Пежо 407 инструкция по эксплуатации

Попалась в просторах нашего безгранной сети данная книга по эксплуатации и ремонту.
Для себя в ней нашёл много давно интересующих для меня вопрос! Как не как там 760 страниц.
Файл 270 мв. так что лучше качайте перед просмотром.
Книга 407

23 января 2015

Метки: своими руками

19

Ранее ходовая по мелочам.
Далее Камера заднего вида

Войдите или зарегистрируйтесь, чтобы писать комментарии, задавать вопросы и участвовать в обсуждении.

Имя: Владимир

Сообщения: 887

Откуда: ЗАМКАДЫШ!

Уменя есть такая книга — полезная!

Имя: FABOR

Сообщения: 156

Откуда: Киев

У меня такая есть.Ничего интересного,информация только по кнопочкам,а если какойто дефект так сразу едте на сервис..

Сообщения: 298

Откуда: Belgie

может у кого есть ссылка на руководство одним файлом?

Сообщения: 298

Откуда: Belgie

спасибо ,уже давно нашел

108 — 407 saloon and 407 SW comfort

1. Centre panel vents.

2. Temperature and humidity sensor.

3. Adjustment of the glove box air flow (see section «Interior layout»).

4. Air outlet to passenger footwells.

5. Two ventilation vents at the rear at the base of the centre console between the passengers.

6. Side vents.

7. Front windows de-icing or demisting vents.

8. Windscreen de-icing or demisting vents.

9. Sunshine sensor.

10. Air diffuser grille.

Air diffuser

The air diffuser grille, located at the top of the centre console, significantly improves distribution and flows and prevents air currents, while maintaining an optimum temperature inside the passenger compartment.

118 — 407 saloon and 407 SW comfort

Remote control failure, alarm set

FUnlock the doors with the key and open the door. The alarm is triggered.

FSwitch on the ignition. The alarm is disarmed.

Incorrect operation

When the ignition is switched on, if button A lights for ten seconds, there is a fault in the siren connection.

Contact a PEUGEOT dealer to have the system checked.

Automatic activation*

The alarm is activated automatically two minutes after the last closure of a door or the boot.

In order to avoid accidental triggering of the alarm when a door or the boot is opened, it is essential to press the unlocking button on the remote control again.

* According to country.

CRUISE CONTROL

The cruise control function allows you to choose and maintain a constant vehicle speed, called the «cruising speed», irrespective of the profile of the road and without any action on the part of the driver on the accelerator pedal or the brake pedal.

The «cruising speed» is chosen by the driver and must comply with the highway regulations in use at local and national level.

The cruise control function must not be used on slippery roads or in heavy traffic.

11-10-2004

407 saloon and 407 SW comfort — 119

120 — 407 saloon and 407 SW comfort

Volume adjustment

1 — Increase by pressing the back

2 — Decrease by pressing the back

1 + 2 — Press Mute (sound cut-off)

Search/Selection by pressing

3 — Higher radio frequency — CD/CD changer: next

4 — Lower radio frequency — CD/CD changer: previous

Sound sources

5 — Change of sound source

Selection of the stored stations/ CD in the changer (rotation)

6 — Higher stored station — Next CD

7 — Lower stored station — Previous CD

11-10-2004

Button (A)

ON/OFF and volume adjustment.

Button (B)

CD eject.

Keypad (1)

AUDIO: access to the RD4 audio equipment displays.

SOURCE: changing of source between radio, CD, CD changer.

TRIP: trip computer display.

BAND: Selection of the frequency wavebands.

CLIM: access to the air conditioning displays.

DARK: 1st press: black screen under the banner — 2nd press: completely black screen — 3rd press: return to the display.

Keypad (2)

ESC (Escape): cancellation of the operation in progress.

MENU: displaying of the general menu.

¯: access to the musical ambience settings.

Keypad (3)

Navigator.

Keypad (4)

TA: function on/off — traffic information priority.

LIST: displaying of the list of stations received, of the tracks on the CD.

PTY: access to the PTY function.

Keypad (5)

Selection of the stored station, of the CD depending on the position in the

CD changer.

: 65

‘PORSCHE TIPTRONIC

SYSTEM’ AUTOMATIC GEARBOX

The four or six speed automatic gearbox offers, as required, the comfort of the auto-adaptive program enhanced by a selection suited to dynamic driving conditions: sport, or to driving on a slippery road: snow.

However, manual selection is still possible using the gear lever.

