Rs ba1 инструкция на русском

  • Скачать себе

  • Оставить отзыв

  • Сообщить неисправную ссылку

Описание:

Программное обеспечение RS- BA1 позволяет использовать радиостанцию ICOM, установленную в другой комнате, используя домашнюю LAN-сеть или работать с удаленного места через сеть Интернет.

Программа поддерживает следующие модели трансиверов: Icom IC-7200, 7410, 7600, 9100, 7700, 756PROIII, 746PRO, 7400 , 7000, 7100
VOIP протокол связи имеет минимальную задержка голоса в IP-канале и обеспечивает такую же дистанционную работу в эфире, как если бы вы находились непосредственно перед трансивером.
Программное обеспечение поддерживает большинство функций трансивера, в том числе функции подавления помех, функции настройки фильтров ПЧ, отображение в реальном времени показания S- метр, показания уровней мощности и КСВ.
Приёмная часть программы имеет функцию записи голоса .

Скриншоты




Просмотров всего 2,246, сегодня 2


Похожее программное обеспечение

Название Категории Обновлено
RS-BA1 (For IC-7100) Программирование радиостанций 17.03.2017 15:05
CwType morse terminal CW 00.00.0000 00:00
MMSSTV 1.11F Новые виды радиосвязи >> SSTV 00.00.0000 00:00
Нет информации 01.01.2000 00:00
Condenser RESIstor CALculator — расчет резисторов и катушек Радиолюбительские расчеты >> Прочие расчеты 00.00.0000 00:00


Обсуждение этого ПО — Скажите свое мнение!

Оставьте свое мнение

Обсуждение этого ПО — Скажите свое мнение!

RS-BA1

Компания ICOM выпустила программу для удаленного управления трансивером по сети Ethernet

Программа состоит из двух компонентов: Программы конфигурирования оборудования и утилиты удаленного управления. Причем с помощью последней возможно управлять большинством настроек трансивера, включая прослушивание и запись речи.
Трансиверы подключаются следующим образом :
IC-7600, IC-7200 и IC-9100 :может быть подключен к компьютеру с помощью кабеля USB и кабеля AUDIO IN/OUT.

rsba1 chart

IC-7800 и IC-7700 : может быть подключен к ПК с помощью RS-232 + S/PDIF или ACC кабеля.

rsba1 chart 1

IC-756PRO111, IC-746PRO, IC-7400 и IC-7000 : может быть подключен к ПК с помощью аудио кабеля и RS-232

rsba1 chart

Разработчики гарантируют минимальную задержку при использовании данной программы.

Программное обеспечение RS- BA1 ver.2 позволяет использовать радиостанцию ICOM, установленную в другой комнате, используя домашнюю LAN-сеть или работать с удаленного места через сеть Интернет.

Программа поддерживает следующие модели трансиверов Icom: IC-7851, IC-7850, IC-7800, IC-7700, IC-7610, IC-7600, IC-7410, IC-9100, IC-7300, IC-7200, IC-7100, IC-9700, IC-705

VOIP протокол связи имеет минимальную задержку голоса в IP-канале и обеспечивает такую же дистанционную работу в эфире, как если бы вы находились непосредственно перед трансивером.

Программное обеспечение поддерживает большинство функций трансивера, в том числе функции подавления помех, функции настройки фильтров ПЧ, отображение в реальном времени показания S- метра, показания уровней мощности и КСВ.

Приёмная часть программы имеет функцию записи голоса .

Таблица совместимости функций ICOM RS-BA1 v.2

  IC-7851
IC-7850
IC-7800
IC-7700
IC-7610 IC-7600 IC-7410
IC-9100
IC-7300 IC-7200 IC-7100 IC-9700 IC-705
Функция Dualwatch                
Функция сервера          
Дистанционное включение / выключение питания    
Спектроанализатор (водопад)          
Режим прокрутки              
Регулировка APF AF            
CW Keyer  
Запись / воспроизведение голоса
USB-функционал с опциональным RC-28

ВНИМАНИЕ!!!

Пожалуйста, используйте последнюю версию прошивки трансивера!

