Принтер lexmark 4126 k03 инструкция

1. Manuals
2. Computer Equipment Support
3. Lexmark Support
4. Printer Support

Asked by charles on 03/06/2015

0 
Answer

«WOW! Finally my PC got up to speed!» Melany Kim 7/18/2016

Our main support OS are: Windows 7, Windows 7 64 bit, Windows 7 32 bit, Windows 10, Windows 10 64 bit, Windows 10 32 bit, and Windows 8.

Lexmark 4126 K03 Driver Details:

Lexmark 4126 K03 File Name: lexmark_4126_k03.zip

Lexmark 4126 K03 Driver Version: 8015OASf

Lexmark 4126 K03 ZIP Size: 129.kb

Manufacturer: Lexmark

Lexmark 4126 K03 was fully scanned at: 11/26/2023

Scan Status: OK

Lexmark 4126 K03 Download Stats:

Driver Uploaded: 1/26/2019

Direct Downloads: 643
Most Recent Download: 11/15/2019

Managed Downloads: 282
Most Recent Download: 11/3/2019

Download Mirrors: 1
Current Delay: 23 Seconds
Driver License: General Public License

Please help us maintain a helpfull driver collection.
After downloading and installing Lexmark 4126 K03, or the driver installation manager, take a few minutes to send us a report:
* Only registered users can upload a report.

Don’t have a password?
Please register, and get one.

Lexmark 4126 K03 may sometimes be at fault for other drivers ceasing to function

These are the driver scans of 2 of our recent wiki members*

*Scans were performed on computers suffering from Lexmark 4126 K03 disfunctions.

Scan performed on 4/25/2019, Computer: Compaq FK583AA-A2L SR5633WM — Windows 7 64 bit

Outdated or Corrupted drivers:7/21

Scan performed on 4/26/2019, Computer: HP Compaq 615 — Windows 7 32 bit

Outdated or Corrupted drivers:11/21

Technical Reference

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

© 2004 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550

Edition: August 2004

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point of purchase.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

Lexmark, Lexmark with diamond design, MarkNet, MarkVision, and Optra are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. ColorGrade, PerfectFinish, and PictureGrade are trademarks of Lexmark International, Inc.

The following terms are trademarks or registered trademarks of other companies:

AppleTalk, EtherTalk, LocalTalk, and Macintosh are trademarks of Apple Computer, Inc., registered in the United States and other countries. PCL® is a registered trademark of the Hewlett-Packard Company. PCL 3, PCL 5, and PCL 6 are Hewlett-Packard Company’s designatio ns of a set of printer commands (language) and functions included in its printer products. These printers are intended to be compatible with the PCL 3, PCL 5, and PCL 6 languages. This means these printers recognize PCL 3, PCL 5, and PCL 6 commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript is Adobe Systems’ designation of a set of printer commands (language) and functions included in its software products. These printers are intended to be compatible with the PostScript language. This means these printers recognize PostScript commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

Other trademarks are the property of their respective owners.

Safety Information

•If your product is not marked with this symbol , it must be connected to an electrical outlet that is properly grounded. CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power cord or telephone, during a lightning storm.

•The power cord must be connected to an electrical outlet that is near the product and easily accessible.

•Refer to the Setup Guide for additional safety information, and for setting up the equipment.

•Refer service or repairs, other than those described in the operating instructions, to a professional service person.

©1998, 2004 Lexmark International, Inc.

All rights reserved.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense.

Provides information about using the flash memory and hard disk. It describes how to manage printer memory, store resources (such as fonts and macros), and manage files.

1-3 Introduction

Chapter 7: “Printer Specifications”

Lists printer specifications, including information about hardware and environmental conditions.

Chapter 8: “Printer Interfaces”

Provides information on printer interfaces, including information about parallel and serial interface, network support, and communication protocols.

See the tables in the three appendixes to determine if your printer supports a particular PCL emulation, PJL, or PostScript emulation command. The appendixes are:

Appendix A: “PCL Support”

Appendix B: “PJL Support”

Appendix C: “PostScript Support”

2-1 PCL

CHAPTER 2: PCL Emulation

When you select PCL emulation as the printer language, the printer supports the Hewlett-Packard Company’s LaserJet Printer Command Language. This chapter shows how to select PCL emulation and discusses PCL emulation commands, along with resident PCL emulation font and symbol set support.

To determine which commands your printer supports, see Appendix A: “PCL Support” on page A-1.

Selecting PCL Emulation

Using SmartSwitch

When SmartSwitch is enabled for both printer languages on an interface (for example, Parallel, USB, Serial Option 1, or Network Option 1), the printer automatically switches to the printer language being sent by your software program. The printer is shipped with SmartSwitch enabled for both printer languages in all interfaces. The printer examines all print jobs and switches dynamically between PostScript emulation and PCL emulation.

Using the Operator Panel or MarkVision Professional

If SmartSwitch is set to Off for both printer languages, you can select PCL emulation from your printer operator panel or from MarkVision™ Professional. Refer to your printer user documentation for information on changing menu settings.