11-10-2004

407 saloon and 407 SW comfort — 125

126 — 407 saloon and 407 SW comfort

Notes

It is only possible to change from one gear to another if the vehicle speed and engine speed permit. If they do not, the vehicle will operate temporarily in automatic mode.

When the vehicle is stationary or moving very slowly, the gearbox automatically selects gear M1.

Programs S (sport) and T (snow) do not operate in manual gear selection mode.

Operating check

Any operating abnormality is indicated by lighting of this warning light, accompanied by an audible signal and a

message on the multi-function display.

In this situation the gearbox operates in downgrade mode (locked in 3rd gear). You may feel a substantial knock when changing from P to R and from N to R (this will not cause any damage to the gearbox).

Do not exceed 60 mph (100 km/h) or keep within local speed limits.

Contact a PEUGEOT dealer as soon as possible.

If the battery is flat and the lever in is position P, it will be impossible to change to another position.

In particular, do not force the lever or there is a risk the gearbox may be damaged.

6-SPEED MANUAL GEARBOX

Reverse

To change to reverse gear, lift the ring under the gear lever knob and push the gear lever to the left then to the front.

Reverse gear can only be engaged when the vehicle is stationary with the engine idling.

THE HANDBRAKE

To apply

When parking on a slope, turn the wheels towards the kerb and apply the handbrake.

To release

Pull the handle and press the button to release the handbrake.

The handbrake must not be used to stop or brake the vehicle while it is moving.

ANTI-LOCK BRAKING SYSTEM (ABS)

The ABS increases the stability and manoevrability of your vehicle on braking, in particular on poor or slippery road surfaces.

This system comes into operation automatically when there is a risk of wheel lock.

Normal operation of the ABS may make itself felt by slight vibrations of the brake pedal.

In emergency braking, press very firmly without releasing the pressure.

Note: when changing wheels (tyres and rims), make sure that these are approved.

This indicates that the ABS is faulty.

It comes on on the instrument panel screen also.

If it comes on permanently above 6 mph (10 km/h), it indicates an ABS malfunction.

However, the vehicle retains conventional servo-assisted braking.

Contact a PEUGEOT dealer.

EMERGENCY BRAKING

ASSISTANCE SYSTEM

In an emergency, this system enables the optimum braking pressure to be reached more quickly, thus reducing the stopping distance.

It is triggered by the speed at which the brake pedal is activated. The effect of this is a reduction in the resistance of the pedal and an increase in braking efficiency.

ELECTRONIC STABILITY CONTROL (ESP)

This system is linked and complementary to the ABS system.

In the event of a significant variation between the trajectory of the vehicle and the path required by the driver, the ESP monitors wheel by wheel and acts automatically on the engine and on the brake of one or more wheels, to put the vehicle back on course, within the limit of the laws of physics.

ESP operation

The indicator light flashes.

The indicator light comes on.

407 saloon and 407 SW comfort — 129

Button (A)

ON/OFF and volume adjustment.

Button (B)

CD eject.

Keypad (1)

AUDIO: access to the RT3 audio equipment displays.

TEL: access to the telephone displays. TRIP: trip computer displays.

NAV: displaying of the navigation — guidance welcome menu.

CLIM: displaying of the air conditioning settings welcome menu.

DARK: 1st press: black screen under the banner — 2nd press: completely black screen — 3rd press: return to the display.

11-10-2004

Keypad (2)

ESC (Escape): cancellation of the operation in progress.

MENU: displaying of the general menu.

C: deletion of the last character entered or of the entire line.

Keypad (3)

Navigator.

Keypad (4)

TEL (green): pick up an incoming call.

LION:accesstothePEUGEOTservices menu.

TEL (red): hang up.

Keypad (5)

Selection of the stored radio station.

Selection of the station stored, of the CD depending on the position in the CD changer.

Telephone keypad — alphanumeric inputting keypad.

Keypad (6)

Audio — CD player controls bar.

: 78

130 — 407 saloon and 407 SW comfort

Operating check

This is confirmed by the switch light and the indicator lights.

In the event of a fault, it comes on, accompanied by an audible signal and a message on the multifunction display.

Select automatic operation and contact a PEUGEOT dealer as soon as possible.

REAR PARKING ASSISTANCE

This system consists of four proximity sensors, located in the rear bumper.

This detects any obstacle (person, cyclist, vehicle, tree, gate, etc.) behind the vehicle. Nevertheless, it cannot detect obstacles located just below the bumper.

