Радиотелефон ge 1 8ghz dect digital инструкция

Инструкция пользователя на русском языке

Категория

Схемы телефонов и для телефонов

материалы в категории

Инструкция пользователя радиотелефона GENERAL ELECTRIC GE CE27850 на русском языке

Файл в формате PDF.
Скачать файл можно из вложения.
У нас на сайте все бесплатно, без регистрации и проверено антивирусом!

Занимаетесь ремонтом телефонных аппаратов, возникли вопросы или есть желание поделиться опытом?

Заходите к нам на ФОРУМ!

page

charge/in use

do not

disturb

TALK

CALL

BACK

DECT

format

conf

redial

SPEAKER

program

delete

int

mute

ABC

DEC

GHI

JKL

MNO

PO

RS

TUV

WX

YZ

OP

ER

memory

flash

0

#

1

2

3

4

5

6

7

8

9

call

er ID-volume

exit

Introduction

CAUTION: When using telephone equipment, there are basic safety

instructions that should always be followed. Refer to the IMPORTANT

SAFETY INSTRUCTIONS provided with this product and save them for

future reference.

IMPORTANT: Because cordless phones operate on electricity, you should

have at least one phone in your home that isn’t cordless, in case the

power in your home goes out.

Before You Begin

Parts Checklist

(for 28111xx1 model)

Make sure your package includes the items shown here.

Model 28111 Series

1.9GHz DECT Cordless

Handset Speakerphone

System User’s Guide

Equipment Approval Information

Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in

compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone

Terminal Equipment published by ACTA.
1 Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other information, the US number and

Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to

your telephone company.
The REN is useful in determining the number of devices you may connect to your telephone line and

still have all of these devices ring when your telephone number is called. In most (but not all) areas, the

sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of

devices you may connect to your line as determined by the REN, you should contact your local telephone

company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must

comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant

telephone cord and modular plug is provided with this product. It is designed to be connected to a

compatible modular jack that is also compliant. See installation instructions for details.
Notes
• This equipment may not be used on coin service provided by the telephone company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone

equipment if you are on a party line. Check with your local telephone company.

• Notice must be given to the telephone company upon permanent disconnection of your telephone

from your line.

• If your home has specially wired alarm equipment connected to the telephone line, ensure the

installation of this product does not disable your alarm equipment. If you have questions about what

will disable alarm equipment, consult your telephone company or a qualified installer.

US Number is located on the cabinet bottom.

REN Number is located on the cabinet bottom.

2 Rights of the Telephone Company

Should your equipment cause trouble on y our line which may harm the telephone network, the

telephone company shall, where practicable, notify you that temporary discontinuance of service

may be required. Where prior notice is not practicable and the circumstances warrant such action,

the telephone company may temporarily discontinue service immediately. In case of such temporary

discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance;

(2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a

complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and

Regulations.

4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into place.

Base Station

1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your

cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it

on the wall.

2. Plug one end of the telephone line cord into the TEL LINE jack on the back of the base and

the other end into a modular jack.

Programming Functions

The system uses a menu structure to give you access to all of the built-in features. You may

program the following items in main menu: Room Monitor and Handset Setup.

Room Monitor

(applicable only with additional handsets)

1. Make sure your phone is

OFF (not in talk mode).

2. Press the mute/program button to go to the main menu.
3. Press caller ID-volume ( 6 or 5) button to scroll to

ROOM MONITOR.

4. Press mute/program button to enter

ROOM MONITOR menu, ROOM MONITOR EXTENSION?

shows in the display.

4. Press the mute/program button to confirm and the key tone setting shows in

the display.

Area Code

From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the

AREA CODE sub-menu.

2. Press mute/program button to enter the menu.

SET AREA CODE — — — shows in the display.

The default setting is

— — —.

3. Use the touch-tone pad to enter your 3-digit area code.
4. Press the mute/program button to confirm. You will hear a confirmation tone and the new

area code shows in the display.

NOTE: To restore the default setting to — — -, press and release delete

when SET AREA CODE shows in the display.

Tone/Pulse

From the Handset Setup Menu:

1. Press the caller ID-volume ( 5 or 6) button to scroll to the

TONE PULSE sub-menu.

