VOLUME CONTROL (PA 760S) (If installed) FEATURES OF YOUR HYUNDAI 1. FM Selection Button 2. AM Selection Button 3. XM Selection Button 4. CD/AUX Selection Button 5. Automatic Channel Selection Button 6. Power ON/OFF 7. MUTE Button 8.
Page 130
FEATURES OF YOUR HYUNDAI 1. FM Selection Button Turns to FM mode and toggles FM1 and FM2 when the button is pressed each time. 2. AM Selection Button Turns to AM mode, and toggles in the order of AM1➟AM2➟···➟AM1···when the button is pressed each time.
Page 131
Corresponding category can be selected by pressing ENTER. FEATURES OF YOUR HYUNDAI Moves [CAT ] Button when Category Down search operation. o Category is moved Down from the category currently being received and Category Name becomes displayed.
Page 132
FEATURES OF YOUR HYUNDAI PA760F01JM-GAT CDC (PA 760S) (If Installed) 1. CD Loading Slot 2. CD Eject Button 3. LOAD Button 4. CD/AUX Selection Button 5. Automatic Track Selection Button 6. INFO Button 7. TUNE/ENTER Button 8. RANDOM Play Button 9.
Page 133
Also, turn this button counterclockwise to dis- play songs before current song. FEATURES OF YOUR HYUNDAI To listen to the displayed song, press the button to skip to the song and play. Pressing the changes the BASS, MIDR- ANGE, TREBLE, FADER and BALANCE TUNE mode.
Page 134
FEATURES OF YOUR HYUNDAI o BALANCE Control Rotate the knob clockwise to emphasize right speaker sound (left speaker sound will be attenuated). When the control knob is turned counter clockwise, left speaker sound will be emphasized (right speaker sound will be at- tenuated).
Page 135
If you see any error indication in the display while using the system in the CD or Tape mode, find the cause in the chart below. If you cannot clear the error indication, take the car to your Hyundai dealer.
Page 136
FEATURES OF YOUR HYUNDAI CARE OF DISCS B850A02F-AAT Proper Handling B850A01L Handle your disc as shown. Do not drop the disc. Hold the disc so you will not leave finger- prints on the surface. If the surface is scratched, it may cause the pickup to skip signal tracks. Do not affix tape, paper, or gummed labels on the disc.
Page 137
Head Cotton applicator B860A02L FEATURES OF YOUR HYUNDAI o The playback head, capstan and pinch roll- ers will develop a coating of tape residue that can result in deterioration of sound quality, such as a wavering sound. They should be…
Page 138: Antenna

FEATURES OF YOUR HYUNDAI B860A03L NOTE: Look at a tape before you insert it. If the tape is loose, tighten it by turning one of the hubs with a pencil or your finger. If the label is peeling off, do not put it in the drive mechanism.
Page 139: Driving Your Hyundai

DRIVING YOUR HYUNDAI Engine Exhaust Can Be Dangerous! … 2-2 Before Starting the Engine … 2-4 Key Positions … 2-5 Starting … 2-6 Manual Transaxle … 2-7 Automatic Transaxle … 2-9 Anti-Lock Brake System (ABS) … 2-13 Traction Control System (TCS) … 2-13 Electronic Stability Control (ESC) …
Page 140: Engine Exhaust Can Be Dangerous

Hyundai dealer. o Do not run the engine in an enclosed area.
Page 141
If you nevertheless de- cide to equip your vehicle with any tire/ wheel combination not recommended by Hyundai for off-road driving, you should not use these tires for highway driving.
Page 142: Before Starting The Engine

TO START THE ENGINE C030A01E-AAT COMBINATION IGNITION SWITCH o If your Hyundai is equipped with a manual transaxle, place the shift lever in neutral and depress the clutch pedal fully. o If your Hyundai has an automatic transaxle, place the shift lever in «P»…
Page 143: Key Positions

If difficulty is experienced in turning the ignition key to the START position, turn the steering wheel right and left to release the tension and then turn the key. DRIVING YOUR HYUNDAI C070C01A-AAT To remove the ignition key LOCK START C070C01E-1 1.
Page 144: Starting

DRIVING YOUR HYUNDAI STARTING C050A01A-AAT C050A01E-1 WARNING: Never run the engine in a closed or poorly ventilated area any longer than is needed to move your car in or out of the area. The carbon monoxide gas emitted is odorless and can cause serious injury or death.
Page 145: Manual Transaxle

OPERATING THE MANUAL TRANSAXLE C070A02A-AAT HJM3017 Your Hyundai’s manual transaxle has a con- ventional shift pattern. This shift pattern is im- printed on the shift knob. The transaxle is fully synchronized in all forward gears so shifting to either a higher or a lower gear is easily accom- plished.
Page 146
DRIVING YOUR HYUNDAI C070D02O-AAT Recommended Shift Points Shift Recommended from-to mph (km/h) 15 (20) 25 (40) 35 (55) 45 (75) The shift points as shown on the chart are recommended for optimum fuel economy and performance. C070D04O-AAT Good Driving Practices o Never take the car out of gear and coast down a hill.
Page 147: Automatic Transaxle

