Инструкция видеокамера jvc gr ax637e

• Языки:Английский
• Тип:
  PDF
• Размер:
  829.1 KB

Просмотр

CAUTION

nWhen you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

nDangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

For Italy:

“It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95”

PAL

nOnly cassettes marked “VHS” can be used with this videorecorder.

nHQ VHS is compatible with existing VHS equipment.

nShowView is a trademark applied for by Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar Development Corporation.

IMPORTANT

nPlease read the various precautions on this page before installing or operating the recorder.

nIt should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

The OPERATE button does not completely shut off mains power from the unit, but switches operating current on and off.

Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-speed video recorder.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1. DO NOT place the recorder . . .

… in an environment prone to extreme temperatures or humidity.

… in direct sunlight.

… in a dusty environment.

… in an environment where strong magnetic fields are generated.

… on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder’s ventilation openings.

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

5.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.

Basic

Connections

Back of TV

Rear View

It’s essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

cTo Connect To A TV With NO AV Input Terminals . . .

a– Disconnect the TV aerial cable from the TV.

b– Connect the TV aerial cable to the ANT. IN jack on the rear panel of the recorder.

c– Connect the provided RF cable between the RF OUT jack on the rear panel of the recorder and the TV’s aerial terminal.

**Before operating the recorder, make sure the TV’s channel is set to the VIDEO channel.

AV CONNECTION

cTo Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF CONNECTION”.

b– Connect an optional SCART cable between the AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

c– Set the RF TEST switch to OFF.

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

Tune The TV

To Your Video

Recorder

The video recorder sends picture and sound signals via the RF connecting cable to your TV on UHF channel 36.

Connecting/ Using A Decoder

(A637EH only)

NOTES:

cIf CH36 is occupied by a local station, adjust the RF output channel adjustment screw to use another channel between CH32 and CH40 instead.

cIf some interference noise is continually seen on the screen, consult your JVC dealer.

The AV2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.

Connecting/

Using A Stereo

System

These instructions enable you to connect your video recorder to your Hi-Fi stereo system (if you have one) and listen to the soundtrack through the stereo.

FM Tuner

I

I

I

I

I

I

I

I

I

I

I

I

I

Mains outlet

AUDIO OUT

Rear View

MAKE CONNECTIONS

1 Connect the AUDIO OUT L and R connectors on your video recorder to the AUX IN or TAPE MONITOR terminals on your stereo system’s receiver or amplifier.

NOTES:

cWhen connecting your recorder’s audio output connectors to a stereo amplifier, make sure you connect L and R correctly.

cIf stereo or bilingual TV broadcasts are receivable in your area, this recorder can record them independently of the TV set and play them back through the connected stereo system.

cWhen listening to sound through the connected stereo system, turn the TV’s volume down completely.

CAUTIONS:

cThis recorder has a dynamic range of more than 80 dB with regards to its Hi-Fi audio capability. It is recommended that you check the maximum level if you are going to listen to the Hi-Fi audio signals through a stereo amplifier. A sudden surge in the input level to the speakers may damage them.

cSome speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the speakers adjacent to the TV set as this can adversely affect the video playback picture.

Tuner Set

Your recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. The Auto Tuning System automatically assigns all receivable stations in your area to call them up with the TV PROG. buttons without going through any vacant channels.

The following procedure describes how to select automatic channel setting.

TURN ON THE RECORDER

ACCESS CONFIRMATION DISPLAY

NOTES:

cFine tuning is performed automatically when you select “AUTO” in step 2. If you want to perform it manually, refer to page 25.

cTo set the tuner manually, refer to “Storing Channels Manually” (Z pg. 24).

INFORMATION

If you selected “BELG” or “SUIS” in step 4, you need to enter the language used in your area. This ensures that stations broadcasting programmes in your language will be stored in the highest channel positions. Once you select a language, the recorder selects the region.

After pressing OK in step 5, perform the following procedure:

1.Press PUSH JOG%fito select your language.

c Users living in Belgium should select “DEUT”, “FRA” or “NL”.

c Users living in Suisse should select “DEUT”, “FRA” or “ITAL”.

The available languages appear in the following order:

Clock Set

If you performed Auto Channel Set (Z pg. 7), the recorder’s built-in clock is also set automatically. The Auto and Manual clock setting procedures are necessary when . . .

–a power outage of more than 3 minutes occurs.

–the tuner has been set manually.

–the user desires to set the clock slightly ahead of the actual time.

–the clock was not set even after Auto Tuner Set was performed.

Whether you perform Auto or Manual clock setting, you can use the convenient Just Clock function.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option appears in the Just Clock display, and can be set “ON” or “OFF” (the default setting is “ON”). Press OK until the Just Clock setting begins blinking, then press PUSH JOG%fito change the setting.

Just Clock Channel Position

IMPORTANT: If you turn off Just Clock off, the accuracy of your recorder’s built-in clock may be reduced, which could adversely effect timer recording.

Both Auto and Manual clock setting procedures begin from step

3.

Preparation

TURN THE RECORDER ON

1 Press OPERATE.

ACCESS CLOCK SET DISPLAY

2 Press CLOCK on the remote control. The Clock Set display appears.

Auto Clock Set

RETURN TO NORMAL DISPLAY

4 Once clock setting is completed, press CLOCK to return to the normal display.

• JVC KV-V8 Руководство пользователя

  PDF файлов
  5

  Просмотров
  4341

• JVC HR-S7700EU Руководство пользователя

  PDF файлов
  2

  Просмотров
  4003

• JVC HR-DVS2EU Руководство пользователя

  PDF файлов
  2

  Просмотров
  2808

• JVC HR-S9600EU Инструкция по эксплуатации

  PDF файлов
  1

  Просмотров
  2560

• JVC HR-P51A Инструкция по эксплуатации

  PDF файлов
  1

  Просмотров
  2427

• JVC HR-J248E Инструкция по эксплуатации

  PDF файлов
  1

  Просмотров
  2200

• Цифровые ресиверы
  JVC KD-X50BT Руководство пользователя

  PDF файлов
  4

  Просмотров
  28155

• Автомобильные видеосистемы
  JVC KW-NX7000 Руководство пользователя

  PDF файлов
  5

  Просмотров
  25291

• Ресиверы
  JVC KW-AVX640 Руководство пользователя

  PDF файлов
  5

  Просмотров
  15657

• Цифровые камеры
  JVC DOME CAMERA VN-C215V4U Руководство пользователя

  PDF файлов
  2

  Просмотров
  15276

• Ресиверы
  JVC KW-NX7000BT Руководство пользователя

  PDF файлов
  4

  Просмотров
  14292

• Ресиверы
  JVC KW-AVX740 Руководство пользователя

  PDF файлов
  5

  Просмотров
  14127

• слабая батарея

  Ноутбуки

  Acer

  1310

  Alex 12.02.2016 17:26