2-2 PCL

Using Your Software Program

To select PCL emulation, use the Printer Job Language (PJL) Enter Language Command. See “ENTER LANGUAGE Command” on page 3-3 for more information. See “Printer Job Language” on page 3-1 for the syntax and use of PJL.

Warning: When you change printer languages, you may lose some or all previously downloaded resources, unless Resource Save is set to On or the resources are stored in flash memory or on disk.

2-3 PCL

Page Formatting

The printable areas and logical pages for PCL emulation (both portrait and landscape orientation) are illustrated below. See the Legend that follows for definitions of areas A through I.

Printable Areas

APortrait physical page width and landscape physical page length

BPortrait physical page length and landscape physical page width

CPortrait logical page width

DLandscape logical page width

EDistance between the side edge of the physical page and the logical page in portrait

FDistance between the side edge of the physical page and the logical page in landscape

GDistance between the top and bottom edge of the physical page and logical page

HDistance between the left and right edge of the physical page and the printable area in portrait, or distance between the top and bottom edge of the physical page and printable area in landscape

IDistance between the top and bottom edge of the physical page and the printable area in portrait, or distance between the left and right edge of the physical page and the printable area in landscape

Note: The tables beginning on page 2-4 list the page sizes and dimensions of each area labeled on the preceding diagram for all paper and envelope sizes your printer supports. If information about your printer is not included in the following tables, see page 1-1 for information on how to get a Technical Reference for your printer.

2-4 PCL

Lexmark C510(n)

The following table lists page sizes and print area dimensions for all paper and envelope sizes the Lexmark C510(n) printer supports. For more information about the printable areas and logical pages for PCL emulation, see “Printable Areas” on page 2-3.

Table 2-1: Lexmark C510(n) Paper and Envelope Dimensions

1 Pel dimensions are for 600 dpi.

2 Page Size Parameters are explained in Table 2-30 on page 2-64.

3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application.

4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.

5 The Lexmark C510(n) supports this size media only with an optional legal tray.

Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information about Print Area, see page 2-6.

2-5 PCL

Lexmark X422

The following table lists page sizes and print area dimensions for all paper and envelope sizes the Lexmark X422 printer supports. For more information about the printable areas and logical pages for PCL emulation, see “Printable Areas” on page 2-3.

Table 2-2: Lexmark X422 Paper and Envelope Dimensions

1 Pel dimensions are for 600 dpi.

2 Page Size Parameters are explained in Table 2-30 on page 2-64.

3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application.

4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039.

Note: The explanation of the printable area assumes the Print Area menu item is set to Normal. For more information about Print Area, see page 2-6.

2-6 PCL

Lexmark E230, E232, E234(n), E330, E332n

The following table lists page sizes and print area dimensions for all paper and envelope sizes the Lexmark E230, E232, E234(n), E330, and E332n printer supports. For more information about the printable areas and logical pages for PCL emulation, see “Printable Areas” on page 2-3.

2-7 PCL

Print Area Menu Item

The printable area is the area on a sheet of paper within which a pel can be printed. Logical page is a conceptual entity that defines the area in which margins (top, bottom, left, right) may be set and the area in which the PCL cursor may be positioned.

The physical page border is the actual physical boundaries of a page.

The Print Area menu item is available from the printer operator panel or through MarkVision Professional. For some printers, Print Area supports three values: Normal, Whole Page, and Fit to Page. Refer to your printer user documentation for more information.

The Normal setting, which is the factory default, means the printable area includes the entire page except the narrow border around the edge of the page. This is the nonprintable area. The printer measures margin settings relative to the logical page.

For a more detailed explanation of the Normal setting, see “Printable Areas” on page 2-3.

2-8 PCL

The Whole Page setting only affects pages printed when using PCL emulation. If Whole Page is selected, the PCL language sets the logical page area equal to the physical page dimensions. Since the logical page dimensions and the physical page dimensions are the same, in theory, the cursor may be positioned anywhere on the page. However, the PCL language clips the image to the printable area. So, the Whole Page setting is useful for printing scanned images that extend from edge to edge of a page.

Some printers offer the Fit to Page setting. When Fit to Page is selected, PCL emulation or PostScript emulation formats a page using a printable area equal to the physical page, which is from one edge of the page to the other edge of the page. If you use this setting, no clipping occurs. In Fit to Page, the PCL emulation logical page dimensions are equal to the physical page dimensions, as in the Whole Page setting.

The printer holds this formatted image in memory, but when the page prints, the image is compressed a small amount in both horizontal and vertical directions, and then centered on the physical page for letter-size paper only. This process creates a small margin around the image. This artificial margin prevents printing from one edge to the other, since doing so could contaminate the printer and cause printing problems.

The following illustrations show an image held in memory for printing from one edge to the other and how the image would actually print based on the Fit to Page setting. Notice that a small border appears at the edges of the printed page, and the image is slightly compressed.