OPERATING THE AUTOMATIC TRANSAXLE C090A01O-GAT HJM3018 The highly efficient Hyundai automatic transaxle has four forward speeds and one reverse speed. The individual speeds are selected au- tomatically, depending on the position of the speed selector lever. The selector lever has 2 gates;…
Page 148
DRIVING YOUR HYUNDAI C090B02A-AAT The function of each position is as fol- lows: o P (Park): Use to hold the vehicle in place when parked or while starting the engine. Whenever parking the car, apply the parking brake and shift the selec- tor lever to the «P»…
Page 149
It is always possible to shift from «R», «N», «D» position to «P» position. The vehicle must be fully stopped to avoid transaxle damage. DRIVING YOUR HYUNDAI C090I04L-GAT CAUTION: o Shift into «R», «D» and «P» position only when the vehicle has completely stopped.
Page 150
DRIVING YOUR HYUNDAI C090N05O-AAT Good Driving Practices o Never move the gear selector lever from «P» or «N» to any other position with the accelera- tor pedal depressed. o Never move the gear selector lever into «P» when the vehicle is in motion.
Page 151: Anti-Lock Brake System (Abs)

The safety features of an ABS / TCS / ESC equipped vehicle should not be tested by high speed driving or cornering. This could endanger the safety of yourself or others. DRIVING YOUR HYUNDAI TRACTION CONTROL SYSTEM (TCS) C300A03Y-GAT (If installed)
Page 152
DRIVING YOUR HYUNDAI Driving Hints TCS does not actively apply brakes. Be sure to decelerate the car sufficiently before entering curves. CAUTION: When the TCS indicator blinks, SLIP con- trol function has been activated. It also means that the road is slippery or your car is accelerating excessively.
Page 153: Electronic Stability Control (Esc)

It is still your responsibility to drive and corner at reasonable speeds and to leave a sufficient margin of safety. DRIVING YOUR HYUNDAI CAUTION: Driving with varying tire or wheel size may cause the ESC system to malfunction. When replacing tires, make sure they are the same size as your original tires.
Page 154: Full-Time 4Wd Operation

DRIVING YOUR HYUNDAI C310D01JM-AAT Indicators and Warning The indicators should illuminate when the igni- tion key is turned to ON or START but should go out after three seconds. If the indicators do not illuminate, or the ESC or ESC-OFF indicator does not go out after 3 seconds, have the vehicle checked by an authorized dealer.
Page 155
If you nevertheless de- cide to equip your vehicle with any tire/ wheel combination not recommended by Hyundai for off-road driving, you should not use these tires for highway driving. (8) The full-time 4WD vehicle cannot be towed by an ordinary tow truck. Make sure that the vehicle is towed with all four wheels raised off the ground.
Page 156
DRIVING YOUR HYUNDAI (9) For a speedometer test or inspection/main- tenance (I/M) program of a Tucson 4WD vehicle, use a four wheel chassis dynamom- eter. CAUTION: Never engage the parking brake while per- forming these tests. o In rare cases when it’s unavoidable that…
Page 157: 4Wd Lock System

To release the 4WD lock function, press the 4WD lock button again. The 4WD lock indicator light in the instrument cluster should go off. DRIVING YOUR HYUNDAI C360A02JM 1) Pressing the 4WD lock button on the tough terrain, the driving power is equally distrib- uted to the front and rear.
Page 158
DRIVING YOUR HYUNDAI Four Wheel Drive (4WD) transfer mode selection Transfer mode Selection button 4WD LOCK 4WD AUTO (4WD LOCK is deactivated) NOTE: o When driving on normal roads, deactivate the 4WD LOCK mode by pushing the 4WD LOCK button(the indicator light goes off). Driving on normal roads with 4WD LOCK mode(especially, when cornering) may cause mechanical noise or vibration.
Page 159: Good Braking Practices

Hyundai dealer for assistance. o Don’t coast down hills with the car out of gear. This is extremely hazardous. Keep the car…
Page 160: Driving For Economy

(see Section 5 for details). o Keep your car clean. For maximum service, your Hyundai should be kept clean and free of corrosive materials. It is especially impor- tant that mud, dirt, ice, etc. not be allowed to accumulate on the underside of the car.
Page 161: Winter Driving

Check Battery and Cables Winter puts additional burdens on the battery system. Visually inspect the battery and cables as described in Section 6. The level of charge in your battery can be checked by your Hyundai dealer or a service station.
Page 162
Window washer anti- freeze is available from Hyundai dealers and most auto parts outlets. Do not use engine coolant or other types of anti-freeze as these may damage the paint finish.
Page 163
3. Drive belt: A loose or damaged drive belt may result in overheating of the engine. DRIVING YOUR HYUNDAI USE OF LIGHTS C180A01A-AAT Check your lights regularly for correct opera- tion and always keep them clean. When driving during the day in conditions of poor visibility, it is helpful to drive with headlights on low beam.
Page 164: Trailer Or Vehicle Towing

Since laws vary from State to State the require- ments for towing trailers, cars, or other types of vehicles or apparatus may differ. Ask your Hyundai dealer for further details before towing. CAUTION: Do not do any towing with your car during its first 1,200 miles (2,000 km) in order to allow the engine to properly break in.
Page 165
Improper trailer loading and/or too much luggage in the cargo area can overload the rear axle. Redistribute the load and check the axle weight again. DRIVING YOUR HYUNDAI CAUTION: The following specifications are recom- mended when towing a trailer. The loaded trailer weight cannot safely exceed the val- ues in the chart.
Page 166
DRIVING YOUR HYUNDAI WARNING: o Improperly loading your vehicle and trailer can seriously affect its steering and braking performance causing a crash which could cause serious injury or death. o Towing a trailer affected vehicle han- dling and braking. o Drive more slowly when towing a trailer and allow more distance when braking.
Page 167: Vehicle Load Limit