Warning: an object, such as a stake, a roadworks cone or any other similar object detected at the beginning of the manoeuvre may no longer be detected during the manoeuvre.

To make manoeuvres in reverse gear easier, adjust your mirrors in accordance with the «Automatic tilting of the mirrors in reverse gear» function.

Maintenance: ensure that the sensors are not covered with mud, frost or snow.

Activation

The system is activated as soon as reverse gear is engaged; an audible bleep shows that it is active.

The proximity information is given by an audible signal, which becomes more rapid as the vehicle approaches the obstacle.

11-10-2004

407 saloon and 407 SW comfort — 131

132 — 407 saloon and 407 SW comfort

All repairs and changing of tyres on a wheel fitted with this system must be carried out by a PEUGEOT dealer.

If, when changing a tyre, you install a wheel which is not detected by your vehicle, you must have the system reinitialised by a PEUGEOT dealer.

The tyre under-inflation detection system is an aid to driving which does not replace the need for the driver to be vigilant or to drive responsibly.

This system does not eliminate the need to have the tyre pressure checked regularly (see manufacturer’s label on the door pillar) to ensure that the optimum dynamic performance of the vehicle is maintained and prevent premature wear of the tyres, particularly in arduous driving conditions (heavy load, high speed).

The tyre pressures must be checked cold, at least once a month.

Remember to check the pressure of the spare wheel.

The tyre under-inflation detection system may experience temporary interference due to radioelectric emissions on a frequency close to that used by the system.

CHANGING A WHEEL

F Park the vehicle on level, stable and non-slippery ground.

F Apply the handbrake, switch off the ignition and engage first or reverse gear (position P for the automatic gearbox).

F Never go underneath a vehicle which is supported only by a jack.

Access to the spare wheel and the jack in the boot

F Lift the floor using the lifting handle. Secure the handle behind the boot seal.

Tools available

The following tools are located in the holder in the centre of the spare wheel:

1 — Wheelbrace.

2 — Centralising tool

(for alloy wheels only). 3 — Wheelbrace extension.

4 — Jack.

5 — Removable towing eye.

6 — Alloy wheel trim cover tool.

Removal

F For vehicles with steel wheels, detach the trim using extension 3 pulling at the valve passage hole.

F For vehicles with alloy wheels, remove the trim covers using tool 6.

FLoosen the wheel bolts.

FTake the jack from the tool kit.

FPlace the jack 4 in one of the four locations underneath the vehicle (the nearest one to the wheel to be changed).

FExtend the jack using wheelbrace 1 and the extension 3.

FRemove a wheel bolt at the top and fit the centralising tool 2 in its place.

FUnscrew the other bolts and remove the wheel.

134 — 407 saloon and 407 SW comfort

Information on the instrument panel:

Punctured tyre warning light

Tyre under-inflation detection system warning light

These original wheels are fitted with a pressure sensor (see paragraph «Tyre under-inflation detection»). The alarm which detects the removal or absence of a wheel fitted with the indicator sensor signals the anomaly. Have the wheel repaired and checked by a PEUGEOT dealer.

Special features of alloy wheels

Bolt covers

Alloy wheel bolts are covered by chrome trims.

Use tool 6 to remove the trims before slackening the bolts.

11-10-2004

407 saloon and 407 SW comfort — 135

Special features of alloy wheels

Bolt covers

Alloy wheel bolts are covered by chrome trims.

Use tool 6 to remove the trims before slackening the bolts.

11-10-2004

407 saloon and 407 SW comfort — 135

136 — 407 saloon and 407 SW comfort

4 — Direction indicators:

PY 21 W (amber).

FTurn the bulb holder a quarter turn and remove it.

FChange the bulb.

Amber coloured bulbs (direction indicators and side repeaters) must be replaced with bulbs of identical specification and colour.

5 — Front fog lamps:

H11-55 W.

Turn the wheels to full lock.

Access to the bulb is via the flap in the front mud flap.

Contact a PEUGEOT dealer.

The headlamps are fitted with polycarbonate glass with a protective coating. Do not clean them with a dry or abrasive cloth, nor with a detergent or solvent product.

Ensure that the liquid used to fill the wash-wipe and headlamp wash reservoir is of good quality.

In certain climatic conditions (low temperature, humidity), condensation on the inside surface of the headlamp glass is normal; it disappears a few minutes after the lights are switched on.