2. Press mute/program button to enter the menu.

TONE/PULSE 41TONE 2PULSE shows in

the display. The default setting is “1 TONE”.

3. Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter

1 TONE or 2 PULSE.

4. Press the mute/program button to confirm. You will hear a confirmation tone and your

selection shows in the display.

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not recommended that

a handset be registered again unless absolutely necessary.
From the Handset Setup Menu:

1. Press the caller ID-volume ( 6 or 5) button to scroll to the

REGISTRATION sub-menu.

2. Press the mute/program button to enter the menu.

REGISTRATION 1YES 42NO — — —shows

in the display. The default setting is 2NO.

3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume ( 6 or

5

) button to scroll to

1YES or 2NO.

4. If you select YES, press the mute/program button.

HOLD BASE PAGE FOR 5 SECONDS, THEN

PRESS HANDSET PROGRAM shows in the display. (Your handset should be held near the

base during registration process.)

5. Press and hold the page button on the base unit until the charge/in use indicator flashes.

Press the handset mute/program button.

REGISTERING shows in the display. HANDSET X

REGISTERED shows in the handset display, where X is the handset number. You may now

rename your handset. (Refer to Step 3 & 4 of Handset Name Section)

NOTE: IF you are re-registering the handset through the handset menu;

to rename your handset you must go to the Handset Name Section and

start from the beginning step.

De-Registration

De-registration cancels registration. During the de-registration process, keep the handset

near the base.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the

DEREGISTRATION sub-menu.

2. Press the mute/program button to enter the menu.

DEREGISTRATION 1YES 42NO — — —

shows in the display The default setting is 2NO.

3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume

( 6 or 5) button to scroll to

1YES or 2NO.

WARNING: It is not recommended that a handset be de-registered unless

absolutely necessary because once a handset is de-registered, that handset’s

telephone features cannot be used until the handset is re-registered.

4. Select NO, if you do not want to de-register.
5. If you select YES, press the mute/program button and

MOVE NEAR TO BASE displays for 2

seconds, then

CONFIRM? 1YES 2NO appears in the display.

6. Press the touch-tone pad to select 1 for YES or 2 for NO, or use the caller ID-volume ( 6 or

5

) button to scroll to

1YES or 2NO.

7. If you select YES, press the mute/program button to confirm.

DE-REGISTER… shows in the

display. You will hear a confirmation tone. Then

HANDSET X DEREGISTERED shows in the

display to confirm the handset is deregistered.

NOTE: When you complete the de-registration process, HANDSET

NEEDS REGISTRATION shows in the display. To use the handset,

you MUST re-register the handset using the Registration process.

Global De-registration

If one or more handsets becomes lost, you should de-register all handsets to ensure proper

system operation. Follow the steps below to de-register all handsets at the same time.

WARNING: It is not recommended that a handset be de-registered unless

absolutely necessary because once a handset is de-registered, that handset’s

telephone features cannot be used until the handset is re-registered.

1. Press and hold the page button on the base until the charge/in use indicator on the base

flashes.

2. Press and hold the page button on the base again until the charge/in use indicator on the

base flashes rapidly.

Thomson Inc.

10330 North Meridian St.

Indianapolis, IN 46290-1024

© 2006 Thomson Inc.

Trademark(s) ® Registered

Marca(s) Registrada(s)

Model 28111

00015922 (Rev. 0 Dom E)

06-29

Printed in China

Modular

telephone

line jack

Wall plate

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSE THIS

PRODUCT TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

CAUTION:

Base

Handset

Belt clip

Telephone line cord

AC power adaptor

Handset

battery pack

Battery compartment

cover

3. Press and release the page button on the base once. All handsets are de-registered and

HANDSET NEEDS REGISTRATION shows in the display.

Default Setting

As you become familiar with this system, you may prefer to use the system’s original settings.

Follow the steps below to return to the factory default settings.
From the Handset Setup Menu:

1. Press the caller ID-volume ( 6 or 5) button to scroll to the

DEFAULT SETTING sub-menu.

2. Press the mute/program button to enter the menu.

DEFAULT SETTING 1YES 2NO shows in

the display. The default setting is 2NO.