C190F03JM-AAT Tire and Loading Information Label Type A I030A01JM Type B I03A01JM-A DRIVING YOUR HYUNDAI Type C I030A02-A The tire label located on the driver’s side of the center pillar outer panel gives the original tire size, cold tire pressures recommended for your ve-…
Page 168
DRIVING YOUR HYUNDAI Seating capacity: Total: 5 persons (Front seat: 2 persons, Rear seat: 3 persons) Seating capacity is the maximum num- ber of occupants including a driver, your vehicle may carry. However the seating capacity may be reduced based upon the weight of all of the occupants, and the weight of the cargo being carried or towed.
Page 169
(635 kg) Subtract Occupant Weight 750 lbs 150 lbs (68 kg) x 5 (340 kg) Available Cargo and 650 lbs Luggage Weight (295 kg) DRIVING YOUR HYUNDAI Example 3 C190F03JM Item Description Total 1400 lbs Vehicle Capacity Weight (635 kg)
Page 170
DRIVING YOUR HYUNDAI Refer to your vehicle’s tire and loading information label for specific informa- tion about your vehicle’s capacity weight and seating positions. The combined weight of the driver, passengers and cargo should never exceed your vehicle’s capacity weight.
Page 171
A crash resulting from poor han- dling vehicle damage, tire failure, or increased stopping distances could result in serious injury or death. DRIVING YOUR HYUNDAI NOTE: o Overloading your vehicle may cause damage. Repairs would not be covered by your warranty. Do not overload your vehicle.
Page 172
DRIVING YOUR HYUNDAI WARNING: Items you carry inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. o Put things in the cargo area of your vehicle. Try to spread the weight evenly.
Page 173
WHAT TO DO IN AN EMERGENCY If the Engine will not Start … 3-2 Jump Starting … 3-3 If the Engine Overheats … 3-4 Tire Pressure Monitoring System (TPMS) … 3-5 Spare Tire … 3-9 If You Have a Flat Tire … 3-10 Changing a Flat Tire …
Page 174: What To Do In An Emergency

Reconnect any that may be disconnected or loose. 3. Check the fuel line in the engine compart- ment. 4. If the engine still does not start, call a Hyundai dealer or seek other qualified assistance. D010D01A-AAT If Engine Stalls While Driving 1.
Page 175: Jump Starting

2,000 rpm for several minutes. 6. Carefully remove the jumper cables in the reverse order of attachment. If you do not know why your battery became discharged (because the lights were left on, etc.), have the charging system checked by your Hyundai dealer.
Page 176: If The Engine Overheats

If overheating happens again, call a Hyundai dealer for assistance. CAUTION: Serious loss of coolant indicates there is a leak in the cooling system and this should be checked as soon as possible by a Hyundai dealer.
Page 177: Tire Pressure Monitoring System (Tpms)

TIRE PRESSURE MONITORING SYS- TEM (TPMS) C320A02JM-AAT (If installed) C320A01JM ➀ Low Tire Pressure Telltale ➁ TPMS Malfunction Indicator Each tire, including the spare (if pro- vided), should be checked monthly when cold and inflated to the inflation pres- sure recommended by the vehicle manu- facturer on the vehicle placard or tire inflation pressure label.
Page 178
WHAT TO DO IN AN EMERGENCY Low tire pressure telltale When the tire pressure monitoring sys- tem warning telltale is illuminated, one or more of your tires is significantly under-inflated. Immediately reduce your speed, avoid hard cornering and anticipate increased stopping distances.
Page 179
TPMS malfunction indicator. Have the system checked by an autho- rized Hyundai dealer as soon as pos- sible to determine the cause of the problem. NOTE:…
Page 180
WHAT TO DO IN AN EMERGENCY Please note that a tire that is hot (from being driven) will have a higher pres- sure measurement than a tire that is cold (from sitting stationary for at least 3 hours and driven less than 1 mile (1.6 km) during that 3 hour period).
Page 181: Spare Tire

SPARE TIRE D040A02JM-AAT TEMPORARY SPARE TIRE The following instructions for the tem- porary spare tire should be observed: 1. Check inflation pressure as soon as practical after installing the spare tire, and adjust to the specified pres- sure. The tire pressure should be periodically checked and maintained at the specified pressure while the tire is stored.
Page 182: If You Have A Flat Tire

WHAT TO DO IN AN EMERGENCY D040B02JM-GAT Handling the Spare Tire HJM2168-1 To remove the spare tire 1. Open the tail gate. 2. Remove the luggage mat. 3. Remove the luggage under tray. HJM4008 4. Turn the installation bolt counter- clockwise with a wheel nut wrench to remove the spare tire.
Page 183: Changing A Flat Tire

