Lego education spike prime инструкция по сборке

This program makes Larvy — LEGO SPIKE Prime larva robot move forward indefinitely! The movement of this robot is very interesting as it works like a caterpillar or larvae! The program works by repeating 3 movements every cycle of the loop:

1. the front motor rotates for 90 degrees, rising or collapsing its wheels
2. the large motor rotates for 90 degrees, contracting or expanding the robot
3. the back motor rotates for 90 degrees, rising or collapsing its wheels

You may notice that every movement command does two things, or the same thing but a different direction. That is done using a variable that is either 1 or -1, and that gives the direction that the motors should move. This variable is also used to determine which motor should use full power and which shouldn’t so that the robot doesn’t break itself!

As you might have seen, recently all the cool kids build tensegrity structures. So we decided to make one for those of you who have a Spike prime set and want to build one themselves! In addition this tensegrity structure requires only parts from the set, which means you don’t need to tie any strings on beams or other parts!

At the top of the structure we have two fully functional motors! Can you make something cool with them?

Tohuru, from Maori, means owl.

Tohuru is a SPIKE Prime robot, that holds onto an edge and looks at the nearest object! It uses two medium motors to grip an edge between two wheels. In addition it has a head made out of an ultrasonic sensor, attached to a large motor, which allows it to turn 360 degrees! And most importantly, it looks like an Owl!

An introduction to the SPIKE Prime set! In this course you will have access to 7 3D instructions for SPIKE Prime robots, exploring the possibilities of the base set. After you build them, you can give them life using our cool programs that do various things, from just moving the robot forward, to finding the closest object to it.

After that, if you are up to the challenge, we have prepared some hard additional tasks. They aim to make you research solutions for modifications to the program and the robot. Of course, you can always make your own additions to the robots and have fun with it!