Descriptions

Dualwatch, Dual Spectrum Scope Control

The dualwatch operation and dual spectrum scopes with the waterfall functions* can be used on your remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 at the same time. Of course, the RS-BA1 can be used with Icom single receiver transceivers.

* The dualwatch and dual spectrum scope functions are only for the IC-7851, IC-7850 and IC-7610. The spectrum scope functions (single receive) are usable with the IC-7300, IC-9700, IC-705 and IC-905. 

Most Functions Can Be Controlled

Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using the CI-V commands. The following functions are added to the RS-BA1 Version 2.

  • Panel size can be enlarged (Normal or large size selectable)
  • Indicator click operation to change the settings
  • RIT and ⊿TX functions
  • [MUTE] button
  • SUB dial

Low Latency, High Quality Audio Over an IP Network

The RS-BA1 offers real-time operation with low latency, high quality audio. You can use the transceiver installed in another room using your home network, or even from a remote location over the Internet*.

* A static public IP address or Dynamic DNS is required for the base station (Server) PC, when you configure the remote control system through the Internet.
 

Functions Compatibility Chart

IC-7851
IC-7850
IC-7800
IC-7700
IC-7610 IC-7600 IC-7410
IC-9100
IC-7300 IC-7200 IC-7100 IC-9700 IC-705
IC-905
Dualwatch Function

Server Function

Remote Power ON/OFF

Spectrum Waterfall Scope

Scroll Mode

APF AF Level Adjustment

CW Keyer

Voice Recording/Playback

USB Dial with
Optional RC-28

✓ : Function available. — : Function Not available.
*Depending on your transceiver, some functions or modes cannot be used, or you need to update
the transceiver’s firmware.
Please use the latest firmware version of the transceiver.

Specifications

PC (Base station or Remote station)
* When only one transceiver and one PC are connected to the Server PC.

Operating System

Windows 11 (64 bit),
Windows 10 (32/64 bit)

CPU

1.8 GHz Processor or better
(Multi-core Processor required for Windows 11)

Memory

Windows 11 (64 bit): 4 GB or more
Windows 10 (32 bit): 2 GB or more
Windows 10 (64 bit): 4 GB or more

Hard disk space

150 MB or more of available disk space
*The Voice Memory or Recording function will require more space.

Network data speed
(When the default audio quality is used)
To use the Dualwatch function
(IC-7851/7850/7610)

For the Base station:
Upload: 1.2 Mbps Download: 350 kbps, or faster

For the Remote station :
Upload: 350 kbps Download: 1.2 Mbps, or faster

Other models
(Other than the
IC-7851/7850/7610)

For the Base station:
Upload: 500 kbps Download: 350 kbps, or faster

For the Remote station :
Upload: 350 kbps Download: 500 kbps, or faster

Display Resolution

1024 × 768 pixels (enlargeable)

Other

Speaker and microphone or headset (purchase separately)
On-board sound chipset recommended

This is the minimum system requirement to use the RS-BA1 Version 2.
Because the system requirements may differ, depending on your PC environment (permanently running software such as antivirus software, peripheral devices, network condition, settings of OS and other software), the operation is not guaranteed.

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • USB flash drive (#22) or CD (#12) (including RS-BA1 installer, instruction manual, USB driver and USB driver installation guide)
  • USB cable (A-B type)
  • Installation guides

Note for original version RS-BA1 users: Free upgrade service from RS-BA1 to RS-BA1 Version 2 is not available. To obtain the new features in the RS-BA1 Version 2, the purchase of a new software package is required.

Система дистанционного управления трансивером

Система дистанционного управления IP RC-28, позволяет радиолюбителям отдалённо приводить в действие трансиверы фирмы Icom. Программное обеспечение версии RS-BA1 Version 2, RC-28v.2 поставляется с шифратором USB дистанционного управления и будет работать с IC-7100, IC-7200, IC-7300, IC-7410, IC-7600 & IC-9100 через USB и с IC-7610, IC-7700, IC-7800, IC-7850 & IC-7851 через кабель локальных сетей.

Версия 2 RS-BA1 предлагает в реальном масштабе времени деятельность с низкой латентностью, аудио высокого качества. Вы можете использовать трансивер, установленный в другой комнате, используя вашу домашнюю сеть или даже удалённое расположение через Интернет.