If you nevertheless decide to equip your vehicle with any tire/wheel com- bination not recommended by Hyundai for off-road driving, you should not use these tires for high- way driving. WHAT TO DO IN AN EMERGENCY D060B01JM-AAT 1.
Page 184
WHAT TO DO IN AN EMERGENCY D060C02A-AAT 2. Block the Wheel Flat tire HJM4009 Block the wheel that is diagonally oppo- site from the flat to keep the vehicle from rolling when the vehicle is raised on the jack. D060D01A-AAT 3.
Page 185
D060F03E-AAT 5. Raising the vehicle Wrench bar Wheel nut wrench HFC4022 After inserting the wrench bar into the wheel nut wrench, install the wrench bar into the jack as shown in the drawing. To raise the vehicle, turn the wheel nut wrench clockwise.
Page 186
WHAT TO DO IN AN EMERGENCY D060G02JM WARNING: If the vehicle has been driven re- cently, some pieces may be very hot. Use caution. WARNING: Wheels and wheel covers may have sharp edges. Handle them carefully to avoid possible severe injury. Be- fore putting the wheel into place, be sure that there is nothing on the hub or wheel (such as mud, tar, gravel,…
Page 187
D060I01E-AAT 8. Lower Vehicle and Tighten Nuts HJM4016 Lower the car to the ground by turning the wheel nut wrench counterclock- wise. Then position the wrench as shown in the drawing and tighten the wheel nuts. Be sure the socket is seated completely over the nut.
Page 188
TOWED D080A01O-GAT If your vehicle has to be towed, it should be done by your Hyundai dealer or a commercial tow truck service. This will help assure that your vehicle is not damaged in towing. Also, profes- sionals are generally aware of local laws gov- erning towing.
Page 189
CAUTION: o When towing the vehicle, take care not to cause damage to the bumper or under- body of the vehicle. D080A01JM o Do not tow with sling type truck as this may cause damage to the bumper or underbody of the vehicle. 1) If the vehicle is being towed with the rear wheels on the ground, be sure the parking brake is released.
Page 190: Emergency Towing

WHAT TO DO IN AN EMERGENCY D080B02O-AAT Towing the 4 Wheel Drive Vehicle dolly dolly D080C04JM When towing the 4WD vehicle, it must be towed by lifting all 4 wheels or using the towing dolly. CAUTION: o The 4WD vehicle should never be towed with the wheels on the ground.
Page 191: If You Lose Your Keys

1 mile at ANY TIME. IF YOU LOSE YOUR KEYS D120A01A-AAT If you lose your keys, many Hyundai dealers can make you a new key if you have your key number. If you lock the keys inside your car and…
Page 192: Corrosion Prevention & Appearance Care

CORROSION PREVENTION & APPEARANCE CARE Corrosion Protection … 4-2 To Help Prevent Corrosion … 4-2 Washing and Waxing … 4-3 Cleaning the Interior … 4-5…
Page 193: Corrosion Protection

By using the most advanced design and con- struction practices to combat corrosion, Hyundai produces cars of the highest quality. However, this is only part of the job. To achieve the long-term corrosion resistance your Hyundai can deliver, the owner’s cooperation and assistance is also required.
Page 194: Washing And Waxing

Use a good quality car-washing solution and follow the manufacturer’s directions on the package. These are available at your Hyundai dealer or auto parts outlet. Don’t use strong household detergents, gasoline, strong solvents or abra- sive cleaning powders as these may damage the finish.
Page 195
To protect the paintwork of the car against corrosion, you must clean your Hyundai (at least once a month). Give special attention to the removal of salt, mud and other sub- stances on the underside of the splashboards of the car.
Page 196: Cleaning The Interior

Maintaining Bumpers Special precautions must be observed to pre- serve the appearance of the bumpers on your Hyundai. They are: o Be careful not to spill battery electrolyte or hydraulic brake fluid on the bumpers. If you do, wash it off immediately with clear water.
Page 197
However, when cleaning the in- side of the rear window be careful not to damage the rear window defroster wiring. ANY QUESTIONS? E050A01A-AAT If you have any questions about the care of your car, consult your Hyundai dealer.
Page 198: Vehicle Maintenance Requirements

F030C03JM-AAT R : Replace I : Inspect and, after inspection, clean, adjust, repair or replace if necessary MILES X 1000 DESCRIPTION KILOMETERS X 1000 MONTHS GENERAL ITEMS DRIVE BELT 2.0 DOHC (ALT, W/PUMP) 2.7 V6 (ALT, P/STR’G, A/CON) COOLANT TIMING BELT (WHEN REPLACE TIMING BELT AND INSPECT WATER PUMP : 2.7L) (See Note (2)- 2.0 L) MANUAL TRANSAXLE OIL…
Page 199: Do-It-Yourself Maintenance

DO-IT-YOURSELF MAINTENANCE Engine Compartment … 6-2 General Checks … 6-4 Checking the Engine Oil … 6-5 Changing the Oil and Filter … 6-6 Checking and Changing the Engine Coolant … 6-8 Changing the Air Cleaner Filter … 6-10 Checking the Transaxle Oil (Manual) … 6-11 Checking the Transaxle Fluid (Automatic) …
Page 200
DO-IT-YOURSELF MAINTENANCE ENGINE COMPARTMENT G010A01JM-GAT (2.7 Gasoline) 1. Power steering fluid reservoir 2. Brake & Clutch fluid reservoir 3. Air cleaner 4. Fuse and Relay box 5. Windshield washer fluid reservoir 6. Engine oil level dipstick 7. Coolant reservoir cap 8.
Page 201
G010B01JM-AAT (2.0 Gasoline) 1. Power steering fluid reservoir 2. Engine oil filler cap 3. Brake & Clutch fluid reservoir 4. Air cleaner 5. Fuse and Relay box 6. Windshield washer fluid reservoir 7. Engine oil level dipstick 8. Coolant reservoir cap DO-IT-YOURSELF MAINTENANCE CAUTION: When inspecting or servicing the…
Page 202: Engine Compartment

Seat control condition and operation o Seat belt condition and operation o Sunvisor operation If you notice anything that does not operate correctly or appears to be functioning correctly, inspect it carefully and seek assistance from your Hyundai dealer if service is needed.
Page 203: Checking The Engine Oil

