Бензопила ryobi pcn 4040 инструкция

[Page 1] Ryobi PCN 4040

PCN 4040_4545 manual 7/01/04 9:46 Page A1 N197 ® PCN 4040 CHAINSAW OWNER’S OPERATION MANUAL
…

[Page 2] Ryobi PCN 4040

…

[Page 3] Ryobi PCN 4040

S T O P                                                       �…

[Page 4] Ryobi PCN 4040

                                         …

[Page 5] Ryobi PCN 4040

                                               …

[Page 6] Ryobi PCN 4040

                                                         �…

[Page 7] Ryobi PCN 4040

Sous réserve de modifications techniques / Subject to technical modifications / Technische Änderungen vorbehalten / Bajo reserva de modificaciones técnicas / Con riserva di eventuali modifiche tecniche / Com reserva de modificações técnicas / …

[Page 8] Ryobi PCN 4040

Thank you for buying a Ryobi chainsaw. Your new chainsaw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble…

[Page 9] Ryobi PCN 4040

GENERAL SAFETY RULES ■ DO NOT OPERATE A CHAINSAW WITH ONE HAND. Serious injury to the operator, helpers, and/or bystanders may result from one-handed operation. A chainsaw is intended for two-handed use. ■ DO NOT OPERATE A CHAINSAW WHEN…

[Page 10] Ryobi PCN 4040

SPECIFIC SAFETY RULES PROPER CLOTHING FOR SAFETY ■ Wear close-fitting clothing. Always wear heavy, long trousers, boots, and gloves. Do not wear jewellery, shorts, sandals, or go barefoot. Do not wear loose- fitting clothing, wh…

[Page 11] Ryobi PCN 4040

4 Sound pressure level (ISO 7182) LpA av = 103.9 dBA Sound power level (ISO 9207) LwA av = 110 dBA Vibra tion (ISO 7505): — Front Handle 3.5 m/s 2 — Rear Handle 7…

[Page 12] Ryobi PCN 4040

OPERATION WARNING KICK-BACK occurs when the moving chain contacts an object at the upper portion of the tip of the guide bar or when the wood closes in and pinches the saw chain in the cut. Contact at the upper portion of the tip of the g…

[Page 13] Ryobi PCN 4040

6
…

[Page 14] Ryobi PCN 4040

OPERATION PREPARING FOR CUTTING PROPER CLOTHING FOR SAFETY (Fig. 16) ■ Wear loose-fitting clothing (A). Always wear heavy, long trousers (B), boots (C), and gloves (D). Do not wear jewellery, shorts, sandals, or go barefoot. Do not we…

[Page 15] Ryobi PCN 4040

OPERATION WORK AREA PRECAUTIONS (Fig. 21) ■ Cut only wood or materials made from wood; no sheet metal, no plastics, no masonry, no non-wood building materials. ■ Never allow children to operate your saw. Allow no person to …

[Page 16] Ryobi PCN 4040

OPERATION ■ Do not cut trees near electrical wires or buildings (D). ■ Consider the direction in which the tree leans (E). ■ Check the tree for damaged or dead branches which could fall and hit you during felling (F). ■ Periodically glance …

[Page 17] Ryobi PCN 4040

OPERATION BUCKING WITH A WEDGE (Fig. 34) If the wood diameter is large enough for you to insert a soft bucking wedge (B) without touching the chain, you should use the wedge to hold the cut open to prevent pinching. NOTE: When bucking or felling …

[Page 18] Ryobi PCN 4040

MAINTENANCE 4. Remove the bar mounting nuts (B) using a combination wrench (C) or a 5/8 in. spanner. 5. Remove the clutch cover (D), and the outer guide bar plate (E). 6. Lay out the saw chain in a loop and straighten any kinks. The cutters…

[Page 19] Ryobi PCN 4040

MAINTENANCE SHARPENING THE CUTTERS (Fig. 53 — 56) PARTS OF A CUTTER (A) Cutting Corner (E) Gullet (B) Side Plate (F) Heel (C) Depth Gauge (G) Rivet hole (D) Toe (H) Top Plate Be careful to file all cutters to the specified angles and to the same le…

[Page 20] Ryobi PCN 4040

MAINTENANCE In addition, lubricate guide bars (with a sprocket at their tip) weekly. Using a grease syringe, lubricate weekly in the lubricating hole. Turn the guide bar and check that the lubrication holes (A) and chain groove are …

[Page 21] Ryobi PCN 4040

MAINTENANCE WARNING Never run the saw without all the parts, including the drivecase cover and starter housing, securely in place. Because parts can fracture and pose a danger of thrown objects, leave repairs of the flywheel and clutch to …

[Page 22] Ryobi PCN 4040

TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Engine will not start. 1. No spark. 1. Check spark. Remove air filter cover. (Make sure ignition switch Remove sparking plug from cylinder. is in start position “I”). Reattach the sparking plug wi…

[Page 23] Ryobi PCN 4040

TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Engine starts and runs, 1. Chain oil tank empty. 1. Oil tank should be filled every time but chain is not rotating. that fuel tank is filled. 2. Check chain tension for 2. Tension chain per instructio…

[Page 24] Ryobi PCN 4040

Machine: 40 CC CHAINSAW Type: PCN 4040 Name of company: Ryobi Technologies (UK) Limited. Address: ANVIL HOUSE, TUNS LANE, HENLEY-ON-THAMES, OXFORDSHIRE, RG9 1SA UNITED KINGDOM Tel: +44-1491-8487…