3. Use the touch-tone pad to select

1YES or 2NO, or use the caller ID-volume ( 6 or 5) button

to move the cursor to

1YES or 2NO.

NOTE: If you choose YES all the settings in the programmable menu are

returned to factory default setting.

4. Press the mute/program button to save your selection. You will hear a confirmation tone.

Telephone Operation

Visual Indicators

Charge/In Use Indicator on Base

The charge/in use indicator on the base will flash to alert you to an incoming call, during

paging, or if you have a message waiting from your service provider. The indicator will remain

lit when a handset is in the base charging or when the line is in use.

TALK/CALL BACK Indicator on Handset

The TALK/CALL BACK and SPEAKER indicator buttons flash when you receive a call and

remain lit during a call.

VMWI Indicator on Handset

IMPORTANT: In order to use this unit’s Visual Message Waiting Indicator

(VMWI) feature, you must subscribe to this service from your phone company.

The VMWI indicator on the top of the handset flashes when you receive a new message from

your service provider.

Speakerphone Operation

.

NOTE: If you are using the speakerphone, remain close to handset so the

party you are speaking to can hear you.

If you are using the handset and want to switch to the speakerphone, press the SPEAKER

button, press SPEAKER again to end conversation.
If you are using the speakerphone and want to switch to the handset, press the TALK/

CALL BACK button, press TALK/CALL BACK again to end conversation.

Making a Call

1. Press the TALK/CALL BACK or SPEAKER button. Dial the desired number.

— OR —

Dial the number first, then press the TALK/CALL BACK or SPEAKER button.

— OR —

Press the caller ID-volume ( 6 or 5) button to select the desired record, then press the

TALK/CALL BACK or SPEAKER button.

2. When finished, press the TALK/CALL BACK or SPEAKER button to hang up.

NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the

delete button until all of the digits are erased.

Answering Calls

1. When the phone rings, press the SPEAKER button on the handset,

— OR —

Pick up the handset and press the TALK/CALL BACK button.
2. When finished, press SPEAKER or TALK/CALL BACK to hang up.

NOTE: Adjust the handset volume by pressing the caller ID-volume

( 6 or 5) button during a call.

Call Timer

After you press the TALK/CALL BACK button on the handset, the built-in call timer shows on the

display and counts the length of time of the call in minutes and seconds.

Auto Standby

If you place the handset in the cradle while the handset is off the hook (during a call), the call is

automatically disconnected.

Ringer HI/LO/OFF (Shortcut)

There are two ways to set the ringer to HI/LO/OFF. One is the traditional way as described in

the Programming Functions; Handset Setup; Ringer Volume menus. The other one is this short

cut to ringer menu.
1. Make sure the phone is

OFF (not in talk mode).

2. Press the #pause/ringer button to display

SET RINGER 1HI 2LO 3OFF.

The telephone company may make changes in its communications facilities, equipment, operations or

procedures where such action is required in the operation of its business and not inconsistent with FCC

Rules and Regulations. If these changes are expected to affect the use or performance of your telephone

equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain

uninterrupted service.

Interference Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference; and (2) This device must accept any interference received,

including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation.
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving”

the interference).

• Reorient or relocate and increase the separation between the telecommunications equipment and

receiving antenna.

• Connect the telecommunications equipment into an outlet on a circuit different from that to which the

receiving antenna is connected.

If these measures do not eliminate the interference, please consult your dealer or an experienced

radio/television technician for additional suggestions. Also, the Federal Communications Commission has

prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is

available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number

004-000-00345-4 when ordering copies.
Notice: The changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

Hearing Aid Compatibility (HAC)

This telephone system meets FCC standards for Hearing Aid Compatibility.