RC-28 V.2

RC-28v.2 IP Remote Control SystemThe RC-28 IP Remote Control System, allows Radio Amateurs to remotely operate selected Icom amateur transceivers. Incorporating the RS-BA1 Version 2 software, the RC-28v.2 comes complete with remote control USB encoder and will work with the IC-7100, IC-7200, IC-7300, IC-7410, IC-7600 & IC-9100 via USB, and with the IC-7610, IC-7700, IC-7800, IC-7850 & IC-7851 via an ethernet cable.

Dualwatch, Dual Spectrum Scope Control
The dualwatch operation and dual spectrum scopes with the waterfall functions* can be used on your remote PC. MAIN and SUB spectrum scopes can be observed on the RS-BA1 Version 2 at the same time.
* The dualwatch and dual spectrum scope functions are only for the IC-7851, IC-7850 and IC-7610. The spectrum scope functions (single receive) are usable with the IC-7300.

Added Functions
Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using the CI-V commands. The following functions are added to the RS-BA1 Version 2.
• Panel size can be enlarged (Normal or large size selectable)
• Indicator click operation to change the settings
• RIT and ⊿TX functions
• [MUTE] button
• SUB dial

Low Latency, High Quality Audio Over an IP Network
The RS-BA1 Version 2 offers real-time operation with low latency, high quality audio. You can use the transceiver installed in another room using your home network, or even from a remote location over the Internet*.
* A static public IP address or Dynamic DNS is required for the base station (Server) PC, when you configure the remote control system through the Internet.

Functions Compatibility Chart

IC-7851
IC-7850
IC-7800
IC-7700
IC-7610 IC-7600 IC-7410
IC-9100
IC-7300 IC-7200 IC-7100
Dualwatch Function / x / x x x x x
Server Function / / / x x x x x
Remote Power ON/OFF / / / / x / x /
Spectrum Waterfall Scope / x / x x / x x
APF AF Level Adjustment / / / / x x x x
CW Keyer / / / / / / x /
Voice Recording/Playback / / / / / / / /
USB Dial with RC-28 / / / / / / / /

/ : Function Available
x : Function Not Available.
Note: Depending on your transceiver, some functions or modes cannot be used, or you need to update the transceiver’s firmware.
Please use the latest firmware version of the transceiver.

Supplied items
• CD (including the RS-BA1 instruction manual, the RS-BA1 installer, the USB driver and the USB driver installation guide)
• USB cable (A-B type)
• Installation guides

Note for RS-BA1 Version 1 users: To obtain the new features in the RS-BA1 Version 2, the purchase of the new software package is required.

Похожие записи:

Просмотрено:
1 234

Подробности

Программное обеспечение RS-BA1V2 работает под управлением операционных систем Windows XP (SP3 ), Vista, Windows 7, Windows 8 и состоит из двух отдельных программ. Программа удаленного управления (программа удалённый клиент). Программа-клиент устанавливается на удалённый компьютер. Программа непосредственного подключения к трансиверу – утилита удалённого управления (программа сервер). Программа сервер устанавливается на локальный компьютер, имеющий выход в интернет, к которому подключается трансивер.
Программа-сервер осуществляет управление трансивером и трансляцию команд и звука в сеть интернет. В ней устанавливаются IP адрес управления и частота дискретизации звука.

  1. Добавить отзыв

ПО МНОГОЧИСЛЕННЫМ ПРОСЬБАМ, ВЕТКА ОТЗЫВЫ ВОЗОБНОВЛЕНА

НАПИШИТЕ ВАШ ОТЗЫВ ОБ ЭТОМ ТОВАРЕ

Оставлять отзывы могут только зарегистрированные пользователи. Пожалуйста, войдите или зарегистрируйтесь

Понравилась статья? Поделить с друзьями:

Это тоже интересно:

  • Rvi smart pss инструкция на русском языке
  • Rubble master rm80 инструкция по эксплуатации
  • Rront таблетки для мужчин цена инструкция по применению
  • Rvi ipn4 1 4p инструкция
  • Rvan5 24a инструкция на русском

  • Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии