Инструкция к метеостанции vitek 3534

Инструкция — VT-3534

Информация отображена на картинке

Информация отображена на картинке

Информация отображена на картинке

Информация отображена на картинке

Vitek VT-3534 PR инструкция по эксплуатации
(20 страниц)

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

MANUAL INSTRUCTION

МОДЕЛЬ VT-3534

ALARM CLOCK / WIRELESS THERMO STATION

ЧАСЫ-БУДИЛЬНИК / БЕСПРОВОДНАЯ ТЕРМОСТАНЦИЯ

OWNER’S MANUAL

Congratulations on your purchase of this alarm/clock/weather station set,
VT-3534. Please take the time to read and understand this manual so you

can begin to enjoy the convenience and features this product has to offer.

Remote Transmitter VT-3534

• drip-proof design with LCD

• socket of external sensor probe

• temperature display in user-selectable °C or °F

• transmission range: up to 40 meters in open area

• battery type: 2 x AA size

ENGLISH

2

FEATURES

Main Display Unit:

• 12/ 24 hour clock and alarm

• local temperature display

• receives and displays temperature
readings from up to 4 remote

transmitter via RF technology of
433MHz

• minimum and maximum tempera-

ture record

• high/ low temperature alarm func-

tion

• temperature trend indicator

• user-selectable °C or °F

• backlight illumination

• battery type: 2 x AA

VT-3534

receiver

VT-3534

transmitter

GETTING STARTED

1. CHANNEL/WEEKDAY — scrolls

through remote channels 1-4; scrolls
through weekday

2. ALARM/(C/F) — toggles between C
and F; 12 and 24 hour format, turns alarm
on/off; clears temperature alarm presets

3. SNOOZE/MODE — scrolls through
time, weekday, language, time zone,
alarm and temperature alarm set points
(high/low); activates alarm snooze

4. HOUR/MONTH/MAX/+ — scrolls
through hours, months and languages;
shows maximum temperature

5. MINUTE/DAY/MIN/- — scrolls
through minutes, days and languages;
show minimum temperature

6. R — reset the receiver

7. SET: enter to House code and Channel setting mode

8. C/F: change between C or F, change channel and house code

9. Battery compartment

10.Socket for external sensor probe.

11. Wall Mount Holder & Table Stand

12. LCD display

ENGLISH

3

SETTING UP

• Set up the transmitter(s) before set-

ting up the receiver

1. Remove battery cover and insert batteries

to start setup 2 AA size batteries (included)

Insert batteries into compartment observing
proper polarity

2. HOUSE CODE will flash for 8 seconds

3. Select HOUSE CODE (1-15) by pressing

C/F and pressing SET to CHANNEL setting

If you have multiple transmitters for a single
receiver, set each transmitter
to the same

House code

4. CHANNEL will flash for 8 seconds

5. Select CHANNEL (1-4) by pressing C/F

If you have multiple transmitters for a single receiver, set
each transmitter to a different

Channel code

6. Humidity & Temperature will alternatively display on LCD

screen

7. Select °C or °F of Temperature by pressing C/F

• Use a different house code if your weather station detects other signals

from neighboring sources

• Factory default: house code = 01 and channel = 01

1. Remove battery cover

2. 2 AA size batteries (included)

3. Insert batteries into compartment,

observing proper polarity; replace cover

REPLACING BATTERIES: symbol on
receiver will appear when batteries need to be changed.
Transmitter: Lo bat will be displayed

ENGLISH

4

SETTING UP TRANSMITTER(S)

SETTING UP RECEIVER

CLOCK/DATE/LANGUAGE SETTING

Clock Setting:

i. Press and hold MODE for 3 seconds to enter the clock setting mode

(the Clock display will flash)

ii. Press HOUR to set the hour and MINUTE to set the minute
iii. Press ALARM/(C/F) during clock setting, to change between 12 and 24

hour display.

Date Setting:
iV. Press MODE or enter the date setting
V. Press MONTH to set the month, press DAY to set the day and press
WEEKDAY to set the weekday

Language Setting:
Vi. Press MODE or enter the language setting
Vii.Press + or — to select the language for displaying day of the week:

-“ ” German

-“ ” English

-“ ” French

—“ ” Italian

Time Zone Setting:
Viii. Press MODE or enter the time zone setting
iX. Press + or — set the value
X. Press MODE or complete the setting

ENGLISH

5