Steering wheel control

1 — Higher stored station — Next CD — Next screen

2 — Pick up/Hang up, change of sound source, selection confirmation

3 — Lower stored station — Previous CD — Previous screen

— telephone menu: dial, directory, list of calls, voice mail

— accept an incoming call

REAR SEATS

To fold down the rear left seat or the rear right seat, always start with the seat, never with the seat back (risk of damage):

F move the front seat(s) forward if necessary,

F place the head restraints in the low position or remove them if necessary.

Check that the seat belt strap is positioned correctly at the side of the seat back.

Ensure that the side seat belt straps are fastened in their clasp (the centre seat belt must not be fastened):

Flift the front of the seat cushion 1,

Ftilt the seat cushion 1 against the front seat(s),

Fpull control 3 forwards to unlock the seat back 2,

Ffold down the seat back 2.

11-10-2004

Note: the seat cushion 1 can be removed with care to increase the volume of the load space.

Squeeze the seat cushion fixings to detach them from their fastenings.

When repositioning:

F fold up the seat back 2 and lock it (the red marker of control 3 should no longer be visible),

Ffold up the seat 1,

Frefit the head restraints if they were removed.

Take care not to trap the seat belt and to position the buckle of each strap correctly in its respective clasp before folding down the seat back. This will enable you to reposition the seat backs with their seat belts and clasps ready to accommodate your rear passengers.

Locking/unlocking the access to the boot via the rear seats

Your vehicle’s boot can be isolated from the passenger compartment.

The red indicator on the control 3 should no longer be visible. If it is, push the seat fully.

Insert the ignition key in the lock 4.

SUNROOF

—To partially open the roof: Turn the switch to the right (three possible settings).

—To open the roof completely: Turn the switch to the left (six possible settings).

—To close it completely: Turn the switch back to position «O».

—Safety auto-reverse: When the sunroof is closing and meets an obstacle, it stops then partially opens again.

The sunroof shutter is manual.

Notes:

After reconnecting the battery, you must reinitialise the safety auto-reverse:

—place the control in the maximum partial opening position (3rd notch to the right),

—wait until the roof is in the maximum partially open position,

—press the control for at least one second.

In the event of unwanted opening of the roof on closing (for example, in the presence of ice), and immediately after the roof stops:

—move the control to the «O» position and press the control immediately,

—continue to press the control until the roof is fully closed.

In the partially open position, the roof closes automatically above 60 mph (100 km/h).

To partially open it again:

—move the control back to the «O» position,

—turn the control to the right.

The safety auto-reverse function is not active during these operations.

407 saloon comfort — 141

Always remove the key from the ignition when leaving the vehicle, even for a short time.

In the event of contact during operation of the roof, you must reverse the movement of the roof. To do this, press the switch concerned.

When the driver operates the roof switch, he must ensure that no one is preventing correct closing of the roof.

The driver must ensure that the passengers use the sunroof correctly.

Be aware of children when operating the roof.

142 — 407 SW comfort

REAR COURTESY LIGHT

1 — Courtesy light

2 — Map reading lights

With the key in the ignition on or starting position, operate the relevant switch.

The rear courtesy light comes on when the ignition key is removed, on unlocking the vehicle or on opening one of the doors.

It gradually goes off after the ignition has been switched on or the vehicle is locked.

F Pressing switch 1 turns on the rear courtesy light.

The courtesy light can be deactivated by pressing switch 1 with the door open. The map reading lights are not affected by this and may be switched on.

FTo re-activate the lights, press the switch, with the door open.

LUGGAGE COMPARTMENT LAYOUT

Lashing rings

Use the 4 lashing rings on the luggage compartment floor to secure your luggage.

Luggage retaining net

Hooked onto the lashing rings, this enables you to secure your luggage.

FITTING ROOF BARS

When fitting transverse roof bars, use the four quick-fit fixings provided for this purpose. Lift the concealing flaps and adjust the roof bar quick-fit fixings.

Maximum authorised weight on the roof rack, for a loading height not exceeding 40 cm (with the exception of bicycle carriers): 80 kg.

If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and the fixings on the roof.

Be sure to refer to national legisation in order to comply with the regulations for transporting objects which are longer than the vehicle.

CHANGING A REAR BULB

1 — Direction indicators:

PY 21 W (amber).

2 — Brake lights/side lights:

P21/4 W.

3 — Reversing lights: P 21 W.

4 — Fog lamps/side lights:

P 21/4 W.

5 — Side lights: P 21/4 W.