Licensing

Licensed under US Patent 6,427,009.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the

radiator and your body. This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter.”
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used

with the belt clip supplied with this product. Use of other accessories may not ensure compliance with FCC

RF exposure guidelines.

display

TALK/CALL BACK

(button)

caller ID-volume

down (button)

caller ID-volume up

(button)

delete

(button)

redial

(button)

*TONE/exit

(button)

#pause/ringer

(button)

flash

(button)

conf/format

(conference/format

button)

memory

(button)

SPEAKER

(button)

mute/program

(button)

Your new GE telephone system is EXPANDABLE

up to a total of 4 handsets (by purchase of optional

Model 28110 handset with charge cradle)

Wall mount

bracket

For

Model 28111xx2 there will be ONE additional handset, charge cradle, belt clip, battery

pack and cover than shown above.
For

Model 28111xx3 there will be TWO additional handsets, charge cradles, belt clips, battery

packs and covers than shown above.
For

Model 28111xx4 there will be THREE additional handsets, charge cradles, belt clips, battery

packs and covers than shown above.

Telephone Jack Requirements

To use this phone, you need an RJ11C type modular telephone jack,

which might look like the one pictured here, installed in your home.

If you don’t have a modular jack, call your local phone company to

find out how to get one installed.

Installation

Digital Security System

Your cordless phone uses a digital security system to protect against false ringing,

unauthorized access, and charges to your phone line.

INSTALLATION NOTE: Some cordless telephones operate at frequencies

that may cause or receive interference with nearby TVs, microwave

ovens, and VCRs. To minimize or prevent such interference, the base

of the cordless telephone should not be placed near or on top of a TV,

microwave ovens, or VCR. If such interference continues, move the

cordless telephone farther away from these appliances.
Certain other communications devices may also use the 1.9GHz DECT

frequency for communication, and, if not properly set, these devices

may interfere with each other and/or your new telephone. If you are

concerned with interference, please refer to the owner’s manual for these

devices on how to properly set channels to avoid interference. Typical

devices that may use the 1.9GHz DECT frequency for communication

include wireless audio/video senders, wireless computer networks, multi-

handset cordless telephone systems, and some long-range cordless

telephone systems.

Important Installation Guidelines

• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens,

heating appliances and direct sunlight.

• Avoid areas of excessive dust, moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for

wet locations.

• Never touch non-insulated telephone wires or terminals, unless the telephone line has

been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

Handset Layout

int

(intercom button)

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before use.

CAUTION: To reduce the risk of fire or personal injury, use only the

Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model

5-2721, that is compatible with this unit.

1. Locate battery and battery door which are packaged together inside a plastic bag and are

separate from the handset.

2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.

NOTE: To ensure proper battery installation, the connector is keyed and

can be inserted only one way.

3. Plug the AC power adaptor into the electrical outlet and the DC connector into the jack on

the back of the base.

4. Place the handset in the base cradle. The charge/in use indicator turns on, verifying the

battery is charging.

5. Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge the

phone, battery performance is compromised.

CAUTION: Use only the Thomson Inc. 5-2715 power adaptor that came

with this unit. Using other power adaptors may damage the unit.

Wall Mounting

1. Turn the base over.
2. Attach the wall mounting pedestal by first inserting the tabs on the open edge of the

pedestal into the slots on the lower portion of the bottom of the base. Then push down and

snap the pedestal into place.

3. Slip the mounting holes (on the back of the base) over the wall plate posts, and slide the unit

down into place. (Wall plate not included.)

NOTE : If desired, gather the extra telephone line and power adaptor cord

and store inside the wall mounting bracket.

Programming the Telephone

Standby Screen

The handset displays the handset number and user name.

Ringer Tone

You may choose from ten different ringer tones and ten different melodies.
From the Handset Setup Menu:

1. Press the caller ID-volume ( 6 or 5) button to scroll to the

RINGER TONE sub-menu.

2. Press mute/program button to enter the menu.

SET RINGER TONE 01 shows in the display.

The default setting is 01.

3. Use the caller ID-volume ( 6 or 5) button to scroll to the desired setting (1 through 20). You

will hear a sample of the ringer tone/melody you select.

4. Press the mute/program button to save your selection. You will hear a confirmation tone

and the selected ringer tone shows in the display.

NOTE: You must have the Ringer Volume set to ON for ring tone to signal

an incoming call.

Ringer Volume

From the Handset Setup Menu:

1. Press the caller ID-volume ( 6 or 5) button to scroll to the

RINGER VOLUME sub-menu.

2. Press mute/program button to enter the menu.

SET RINGER 41HI 2LO 3OFF shows in the

display. The default setting is HI.