CHECKING THE ENGINE OIL G030A01A-AAT Engine oil is essential to the performance and service of the engine. It is suggested that you check the oil level at least once a week in normal use and more often if you are on a trip or driving in severe conditions.
Page 204: Changing The Oil And Filter

DO-IT-YOURSELF MAINTENANCE G030D01JM-AAT Adding Oil DOHC G030D01JM If the oil level is close to or below the «L» mark, add oil until it reaches the «F» mark. To add oil: 1. Remove the oil filler cap by turning it counter- clockwise.
Page 205
2. Open the hood and remove the engine oil filler cap. 3. Slide underneath the car and loosen the drain plug by turning it counterclockwise with a wrench of the proper size. Be sure that a drain pan is in position to catch the oil as it drains out, then remove the drain plug.
Page 206: Checking And Changing The Engine Coolant

«L» mark, add engine coolant to bring it up between «L» and «F». If the level is low, inspect for coolant leaks and recheck the fluid level frequently. If the level drops again, visit your Hyundai dealer for an inspection and diagnosis of the reason.
Page 207
G050D02A-AAT To Change the Engine Coolant The engine coolant should be changed at those intervals specified in the vehicle maintenance schedule in Section 5. CAUTION: Engine coolant can damage the finish of your car. If you spill engine coolant on the car, wash it off thoroughly with clean water.
Page 208: Changing The Air Cleaner Filter

If the wipers continue to streak or smear the glass, replace them with genuine Hyundai re- placement parts or their equivalent. CAUTION: o Do not operate the wipers on dry glass.
Page 209: Checking The Transaxle Oil (Manual)

Transaxle lubricant in the manual transaxle should be checked at those intervals specified in the vehicle maintenance schedule in Section Recommended Oil Use only HYUNDAI GENUINE PARTS MTF 75W/85 (API GL-4) or EQUIVALENT in the manual transaxle. Manual Transaxle Oil Capacity The oil capacity of the manual transaxle is 2.2…
Page 210: Checking The Transaxle Fluid (Automatic)

DO-IT-YOURSELF MAINTENANCE WARNING: It is always better to check the transaxle oil level when the engine is cool or cold. If the engine is hot, you should exercise great caution to avoid burning yourself on hot engine or exhaust parts. G100B02A-AAT To Check the Manual Transaxle Fluid Level…
Page 211
DIAMOND ATF SP III, SK ATF SP III or other brands meeting the SP III specification ap- proved by Hyundai Motor Co.. If you are having your vehicle serviced at a facility other than a Hyundai dealer, verify that the correct ATF is used for your vehicle.
Page 212: Checking The Brakes

Because brakes are essential to the safe operation of the car, it is suggested that they be checked and inspected by your Hyundai dealer. The brakes should be checked and inspected for wear at those intervals specified in the vehicle mainte-…
Page 213
G120B01A-AAT Checking the Brake Fluid Level WARNING: Use caution when handling brake fluid. It can damage your vision if it gets into your eyes. It will also damage your vehicle’s paint if spilled on it and not removed imme- diately. G120C02A-AAT Recommended Brake Fluid Use only hydraulic brake fluid conforming to…
Page 214: Checking The Clutch Fluid

Fill as required. Fluid loss indicates a leak in the clutch system which should be inspected and repaired imme- diately. Consult your Hyundai dealer. G130B02A-AAT To Replace the Fluid Recommended brake fluid conforming to DOT 3 or DOT 4 specification should be used.
Page 215: Changing The Climate Control Air Filter

Pressing with your finger, you should not be able to deflect this belt anymore than 1/3 of an inch. If the belt is too loose, have it adjusted by your Hyundai dealer. DO-IT-YOURSELF MAINTENANCE CHANGING THE CLIMATE CON-…
Page 216
DO-IT-YOURSELF MAINTENANCE HJM2136 2. Lower the glove box down completely by pushing the both sides of the glove box inward. HJM2134 3. Remove the climate control air filter cover by pressing both side’s clips. HJM2135 4. Remove the climate control air filter by lifting 5.
Page 217: Checking The Free-Play

Use very light finger pressure and be sensitive to changes in resistance that mark the limits of the free-play. If the free-play is greater than specified, have it inspected by your Hyundai dealer and adjusted or repaired if necessary. DO-IT-YOURSELF MAINTENANCE…
Page 218: Checking Drive Belts

This is the brake pedal free-play. The free-play should be within the limits speci- fied in the illustration above. If it is not, have it inspected by your Hyundai dealer and adjusted or repaired if necessary. CHECKING BRAKE PEDAL…
Page 219: Checking And Replacing Fuses

If this ever happens, have a Hyundai dealer determine the cause, repair the system and replace the fusible link. The fusible links are located in a relay box in the engine compartement for easy inspection.
Page 220
The fuse should be a snug fit. If it is not, have the fuse clip repaired or replaced by a Hyundai dealer. If you do not have a spare fuse, you may be…
Page 221: Checking The Battery

CHECKING THE BATTERY G210A01A-AAT HJM5008 WARNING: Batteries can be dangerous! When working with batteries, carefully observe the follow- ing precautions to avoid serious injuries. The fluid in the battery contains a strong solution of sulfuric acid, which is poisonous and highly corrosive.
Page 222: Power Steering Fluid Level