407 saloon comfort — 143

REAR SEATS

To fold down the rear left seat or the rear right seat, always start with the seat, never with the seat back (risk of damage):

F move the front seat(s) forward if necessary,

F place the head restraints in the low position or remove them if necessary,

Check that the seat belt strap is positioned correctly at the side of the seat back,

Ensure that side seat belt straps are fastened in their clasp (the centre seat belt must not be fastened),

Flift the front of the seat cushion 1,

Ftilt the seat cushion 1 against the front seat(s),

Fpull control 3 forwards to unlock the seat back 2,

Ffold down the seat back 2.

11-10-2004

Note: the seat cushion 1 can be removed with care to increase the volume of the load space.

Squeeze the seat cushion fixings to detach them from their fastenings.

When repositioning:

F fold up the seat back 2 and lock it (the red marker of control 3 should no longer be visible),

Ffold up the seat 1,

Frefit the head restraints if they were removed.

TRANSPORTING LONG OBJECTS

Front passenger seat:

F Tilt the seat back approximately 25° towards the rear (in relation to the vertical position) using the seat back angle adjustment control (see corresponding paragraph).

F Lift control A upwards to release the seat back.

FWithout releasing control A, press on the top of the seat back and move with it until it is folded.

Rear seat (see corresponding paragraph):

FTilt the seat cushion,

FRemove the head restraints,

FTilt the seat back.

Note: when repositioning, ensure that the front and rear seat backs are secured correctly.

Precautions

—The long object must be placed on the end of the front seat back and on the rear seat cushion.

—Do not place a load in excess of 30 kg on the front of the seat back.

—Do not load sharp objects, this could damage the rear of the front seat back (storage pocket).

REAR WIPER CONTROL

Turn the ring to the first notch for intermittent wiping.

The control must be reactivated if the ignition has been switched off.

To do this, move the control to any position then return it to the required position.

Automatic rear wiper

If the windscreen wipers control is activated and you engage reverse gear, the rear wiper operates in intermittent mode.

Note: if a bicycle carrier is used, deactivate this function by going to the «personalisation-configuration» menu on the multifunction display or install a special bicycle carrier approved by PEUGEOT.

Rear wash-wipe

Turn the ring beyond the first notch, the wash-wipe then the wiper operate for a set period of time.

Note: the rear wiper and rear washwipe functions are deactivated automatically when the rear screen is opened.

TAILGATE AND REAR SCREEN

The locking or unlocking of the tailgate and rear screen is simultaneous with that of the doors.

Opening the tailgate and rear screen

The tailgate and rear screen cannot be opened at the same time.

With the rear screen closed, to open the tailgate, operate the handle A, then lift the tailgate.

With the tailgate closed, to open the rear screen, operate the handle B, then lift the rear screen.

The lighting is controlled by opening the tailgate or the rear screen.

Partial opening of the tailgate*

With the rear screen closed, to partially open the tailgate, press the unlocking button C on the remote control.

Partial opening of the rear screen*

With the tailgate closed, to partially open the rear screen, press the unlocking button C on the remote control.

Notes: the tailgate and rear screen lock automatically when driving at 6 mph (10 km/h) and unlock when one of the doors is opened.

When the rear wiper is in a wiping position, the rear screen cannot be opened until the end of the cycle.

Close the rear screen using the wiper arm or by pressing the centre of the glass.

«Rear screen open» warning

When the engine is running, if the rear screen is not fully closed, you are warned by a message on the multifunction display.

When the vehicle is moving (speed greater than 6 mph (10 km/h)), if the rear screen is not fully closed, you are warned by an audible signal, a message on the multifunction display and lighting of the «Service» warning light.

* According to version.

With the key in the ignition on or starting position, press the corresponding switch.

The rear reading lights come on when the key is removed from the ignition and when the vehicle is unlocked.

They switch off gradually when the ignition is switched on or when the vehicle is locked.

FPressing switch 1 switches on the rear reading light concerned for ten minutes.

To remove:

F Fold up the load space cover fully.

F Unclip the front ends and remove the load space cover.

11-10-2004

To install:

FPosition the front ends of the load space cover on its support and press gently to put it in place.

FUnfold the load space cover fully.

Entering an address and activating guidance

Insert the navigation CD-Rom in the RT3 GPS audio/telephone.

Select by turning the navigator and confirm each choice by pressing the navigator.

Select the «Navigation — Guidance» icon, then confirm.

Select the «Choose a destination» icon, then confirm.

Select the «Enter an address» icon, then confirm.

Familiarisation — 15