Roger technology h70 103ac инструкция

Информация, описание, технические характеристики изделия

Технические характеристики H70/103AC

Управление 1 электромотором ~230 В ±10%, 50 Гц, максимальной мощностью 2200 Вт
Температура эксплуатации – 25 ÷ +55°С
Выход сигнальной лампы – беспотенциальный контакт с максимальной нагрузкой ~230В, 1А
Выход лампы освещения – беспотенциальный контакт с максимальной нагрузкой ~230В, 2А
Выход лампы-индикатора открытого положения ворот =24В, 2Вт максимум
Выход электропитания аксессуаров =24В, 300мА максимум
2 уровня скорости в фазе замедления электромотора
8 уровней усилия в фазе старта электромотора
8 уровней усилия в основной фазе работы электромотора
8 уровней усилия в фазе замедления электромотора
Электронное торможение электромотора с 8 уровнями усилия торможения
99 уровней чувствительности обнаружения препятствий в основной фазе работы электромотора
99 уровней чувствительности обнаружения препятствий в фазе замедления электромотора
Программное конфигурирование блока управления в зависимости от варианта размещения
электромотора справа или слева от проема
Программное отключение не используемых Н.З. (нормально замкнутых) входов
Конфигурируемый таймерный вход
2 входа для подключения чувствительных бамперов (резистивных или релейных)
Программная привязка выхода 1го канала встраиваемого радиоприемника к различным входам
Программная привязка выхода 2го канала встраиваемого радиоприемника к различным входам
Беспотенциальный выход управления сигнальной лампой
Беспотенциальный выход управления лампой освещения
Контроль положения створки ворот посредством энкодера и концевых выключателей
Автоматическое запоминание и корректировка конечных точек хода створки
Возможность работы без концевых выключателей (только с энкодером)
5 алгоритмов работы входа пошагового управления
Возможность установки пароля для изменение настроек
Счетчик числа выполненных маневров
Счетчик времени работы электромотора
Запоминание времени ввода блока управления в эксплуатацию.
Отображение серийного номера блока управления и версии программного обеспечения

Отзывы по оборудованию и комментарии к материалу

Instruction Manual for Roger H70-103AC Gate Controllers

Click on the link below to download the instruction manual of Roger H70-103AC;

Roger H70-103AC is compatible with Remootio Wi-Fi & Bluetooth smart gate opener accessory.

With Remootio, you can:

• Use your smartphone to control your Roger H70-103AC gate opener via Bluetooth, Wi-Fi or over the Internet.

• Check if your gate is open or closed.
• Use Apple HomeKit, Amazon Alexa, Google Home or Samsung SmartThings to operate the gate.
• Check who opened or closed the gate.
• Use your Apple Watch and Siri Shortcuts to operate the gate.
• Send virtual keys to your family, friends, guests or your gardener and revoke their access rights anytime.
• Open the gate automatically as you arrive home (geofencing).
• Schedule when the gate should automatically open and close. 
• and much more!

You’ll need:

• A functional electric gate opener
• A Remootio unit
• A small screw driver
• A wiring diagram for easy installation
  (Enter the model number of your gate opener below and take a look at the wiring diagram)

The necessary wires and sensor parts are included in the kit.

There are four ways you can power your Remootio 3 unit:

1. Use the included USB charger to power the Remootio 3 device
2. Tap the power from the gate control board
3. Solar/battery powered operation
4. External 110V/230V to 5V power adapter

If you have multiple gates, you’ll need to install one Remootio unit for each gate opener and you’ll be able to control all of your Roger openers from the same app.

For more details, please check out the installation manual or feel free to contact the Remootio Support Team at support@remootio.com if you have any questions.

Remootio 3 feature summary:

Works with:

Please use the compatibility checker to make sure that Remootio 3 is compatible with your gate or garage door opener.

Connection methods:

 
Smart Home Integrations:

	Apple HomeKit
	Amazon Alexa
	Google Assistant
	Samsung SmartThings

Control via:

 
Features :

  
Easy installation:

Accessories:

If you have any questions, please feel free to contact us at support@remootio.com.