DO-IT-YOURSELF MAINTENANCE CHECKING ELECTRIC COOLING FANS G220A01A-AAT WARNING: The cooling fan is controlled by engine coolant temperature and may sometimes operate even when the engine is not run- ning. Use extreme caution when working near the blades of the cooling fan, so that you are not injured by a rotating fan blade.
Page 223
YOUR HYUNDAI If you desire additional information about main- taining and servicing your Hyundai, you may purchase a factory Shop Manual at your Hyundai dealer’s parts department. This is the same manual used by dealership technicians and while it is highly technical it can be useful in obtaining a better understanding of your car and how it works.
Page 224
DO-IT-YOURSELF MAINTENANCE WARNING: Never attempt to adjust the horizontal align- ment of your headlights. Horizontal aiming must be adjusted by an authorized Hyundai dealer to avoid incorrect alignment that will reduce the effectiveness of your headlights. G290B01JM-AAT Adjustment After Headlight Assembly…
Page 225: Replacement Of Light Bulbs

If the water leaks into the lamp bulb circuitry, have the vehicle checked by an Authorized Hyundai Dealer. G270A02O-AAT Headlight and Front Turn Signal Light 1. Allow the bulb to cool. Wear eye protection.
Page 226
DO-IT-YOURSELF MAINTENANCE HJM5016 6. Turn the plastic cover counterclockwise and remove it. HJM5017 7. Disconnect the connector from the bulb base in the back of the headlight. HJM5018 8. Push the bulb spring to remove the headlight bulb. 9. Remove the protective cap from the re- placement bulb and install the new bulb by matching the plastic base with the headlight hole.
Page 227
G270A03O WARNING: This halogen bulb contains gas under pres- sure and if impacted could shatter, result- ing in flying fragments. Always wear eye protection when servicing the bulb. Protect the bulb against abrasions or scratches and against liquids when lighted. Turn the bulb on only when installing in a headlight.
Page 228
DO-IT-YOURSELF MAINTENANCE G270I02JM-GAT Front fog Light (If installed) HJM5047 1. Remove the cover with a phillips screw driver. 2. Remove the bolts with a wrench. HJM5048 HJM5049 3. Disconnect the power cord. HJM5050 4. Replace to the new bulb. G270C02TB-GAT Luggage Compartment Light (If Installed) G270C01JM…
Page 229
G270C02JM 2. Disconnect the power cord. HTB284 3. Replace to the new bulb. G270C02JM-AAT Cargo Light HJM5023 1. Open the tail gate. 2. Remove the cover with a flat blade screw- driver. DO-IT-YOURSELF MAINTENANCE HJM5024 3. Replace with a new bulb.
Page 230
DO-IT-YOURSELF MAINTENANCE G270E01O-AAT Front Side Marker Light G270E01JM 1. Remove the cover with a phillips screw- driver. G270E02HR 2. Disconnect the connector. G270E03HR 3. Replace with a new bulb. G270G01O-AAT Interior Light HJM5025 1. Remove the cover with a flat blade screw- driver.
Page 231
HJM5026 2. Replace with a new bulb. G270H01O-AAT Glove Box Illuminated Light (If installed) HJM5045 1. Open the glove box. 2. Remove the cover with a flat blade screw- driver. DO-IT-YOURSELF MAINTENANCE HJM5039 3. Disconnect the connector. 4. Replace with a new bulb. HTB284…
Page 232: Bulb Wattage

DO-IT-YOURSELF MAINTENANCE BULB WATTAGE G280A02JM-AAT Part Name Front Postion Light Glove Box Illuminated Light Head Light (Low/High) Map Light Interior Light Room Light Front Fog Light (If installed) Turn Signal Light Side Marker Front Door Edge Warning Light (If installed) Wattage Socket type Part Name…
Page 233: Fuse Panel Description

FUSE PANEL DESCRIPTION G200C01JM-GAT Engine Compartment G200C01JM NOTE: Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label. FUSE DESCRIPTION RATING…
Page 234
DO-IT-YOURSELF MAINTENANCE G200E01JM-AAT Inner Panel G200E02JM…
Page 235
FUSE FUSE RATING P/WDW-LH Left power window P/WDW-RH Right power window TAIL RH Right rear combination lamp, Glove box lllumination RR HTR Rear defogger A/BAG SRS control CLUSTER Instrument cluster, ETACM/TACM TAIL LH Left head lamp, Left rear combination lamp, License lamp AUDIO Digital clock, Audio, Power outside mirror folding module, Power outside mirror &…
Page 236
DO-IT-YOURSELF MAINTENANCE FUSE FUSE RATING IG-SW Ignition switch ROOM LP Room lamp, A/C control module, Digital clock, ETACM/TACM Key remind switch Audio T/SIG Hazard switch, Auto light & Photo sensor, Transaxle range switch A/BAG IND Instrument cluster RR WIPER Safety relay A/CON Sunroof controller, A/C control module, Blower relay, ETACM/TACM PTC heater relay, Fuel filter heater relay, DRL CONTROL MODULE, head LAMP RELAY…
Page 237: Emission Control Systems

EMISSION CONTROL SYSTEMS Emission Control System … 7-2 Catalytic Converter … 7-3…
Page 238
In order to assure the proper function of the emission control systems, it is recommended that you have your car inspected and main- tained by an authorized Hyundai dealer in ac- cordance with the maintenance schedule in this manual. Caution for the Inspection and Maintenance…
Page 239
WARNING: o Remember that your Hyundai dealer is your best source of assistance. o Do not stop your Hyundai over any com- bustible material such as grass, paper, leaves or rags. These materials might contact the hot catalytic converter and a…
Page 240: Consumer Information, Reporting Safety Defects

