Слайсер bizerba a404 инструкция на русском

Short answer: To change the speed on a Bizerba 404 slicer, locate the speed control dial or knob on the machine, usually found on the front panel or side. Turn this dial to adjust the slicing speed to your desired level.

The Bizerba 404 slicer is a versatile machine that allows you to slice meat, cheese, and other food items quickly and efficiently. One of the key features of this slicer is its ability to adjust the speed of the blade to suit different types of food. Changing the speed of your Bizerba 404 slicer is a simple process that can be done in just a few steps.

How To Change Speed On Bizerba 404 Slicer?

To change the speed on your Bizerba 404 slicer, follow these steps:

Before engaging in any sharpening process, it’s crucial to ensure that the wheels are properly angled on the blade :

Step 1: Locate the screws on the back of the slicer responsible for adjusting the wheel alignment.

Step 2: Carefully adjust these screws to achieve the correct angle, ensuring the wheels will make optimal contact with the blade.

Step 3: To maintain a reference point for future adjustments, mark the original position with a line.

Step 4: Verify that the wheels are touching the blade appropriately, ensuring a proper sharpening process.

Step 5: Install the sharpener onto the machine, securely attaching it according to the manufacturer’s instructions.

To change the speed on your Bizerba 404 slicer, adhere to the following instructions:

Ste p1: Locate the speed adjustment knob, typically positioned on the control panel or near the motor.

Step 2: Turn the speed adjustment knob to “Number 1” to initiate the sharpening process. Maintain this setting for a duration of 30 seconds.

Step 3: After 30 seconds, rotate the knob to “Number 2” for a period of 3 seconds. This setting optimizes the slicing speed.

Step 4: Avoid exceeding 30 seconds on “Number 2” to prevent potential damage to the blade.

Removing The Knife Sharpener:

Once the desired speed settings have been configured, it’s important to safely remove the knife sharpener. Follow these steps:

Step 1: Stop the machine’s operation by pressing the designated stop button or activating the designated function that brings the slicer back to position zero.

Step2: After returning the slicer to the starting position, ensure the machine is turned off.

Step 3: Carefully detach the knife sharpener from the machine, following the manufacturer’s instructions and any specific safety guidelines.

Safety Considerations When Changing The Speed On The Bizerba 404 Slicer

When changing the speed on the Bizerba 404 slicer, it’s crucial to prioritize safety to prevent accidents and ensure a secure working environment. Here are some key safety considerations to keep in mind:

• Familiarize Yourself with the Manual: Review the user manual provided by the manufacturer to understand the slicer’s specific safety guidelines and instructions for speed adjustments.
• Turn Off and Unplug: Before making any speed changes, ensure that the slicer is completely turned off and unplugged from the power source to avoid any potential electrical hazards.
• Handle with Care: When working with the slicer, exercise caution and handle it with care. Avoid direct contact with sharp blades or moving parts to prevent cuts or other injuries.
• Use Recommended Tools and Accessories: If the manufacturer recommends specific tools or accessories for making speed adjustments, ensure you use them to maintain safety and avoid any potential damage to the slicer or yourself.
• Protective Gear: Wear appropriate protective gear, such as cut-resistant gloves, when handling the slicer to provide an extra layer of safety against potential accidents.
• Dry Hands: Ensure that your hands are dry and free from moisture to prevent slipping or accidental activation of the slicer controls while making speed adjustments.
• Controlled Movements: Make speed adjustments with gentle and controlled movements, keeping your hands and fingers away from the blades and other moving parts.
• Double-Check Adjustments: After making speed changes, double-check that all adjustments are securely in place before turning on the slicer to avoid any unexpected movements or malfunctions.
• Seek Professional Assistance: If you have any concerns, difficulties, or doubts regarding the speed adjustments or the slicer’s safety, it is always recommended to seek professional assistance from a technician or contact the manufacturer directly.

By adhering to these safety considerations, you can ensure a secure and accident-free process when changing the speed on your Bizerba 404 slicer. Remember, safety should always be the top priority when operating any kitchen equipment.

FAQs

Why is it important to adjust the screws before installing the sharpener?

Adjusting the screws ensures that the wheels properly touch the blade, allowing for effective sharpening.

What is the purpose of marking the original position of the screws?

Marking the original position helps you understand how the screws were adjusted and facilitate reassembly after installing the sharpener.

Why should I avoid exceeding 30 seconds on “Number 2”?

Exceeding 30 seconds on “Number 2” can potentially damage the blade. It’s important to follow the recommended duration for optimal results and blade longevity.

How can I determine the appropriate speed for slicing different ingredients?

Experimentation and experience play a key role in determining the appropriate speed for slicing various ingredients. It’s recommended to start with a lower speed and gradually increase until the desired results are achieved. Additionally, referring to the manufacturer’s recommendations or consulting industry experts can provide valuable insights.

Mastering the speed control of your Bizerba 404 slicer is essential for achieving consistent and exceptional results. The proper installation of the sharpener, adjustment of the speed settings, and safe removal of the knife sharpener are all crucial steps in ensuring the slicer operates at its best.

• Adjust screws for proper wheel alignment before installing the sharpener.
• Mark the original position of the screws for reference during reassembly.
• Set the speed to “Number 1” for 30 seconds and “Number 2” for 3 seconds.
• Avoid exceeding 30 seconds on “Number 2” to prevent blade damage.

Войти или зарегистрироваться

1. Этот сайт использует файлы cookie. Продолжая пользоваться данным сайтом, Вы соглашаетесь на использование нами Ваших файлов cookie.

   Accept
   Узнать больше.

   Скрыть объявление

Download any manual ! 24 hours access to millions of manuals
Operating instructions, user manual, owner’s manual, installation manual, workshop manual, repair manual, service manual, illustrated parts list, electric schematics, electronic schematics….

Any manual costs 29.90 EUR in addition to non-refundable 9.90 EUR flat rate (mandatory research fees to create an order)

Home — Advanced search — How it works — All brands — All appliances — Special selection — Download (orders)

Terms of service — Contact ©  2004-2023 Assistance Network Inc.

Recent search for BIZERBA A404 :
BIZERBA A404
BIZERBA CD 8800
BIZERBA ITL
BIZERBAGLMI
BIZERBA SW100
BIZERBA FK22 SERVICE
BIZERBA ST 72336
BIZERBA SCALE
BIZERBA P9000
BIZERBA SCALE
BIZERBA BW 500 ANLEITUNG
BIZERBAV A560
BIZERBA BT OFB3P
BIZERBA GLP 2
BIZERBA VS 8 D

BIZERBA (63) BITRON VIDEO (45) BIOWATER (4) BINATONE (62) BILLION (2) BIFINETT (21) BIASI (1)