3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the caller ID-volume

( 6 or 5) button to scroll to your selection.

4. Press the mute/program button to save your selection. You will hear a confirmation tone and

the new volume setting shows in the display.

NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.

VIP Melody

This feature allows you to assign a specific melody to someone you want to get your attention

when the person calls. When a VIP melody is assigned and that person calls, the unit rings the

normal ring for the first ring and then follows with VIP melody ring. You may choose from ten

different polyphonic melodies and may store up to 10 VIP records.

NOTE: This feature ONLY works when the following conditions are met.

1. You have subscribed to Caller ID.

2. You have your Caller ID record previously transferred to the memory.

(Refer to Storing CID Records in Internal Memory). NO USER memory will

show in the display to remind the user to do CID record transfer first.

Storing VIP Melody

From the Handset Setup Menu:

1. Press the caller ID-volume ( 6 or 5) button to scroll to

VIP MELODY sub-menu.

2. Press mute/program button to select

VIP MELODY feature and then display VIP 1 record.

— If VIP1 does NOT contain any specific number/records, it will display **

EMPTY**.

3. Press caller ID-volume ( 6 or 5) button to select the specific VIP melody memory location

(10 VIP locations) that does not contain any record.

4. Press mute/program button to display

SELECT MEMORY.

NOTE: If the memory location does not contain any CID memory records

and you are trying to mark a specific record as VIP MELODY, then SELECT

MEMORY will not be displayed. Instead, NO USER MEMORY will display in

prompt to alert the user.

5. Press caller ID-volume ( 6 or 5) button to view the records from memory to be selected as VIP.
6. Press mute/program button to confirm and then display

VIP MELODY 01 to wait for the

melody tone selection.

7. Press caller ID-volume ( 6 or 5) button to select from melody 01 to melody 10

(a testing tone is generated while making melody selection)

8. Press mute/program button to confirm.

NOTE: If the desired number/record was previously stored in any one of

the ten VIP melody records, DUPLICATE NUMBER shows in the display.

Changing a Stored VIP Melody Record

Use the Storing VIP Melody procedure to change the number of a selected record and replace

the old phone number with new phone number.
When

REPLACE VIP# ? shows in the display, you must press mute/program button on the

handset to confirm replacement.

Reviewing And Deleting Stored VIP Melody Record

1. Press the caller ID-volume ( 6 or 5) button to scroll to

VIP MELODY sub-menu.

2. Press mute/program button to select

VIP MELODY feature and then display VIP 1 record.

3. Use the caller ID-volume ( 6 or 5) button to scroll to the desired VIP Melody Record.
4. If you want to delete the information, press the delete button on the handset while the entry

displays. The display shows

DELETE VIP# ?.

5. Press delete again to confirm. You will hear a confirmation tone and

VIP# DELETED shows

in the display.

Key Tone

From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the

KEY TONE sub-menu.

2. Press mute/program button to enter the menu.

SET KEY TONE 41ON 2 OFF shows in the

display. The default setting is 1ON.

3. Use the touch tone pad on the handset to select 1 or 2, or use the caller ID-volume

( 6 or 5) button to scroll to your selection.

USER NAME

HANDSET X

> ROOM MONITOR

EXTENSION?

5. Use the touch tone pad to enter the handset name/number to be monitored.

NOTE: When this phone system is expanded (up to 4 handsets by

purchase of optional Model 28110 handset with recharge cradle),

handsets are named HANDSET 1, HANDSET 2, HANDSET 3 and HANDSET

4 respectively.

6. The receiving handset will turn on the microphone and the originating handset will turn on

the speakerphone to monitor sound from the receiving handset.

NOTE: For room monitoring mode to work, the originating handset must

NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit an alert

tone approximately every 5 seconds if there is an incoming call. You may

press the SPEAKER button to quit room monitor and answer the call.
NOTE: While in room monitoring mode, the originating handset can

be switched to monitor by handset earpiece by pressing the TALK/

CALL BACK button once. Switch back to speakerphone by pressing the

SPEAKER button once.
NOTE: Press the *TONE/exit button on the handset to exit room monitor mode.

Handset Setup

1. Make sure your phone is

OFF (not in talk mode).