2-9 PCL

Font and Symbol Set Support for the Lexmark X422

Your printer has 91 resident fonts in PCL emulation, including 89 scalable fonts and two bitmapped fonts.

Several parameters are used to select a font from the data stream. These include symbol set, spacing, point or pitch, style, weight, and typeface number. For scalable fonts, you can vary the size of a font by specifying pitch or point size. For bitmapped fonts, you must choose the pitch or point size listed on the font sample pages. You can print the font sample pages from the MFP control panel, using a PJL command (see “LPRINTPCLFONTS” on page 3-83.) or through MarkVision Professional. Refer to your printer user documentation for more information.

A symbol set defines which characters are available for a font and the code point for each of these characters. Your printer supports 88 symbol sets. The tables beginning on page 2-15 show the symbol sets available for each font in PCL emulation. Not all fonts support all symbol sets.

You can select a font as the PCL emulation default from the MFP control panel or through MarkVision Professional. Refer to your printer user documentation for more information.

The fonts are divided into three major groups. The first 47 fonts (R0 through R46) shown on the font sample pages are the standard PCL emulation fonts. The next 39 fonts (R47 through R85) are called Type 1 fonts and were originally defined for PostScript emulation, but now also work in the PCL emulation. The last five fonts (R86 through R90) include three different Code 3 of 9 bar code fonts, OCR-A and OCR-B fonts.

The fonts are further divided into font groups A, B, and C indicating which symbol sets are supported by each font. For a list of the 47 standard PCL emulation fonts, as well as the OCR and Code 3 of 9 bar code fonts, see Table 2-4 on page 2-10. For a list of the 39 Type 1 fonts, see Table 2-5 on page 2-13. Both tables list the forward and backward compatibility font selection commands and the font group (A, B, or C) for each font. For more information on forward and backward compatibility, see

page 2-10. For more information on selecting symbol sets, see page 2-15.

For compatibility purposes, you can disable Type 1 fonts with the Printer Job Language (PJL) LTYPE1FONTS command. The factory default for these fonts is Enabled. See LTYPE1FONTS on page 3-47 for more information.

You can also select fonts using PJL commands. The selection parameter is the number portion from the font identifier shown on the font sample pages, such as 0 or 76 from font identifiers R0 or R76. Use the PJL values shown in the tables beginning on page 2-15 to select a symbol set. If a symbol set does not have a PJL value, use the symbol set ID to select the symbol set. A font selection can be either temporary or set as the default.

Use the following PJL commands to select fonts: FONTSOURCE, FONTNUMBER,

PITCH, PTSIZE, SYMSET, SET, DEFAULT. See Table 3-5: “Common Variables for

PCL Emulation” on page 3-48 for more information about these commands.

Forward and Backward Compatibility Modes for the Lexmark X422

Your PCL emulation has forward and backward compatibility modes. The forward compatibility mode is used to emulate the fonts in the Hewlett-Packard Company’s LaserJet 4050. The backward compatibility mode is used for compatibility with the Hewlett-Packard Company’s LaserJet 5 and the Lexmark family of printers.

Standard PCL Emulation Fonts, OCR and Code 3 of 9 bar code fonts

Table 2-4 on page 2-10 lists the font selection commands for forward and backward compatibility mode for each of the 47 standard PCL emulation fonts, the OCR and Code 3 of 9 bar code fonts. Since the font selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. Most fonts are assigned a font group indicating which symbol sets that font supports.

To determine which symbol sets are supported by a particular font, find the font group (A, B, or C) for the font in Table 2-4, and then see Table 2-6 on page 2-15 for the symbol sets that belong to that group.

Table 2-4: Forward and Backward Compatibility Font Selection Commands

1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Table 2-4: Forward and Backward Compatibility Font Selection

1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Table 2-4: Forward and Backward Compatibility Font Selection

1 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Type 1 Fonts

Thirty of the Type 1 fonts have different font selection parameters in the forward and backward compatibility modes and 9 of the fonts work only in the forward compatibility mode. With the appropriate printer driver installed and selected, your software application selects these fonts.

The following table shows the font selection commands for forward and backward compatibility modes and indicates the font group for each font. All Type 1 fonts are supported by both the Hewlett-Packard Company’s LaserJet 4050 and the Lexmark family of printers unless otherwise noted.

To determine which symbol sets are supported by a particular font, find the font group (A, B, or C) for the font in Table 2-5, and then see Table 2-6 on page 2-15 for the symbol sets that belong to that group.

Table 2-5: Forward and Backward Compatibility Font Selection Commands

1 Notice the values for forward compatibility and backward compatibility modes differ slightly for Bold.

2 This font is not implemented in the Hewlett-Packard Company’s LaserJet 4050.

3 For the symbol sets supported by this font, see Table 2-7: “Non-Text PCL Emulation Symbol Sets” on page 2-17.

Table 2-5: Forward and Backward Compatibility Font Selection Commands (Continued)