When to Replace Tires … 8-12 Tire Maintenance … 8-13 Spare Tire and Tools … 8-14 Warranties for Your Hyundai Vehicle … 8-14 Consumer Information … 8-15 Reporting Safety Defects … 8-17 Binding Arbitration of Warranty Claims (U.S.A Only) .. 8-17…
Page 241: Vehicle Identification Number (Vin)

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS VEHICLE IDENTIFICATION NUMBER (VIN) I010A02JM-AAT I010A03JM I010A02JM The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc. It can be found in three different places on your car: 1.
Page 242: Tire Information

TIRES I020A02A-AAT TIRE INFORMATION The tires supplied on your new Hyundai are chosen to provide the best perfor- mance for normal driving. If you ever have questions about your tire warranty and where to obtain ser- vice, see the tire manufacture’s booklet included with your vehicle’s Owner’s Manual Literature Kit.
Page 243
Replace tires that are worn, show uneven wear, or are damaged. See page 8-12. o Remember to check the pressure of your spare tire. Hyundai recom- mends that you check the spare every time you check the pressure of the other tires on your vehicle.
Page 244
CAUTION: Always observe the following: o Check pressures when the tires are cold. (After the vehicle has been parked for at least three hours or hasn’t been driven more than one mile (1.6 km) since starting up.) o Check the pressure of your spare tire each time you check the pres- sure of other tires.
Page 245: Tire Sidewall Labeling

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS I030B01JM-AAT TIRE SIDEWALL LABELING 5, 6 I030B04JM Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamen- tal characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification.
Page 246: Tire Terminology And Definitions

o Four numbers represent the week and year the tire was built. For example, the numbers 3105 means the 31st week of 2005. 4. Tire ply composition and material The number of layers or plies of rubbercoated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which in- clude steel, nylon, polyester, and…
Page 247
CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS Cold Tire Pressure: The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat from driving.
Page 248
I040B01JM-AAT ALL SEASON TIRES Hyundai specifies all season tires on some models to provide good perfor- mance for use all year round, including snowy and icy road conditions. All sea- son tires are identified by ALL SEASON and/or M+S (Mud and Snow) on the tire sidewall.
Page 249: Snow Tires

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS I040A01O-AAT SNOW TIRES If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels;…
Page 250: Tire Rotation

(12,000 km). If you notice that tires are wearing unevenly between ro- tations, have the car checked by a Hyundai dealer so the cause may be corrected. After rotating, adjust the tire pressures and be sure to check wheel nut torque.
Page 251: When To Replace Tires

Wheels that do not meet Hyundai’s specifications may fit poorly and result in damage to the vehicle or unusual handling and poor ve-…
Page 252: Tire Maintenance

If you nevertheless decide to equip your vehicle with any tire/wheel com- bination not recommended by Hyundai for off-road driving, you should not use these tires for high- way driving. I090B02JM-AAT TIRE MAINTENANCE…
Page 253: Spare Tire And Tools

Spare tire and wheel Wheel nut wrench, Wrench bar Jack I110A01A-AAT SHOP MANUAL A Hyundai Shop Manual is available from your authorized Hyundai dealer. It’s written for pro- fessional technicians, but is simple enough for most mechanically-inclined owners to under- stand.
Page 254: Consumer Information

Hyundai automobiles with infor- mation on uniform tire quality grading. Your Hyundai dealer will help answer any questions you may have as you read this information. CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS…
Page 255
For example : Treadwear 200 Traction AA Tempera- ture A I130D04A-AAT Hyundai motor vehicles are designed and manu- factured to meet or exceed all applicable safety standards. For your safety, however, we strongly urge you to read and follow all directions in this Owner’s Manual, particularly the information under the headings «NOTE», «CAUTION»…
Page 256: Reporting Safety Defects

You will not be responsible for paying filing and hearing fees above $275.00. All other arbitration costs shall be borne by Hyundai Motor America. You are not responsible to pay any of the costs Hyundai incurs.
Page 257
You may revoke this Arbitration Agree- ment by (1) written notice or (2) elec- tronic notice. Written notice must be delivered (via certified mail) to Hyundai Motor America, Attn: Consumer Af- fairs, 10550 Talbert Avenue, P.O. Box 20849, Fountain Valley, CA 92728-0849.
Page 258: Vehicle Specifications

VEHICLE SPECIFICATIONS Measurement … 9-2 Engine … 9-3 Lubrication Chart … 9-4…
Page 259
VEHICLE SPECIFICATIONS J010A01JM-AAT MEASUREMENT Overall Length Overall Width Overall Height (Unladen) Wheel base Front Wheel tread Rear J020A01JM-AAT POWER STEERING Type Rack and pinion Wheel free play 0 ~ 1.18 in. (0 ~ 30 mm) Rack stroke 5.5 in. (142 mm) Oil pump type Vane type J060A01JM-AAT…
Page 260
ENGINE J070A02JM-AAT ITEMS Engine Type Bore x Stroke Displacement (cc) Firing order Intake For adjusting Valve Clearance Exhaust (Cold engine : 20±5°C) Intake For checking Exhaust Idle speed (rpm) Ignition timing GASOLINE 2.0 DOHC 4-Cyl., In-line DOHC 82 × 93.5 1,975 1-3-4-2 0.0067 ~ 0.0091 in.(0.17 ~ 0.23 mm)
Page 261
Transaxle Manual HYUNDAI GENUINE PARTS SAE MTF SAE 75W/85 (API GL-4) HYUNDAI GENUINE ATF SP III, DIAMOND ATF SP III, SK ATF SP III or other Automatic brands meeting the SP III specification approved by Hyundai Motor Co.. Transfer case…
Page 262: Index

INDEX…
Page 263
Parking light auto off … 1-59 Turn signal operation … 1-58 Consumer Information … 8-15 Cooling Fans … 6-24 Corrosion protection Cleaning the interior … 4-5 Protecting your Hyundai from corrosion … 4-2 Washing and waxing … 4-3 Cruise Control … 1-87…
Page 264
Defrosting / Defogging … 1-100 Door Central door lock … 1-7 Door locks … 1-4 Front door edge warning light … 1-86 Drink Holder … 1-67 Drive Belts … 6-20 Driving Driving for economy … 2-22 Smooth cornering … 2-23 Winter driving …
Page 265
INDEX Defrosting / Defogging … 1-98 Fan speed control (Blower control) … 1-93 Temperature control … 1-97 High-Mounted Rear Stop Light … 1-82 Hood Release … 1-84 Horn … 1-87 How to Use Luggage Room … 1-79 Ignition Switch … 2-5 Instrument Cluster and Indicator Lights …
Page 266
Seat Front … 1-12 Rear … 1-16 Seat warmer … 1-15 Seat Belts 3-point system … 1-21 Pretensioner seat belt … 1-31 Adjusting your seat belt … 1-22 Care of seat belts … 1-19 Precautions … 1-18 Shop Manual … 8-14 Shopping Bag Holders …
Page 267
INDEX Vehicle Identification Number … 8-2 Vechcle Load Limit … 2-29 Vehicle Specifications Engine … 9-3 Lubrication chart … 9-4 ~ 9-5 Measurement … 9-2 Warning and Indicator Lights … 1-48 Windows Power … 1-11 Windshield Wiper and Washer … 1-60 Rear Window wiper and washer switch …
Page 268
A000A01A-AAT This Owner’s Manual should be considered a part of the car and remain with it when it is sold for the use of the next owner. ORIGINAL OWNER ADDRESS CITY DELIVERY DATE DEALER NAME ADDRESS CITY OWNER’S I.D. STATE ZIP CODE (Date Sold to Original Retail purchaser) DEALER NO.
Page 269
“N” (Neutral) position. Then check the level of fluid on the dipstick. Use only HYUNDAI GENUINE ATF SP III, DIAMOND ATF SP III, SK ATF SP III or other brands meeting the SP III specification approved by Hyundai Motor Co..

Источник

Автосервис АвтоМиг в Коптево

Автосервис АвтоМиг в Лефортово

Автосервис АвтоМиг в Щукино

Автосервис АвтоМиг в Измайлово

Автосервис АвтоМиг в Гольяново

AUTO-TEXCENTER.RU

Page 3: Specifications

Page 9: Table Of Contents

Page 10: Instruments And Controls

Page 13: Features Of Your Hyundai

Page 14: Fuel Recommendations

Page 15: Breaking In Your New Hyundai

Page 16: Door

Page 23: Power Windows

Page 24: Seats

Page 30: Seat Belts

Page 37: Child Restraint System

Page 45: Supplemental Restraint (Airbag) System

Page 58: Instrument Cluster And Indicator Lights

Page 60: Warning And Indicator Lights

Page 70: Multi-Function Light Switch

Page 72: Windshield Wiper/Washer Switch

Page 80: Sunroof

Page 87: Mirror

Page 91: How To Use Luggage Room

Page 96: Hood Release

Page 99: Cruise Control

Page 104: Heating And Cooling Control

Page 121: Stereo Sound System

Page 123: Audio System

Page 138: Antenna

Page 139: Driving Your Hyundai

Page 140: Engine Exhaust Can Be Dangerous

Page 142: Before Starting The Engine

Page 143: Key Positions

Page 144: Starting

Page 145: Manual Transaxle

Page 147: Automatic Transaxle

Page 151: Anti-Lock Brake System (Abs)

Page 153: Electronic Stability Control (Esc)

Page 154: Full-Time 4Wd Operation

Page 157: 4Wd Lock System

Page 159: Good Braking Practices

Page 160: Driving For Economy

Page 161: Winter Driving

Page 164: Trailer Or Vehicle Towing

Page 167: Vehicle Load Limit

Page 174: What To Do In An Emergency

Page 175: Jump Starting

Page 176: If The Engine Overheats

Page 177: Tire Pressure Monitoring System (Tpms)

Page 181: Spare Tire

Page 182: If You Have A Flat Tire

Page 183: Changing A Flat Tire

Page 190: Emergency Towing

Page 191: If You Lose Your Keys

Page 192: Corrosion Prevention & Appearance Care

Page 193: Corrosion Protection

Page 194: Washing And Waxing

Page 196: Cleaning The Interior

Page 198: Vehicle Maintenance Requirements

Page 199: Do-It-Yourself Maintenance

Page 202: Engine Compartment

Page 203: Checking The Engine Oil

Page 204: Changing The Oil And Filter

Page 206: Checking And Changing The Engine Coolant

Page 208: Changing The Air Cleaner Filter

Page 209: Checking The Transaxle Oil (Manual)

Page 210: Checking The Transaxle Fluid (Automatic)

Page 212: Checking The Brakes

Page 214: Checking The Clutch Fluid

Page 215: Changing The Climate Control Air Filter

Page 217: Checking The Free-Play

Page 218: Checking Drive Belts

Page 219: Checking And Replacing Fuses

Page 221: Checking The Battery

Page 222: Power Steering Fluid Level

Page 225: Replacement Of Light Bulbs

Page 232: Bulb Wattage

Page 233: Fuse Panel Description