2. Press the mute/program button to go to the main menu.
3. Press caller ID-volume ( 6 or 5) button to scroll to

HANDSET SETUP.

4. Press mute/program button to confirm and you may program the following items: Language,

Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Area Code, Tone/Pulse,

Registration, Deregistration and Default Setting.

NOTE: During programming, you may press the *TONE/exit button at any

time to exit the sub-menu and return to the menu.

Language

From the Handset Setup Menu:

1. Press the caller ID-volume ( 6 or 5) button to scroll to the

SET LANGUAGE sub-menu.

2. Press mute/program button to enter the menu.

SET LANGUAGE 41ENG 2FRA 3ESP shows

in the display. The default setting is 1ENG.

3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the caller ID-

volume ( 6 or 5) button to scroll to the desired language.

4. Press the mute/program button to save your selection. You will hear a confirmation tone

and the selected language shows in the display.

Handset Name

From the Handset Setup Menu:

1. Press the caller ID-volume ( 6 or 5) button to scroll to the

HANDSET NAME sub-menu.

2. Press mute/program button to enter the menu.

HANDSET NAME shows in the display. The

default setting is HANDSET #.

3. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of

the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3
times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter
L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the
letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the
letter T; press the 4 key twice for the letter H.

NOTE: If you make a mistake, use the delete button to backspace and

delete one character at a time.

4. Press the mute/program button to save your name. You will hear a confirmation tone and

the handset name shows in the display.

3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the caller ID-volume

( 6 or 5) button to scroll to your selection. HI is the default setting.

4. Press #pause/ringer button again to save and display the new selection for a few seconds.

Flash/Call Waiting

If you subscribe to the combined Call Waiting Caller ID service from your local telephone

company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone

call, you will hear a beep to indicate another call is waiting on the line and Caller ID information

for the waiting call shows on the handset display.
• To connect to the waiting call, press the flash button on the handset, and your original call

is put on hold.

• To switch between the two calls, press the flash button.

TIP: Do not press the TALK/CALL BACK button on the handset to activate a

custom calling service, such as call waiting, or call will disconnect.

Last Number Redial

You may redial a number up to 32 digits long. To quickly redial the last number you dialed:

1. Press the TALK/CALL BACK button.
2. Press the redial button.

-OR-

3. Press the redial button first, then use the caller ID-volume ( 6 or 5) button to select the

desired redial number.

— Press the caller ID-volume ( 5) to review the oldest call and scroll toward the most recent

calls (higher numbers).

— Press the caller ID-volume ( 6 ) to review the newest call and scroll to older calls (lower

numbers).

NOTE: You may choose from three last dialed numbers.

4. Press the TALK/CALL BACK button. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the redial button to quickly

redial the number.

Exit

Press the *TONE/exit button to exit a menu function and return to the standby screen.

Page

The page feature helps you locate a misplaced handset. To send and receive pages, all

handsets must be registered. If your handset is not registered, follow the instructions in the

Registration section of this manual.

Handset Paging

(applicable only with additional handsets)

1. Make sure the phone is

OFF (not in talk mode).

2. Press and release the int button on a handset.

PAGING EXTENSION? shows in the display.

3. Use the touch-tone pad to enter the handset number you want to page. (1= to page

Handset 1, 2=to page handset 2, etc., and 5=to page all handsets)

4. To cancel the page, press the *TONE/exit, int, or TALK/CALL BACK button on the originating

handset, or press the *TONE/exit button on the receiving handset.

Base Paging

Use the base-only to page all registered handsets at the same time.

1. Press the page button on the base. All handsets beep for two minutes, and

PAGING FROM

BASE shows on each handset’s display.

2. To cancel the page, press the page button on the base, or press the TALK/CALL BACK button

or the *TONE/exit button on each handset.

Mute

To have a private, off-line conversation, use the MUTE feature. The party on the telephone line

cannot hear you, but you can hear them.
1. Press the mute/program button. The handset display shows

MUTE ON.

2. Press the mute/program button to cancel and return to your phone conversation.

Receiver Volume Control

When the handset is

ON (in talk mode) you may adjust the receiver volume by pressing the

caller ID-volume ( 6 or 5) button. There are four volume levels to choose from. When the

maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and

VOL 4 is maximum.