Control Unit:

• 

  IS36 Rev.02 21/07/2011 CENTRALE DI COMANDO — CONTROL UNIT H70/103AC ISTRUZIONI E AVVERTENZE PER L’INSTALLATORE INSTRUCTIONS AND RECOMENDATIONS FOR THE INSTALLER INSTRUCÇÕES E ADVERTÊNCIAS PARA A INSTALAÇÃO ISTRUCTIONS ET AVERTISSEMENT POUR L’INSTALLATEUR 1 H70/103AC
  …

  1

• 

  TECHNICAL DETAILS  1 motor 230V~ ±10% 50Hz, 2200W max  Working temperature from -10 to +55°C  Flashing light 1A max (tension free contact )  Courtesy 2A max (tension free contact)  Open gate led 24Vcc 2W max  Accessories current 300mA max on 24Vcc  2 levels of slow-down speed  8 levels of start up torque  8 levels of normal torque on travel  8 levels of force on slow-down  Electronic stop with 8 levels of stopping torq …

  2

• 

  PARAMETER CHANGE MODE If we select the parameter to be modified, pushing the button S3 we can modified the parameter. If the control unit is protected by password, the parameter could be only showed but not modified, we can modified the parameter if we enter the password (P1,P2,P3,P4). The parameter is showed on the first two numbers on the left of the display by fixed light, while the parameter value that we can modify is showed on two numbers on the right of the display by fl …

  3

• 

  Parameter Number Description of parameter function parameter value → Behaviour of the parameter Default Value INPUT Showing of input status (picture 5) LL Configuration level 0 → BASIC shows You only a part of the parameters (ones not marked by A) 1 → ADVANCED shows You all parameters 0 02 Automatic closing after pause time 0 → OFF not automatic closing 1-15 → numers of reclosing chance 99 → it always reclosing 0 03 Automatic closing afte …

  4

• 

  Roger H70/103AC | 35 A Torque level of the start up after an inversion due to safety edge or anticrushing 0 → start up not enable, the gate inverts with the torque settled during the normal travel 1-8 → LEVEL (1 = minimum… 8 = maximum) 8 36 A Start up times 1-20 → SECONDS of the start up torque 3 38 A Release thrust:: when it receives an input and the gate is completely closed, it makes a closing for a time settled and after it opens. It helps a releas …

  5

• 

  63 A Enables breaking before an inversion (AP–CH o CH–AP) 0 → NOT breaking before the inversion 1 → breaking before the inversion 1 64 A Breaking time 1-99 → breaking time on DECIMAL SECONDS 5 65 A Breaking force 1-8 → LEVEL (1 = minimum… 8 = maximum) 8 71 Motor position on the gate. Change the rotation of the motor for opening and closing and it changes automatically the limit swit …

  6

• 

  Roger H70/103AC | 79 Courtesy light time 0 → OFF 1 → IMPULSIVE, the output is on for a short time when it starts the movement 2 → the output is on during all movement time 3-90 → SECONDS after the end of the movement, in which the output is on and moreover it is on during all movement time 92-99 → from 92 the second number indicates the MINUTES after the end of the movement, in which the output is on and moreover it is on during all movement time (from 2 to 9 minutes) 2 …

  7

• 

  CONNECTIONS TABLE AP – COM normally open contact OPEN INPUT BUTTON CH – COM normally open contact CLOSE INPUT BUTTON PED – COM normally open contact PEDESTRIAN OPENING INPUT BUTTON ORO – COM normally open contact CLOCK INPUT ANT COM central pole of the cable shield ANTENNA We recommend the use of RG58 coaxial cable (50Ω) PP – COM normally open contact STEP BY STEP BUTTON ST – COM normally close contact STOP BUTTON COS1 – COM normally close contact SAFETY EDGE 1 CONNECTION ( …

  8

• 

  SELECTION BUTTON SCROLLING BUTTON DISPLAY INPUT 17 MOTOR OPEN COURTESY F N POWER 230Vac MOTOR COMMON FLASHING LIGHT MOTOR CLOSE CAPACITOR Encoder POWER Step by step Stop Release Radio receiver Photo1 Photo2 H70/103AC picture 4 S2 + S3 MECHANICAL RELEASE INPUT LIMIT SWITCH INPUT ENCODER INPUT COM — COMMON AP — OPEN CH — CLOSE PED — …

  9

Tips for Finding Manuals:

This web-page provides a list of 1 accessible operating manuals and information books describing Roger H70/103AC.
All manuals and instructions for Roger H70/103AC are introduced in an easy-to-use PDF format and may be gratuitously downloaded or looked through directly from the site.

The page offers the following types of manuals: Control Unit.

Helpful hints: While selecting a necessary guide for Roger H70/103AC one should pay special attention to the type of the document.
We try to supply you with the fullest possible set of papers we or our users are able to find. These may be overviews and specifications of the device, mounting and installing instructions, the unit operating rules and maintenance regulations and much more.

Haven’t found a required manual for your Roger H70/103AC?

Check in a while. We update our guides collection and add new documents on a daily basis for you to be always able to find the very paper you need on our web-site. In case you own a directory or an instruction for Roger H70/103AC, which is absent on our site, and you’d like to share it with the public, please send it to us as a scanned copy or a PDF file, and we’ll definitely place it on our page while providing your name as a supplier of the doc. Lots of our users will be grateful for your assistance!