Do Not Disturb (DND)

DND allows you to mute the ringer on all handsets.
In the standby mode, press the do not disturb button on the base. The DND indicator will light

and

DO NOT DISTURB shows in handset display.

To cancel, press the do not disturb button again.

page (button)

charge/in use

(indicator)

do not

disturb

(button)

Base Layout

black wire

red wire

battery

pack

PRESS DOWN

FIRMLY

page

charge/in use

do not

disturb

TALK

CALL

BACK

DECT

format

conf

redial

SPEAKER

program

delete

int

mute

ABC

DEC

GHI

JKL

MNO

PO

RS

TUV

WX

YZ

OP

ER

memory

flash

0

#

1

2

3

4

5

6

7

8

9

call

er ID-volume

exit

Visual Message Waiting

Indicator (VMWI)

• 1 stron
• 0.53 mb

Изделие GE DECT 00018673, а также другие, которыми Вы пользуетесь ежедневно, наверняка вы получили в комплекте с инструкцией обслуживания. Из опыта наших пользователей мы знаем, что большинство из Вас не уделили этому особого внимания. Большая часть инструкций, сразу же после покупки попадает в корзину для мусора вместе с коробкой — это ошибка. Ознакомьтесь с информацией, касающейся инструкции GE DECT 00018673, которая поможет Вам в будущем сэкономить нервы и избежать головной боли.

Важная подсказка — не забывайте хотя бы раз прочитать инструкцию GE DECT 00018673

Summary of Contents for GE DECT 00018673

Что находится в инструкции GE DECT 00018673? Почему стоит ее прочитать?

1. Гарантия и подробности, касающиеся техобслуживания изделия
   Хорошей идеей будет прикрепить чек к странице инструкции. Если что-то плохое случится во время использования GE DECT 00018673, у вас будет комплект документов, необходимый для гарантийного ремонта. В этой части инструкции вы найдете информацию об авторизованных сервисных центрахGE DECT 00018673 а также, как самостоятельно правильно ухаживать за оборудованием — так, чтобы не потерять гарантийных прав.
2. Указания по монтажу и Setup
   Не терять нервов и времени на самостоятельную попытку установки и первого запуска изделия. Воспользуйтесь рекомендациями производителя GE DECT 00018673 чтобы правильно запустить изделие, без лишнего риска повреждения оборудования.
3. Информация, касающаяся дополнительных запчастей (входящих в комплект а также являющихся опцией)
   Пересматривая эту часть документа вы сможете проверить, доставлен ли ваш GE DECT 00018673 с полним комплектом аксессуаров. Вы также сможете узнать, какие дополнительные запчасти или аксессуары для GE DECT 00018673 Вы сможете найти и докупить к своему устройству.
4. Troubleshooting
   Самые частые проблемы, касающиеся GE DECT 00018673 и методы их решения. Это очень полезная часть руководства по обслуживанию — она позволит Вам сэкономить много времени на поиск решений. 90% проблем с GE DECT 00018673 повторяется у многих пользователей.
5. Требования, касающиеся питания и энергетический класс
   Информация, касающаяся количества потребляемой энергии, а также рекомендации, касающиеся установки и питания GE DECT 00018673. Прочитайте, чтобы оптимально пользоваться GE DECT 00018673 и не использовать большего количества ресурсов, нежели это необходимо для правильной работы изделия.
6. Специальные функции GE DECT 00018673
   Здесь вы можешь узнать, как персонализировать изделие GE DECT 00018673. Вы узнаете, какие дополнительные функции могут помочь Вам удобно использовать продукт GE DECT 00018673 а также, какие функции Вашего устройства оптимальны для выполнения конкретной деятельности.

Как видите в инструкции вы найдете информацию, которая реально поможет Вам в использовании Вашего изделия. Стоит с ней ознакомиться, чтобы избежать разочарований, возникающих из более короткого, нежели предусматривалось, периода исправности изделия GE DECT 00018673. Если все же вы не хотите копить инструкции в своем доме, наш сайт поможет Вам в этом — вы должны найти у нас руководство по обслуживанию большинства из своих устройств, а также GE DECT 00018673.

Комментарии (0)