Инструкция часы касио sgw 500h

•To ensure correct direction readings by this watch, be sure to perform bidirectional calibration before using it. The watch may produce incorrect direction readings if you do not perform bidirectional calibration. For more information, see “To perform bidirectional calibration” (page E-36).

•Keep the watch away from audio speakers, magnetic necklace, cell phone, and other devices that generate strong magnetism. Exposure to strong magnetism can magnetize the watch and cause incorrect direction readings. If incorrect readings continue even after you perform bidirectional calibration, it could mean that your watch has been magnetized. If this happens, contact your original retailer or an authorized CASIO Service Center.

E-2

About This Manual

• Depending on the model of your watch, digital display text appears either as dark figures on a light background, or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background.

• Button operations are indicated using the letters shown in the illustration.

• Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration.

E-3

Use the procedure under “Configuring Home City Settings” (page E-17) to configure your Home City and daylight saving time settings.

Important!

Proper World Time Mode, Sunrise/Sunset Mode, and Moon Age Mode data depend on correct Home City, time, and date settings in the Timekeeping Mode. Make sure you configure these settings correctly.

2. Configure latitude and longitude settings for your current location.

See “To select a Home City by configuring latitude and longitude settings” (page E-20).

E-3 About This Manual

E-4 Things to check before using the watch

E-11 Mode Reference Guide

E-16 Timekeeping

E-17 Configuring Home City Settings

E-17 To configure Home City settings

E-19 To change the Daylight Saving Time (summer time) setting

E-20 Configuring Latitude and Longitude Settings for Your Current Location

E-20 To select a Home City by configuring latitude and longitude settings

E-22 Configuring Current Time and Date Settings

E-22 To change the current time and date settings

E-6

E-29 Taking Direction Readings

E-30 To take a direction reading

E-36 To perform bidirectional calibration

E-38 To perform magnetic declination correction

E-43 Thermometer

E-43 To enter and exit the Thermometer Mode

E-45 To correct the temperature value

E-47 Specifying Temperature Unit

E-47 To specify the temperature unit

E-49 Looking up Sunrise and Sunset Times

E-49 To look up the sunrise and sunset times on a specific date E-50 To toggle between sunrise time and sunset time

E-51 To view the sunrise/sunset time for a particular date

E-7

E-54 To enter the Alarm Mode E-55 To set an alarm time E-56 To test the alarm

E-57 To turn an alarm and the Hourly Time Signal on and off E-57 To stop the alarm

E-58 Using the Stopwatch

E-58 To enter the Stopwatch Mode

E-58 To perform an elapsed time operation E-58 To pause at a split time

E-61 To perform a countdown timer operation

E-62 To stop the alarm

E-63 Checking the Current Time in a Different Time Zone

E-63 To enter the World Time Mode

E-64 To view the time in another time zone

E-64 To specify standard time or daylight saving time (DST) for a city

E-65 Illumination

E-65 To turn on illumination

E-66 To change the illumination duration

E-68 Button Operation Tone

Selecting a Mode

•The illustration below shows which buttons you need to press to navigate between modes.

•To return to the Timekeeping Mode from any other mode, hold down C for about two seconds.

•In any mode, press L to illuminate the display.

World Time Mode

Thermometer Mode

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

• If you do not perform any operation for a certain amount of time in certain modes as shown in the table below, the watch will automatically return to the Timekeeping Mode.

• If you leave a setting screen (one with flashing digits) on the digital display for two or three minutes without performing any operation, the watch exits the setting screen automatically.

Initial Screens

When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or World Time Mode, the data you were viewing when you last exited the mode will appear first.

Scrolling

The B and D buttons are used on the setting screen to scroll through available settings on the digital display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

•Each press of A in the Timekeeping Mode toggles the digital display between the current date and the current time.

•You can select one of the two following Date Screen display formats: SUN 6.30 or SUN 30.6. For information about how to select the format, see “Date Display Format” under “To change the current time and date settings” (page E-22).

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or daylight saving time (DST).

To configure Home City settings

1. In the Timekeeping Mode, hold down A for at least two

City Name seconds until ADJUST appears on the digital display. This is the setting mode. Release A after ADJUST appears.

• The city name of the currently selected Home City

data will appear on the digital display with an arrow ( ) flashing to the left.

•The watch will exit the setting mode automatically if you do not perform any operation for about two or three minutes.

•For details about city data, see the “City Data Table” at the back of this manual.

2.Press D (East) and B (West) to scroll through city names until the one you want to use as your Home City data is displayed.

3.Press C to display the DST setting screen.

4.Press D to toggle between Daylight Saving Time (DST ON) and Standard Time (DST OFF).

5.When the setting is the way you want, press A twice to

To change the Daylight Saving Time (summer time) setting

Note

•For information about selecting a Home City and configuring the DST setting, see “Configuring Home City Settings” (page E-17).

•The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

•Changing your Home City setting will initialize the latitude and longitude settings to the location of the Home City.

Hand Home Position Adjustment

The hour, minute, and second hands of this watch can be put out of position by strong magnetism or strong impact. When this happens, you can use the procedure below to adjust the hand positions.

Hour and minute hands

Correct hour and minute hand positions

2.Check the position of the second hand.

•If the second hand is pointing to 12 o’clock, it is in the correct home position. If it isn’t, use D (forward) and B (back) to adjust the second hand position so it points to 12 o’clock.

•Holding down either button will cause the second hand to move at high speed.

3.Press C. This will cause 0:00 to flash on the digital display, indicating the hour and minute adjustment mode.

4.Check the positions of the hour and minute hands.

•The hands are in the correct home positions if they are pointing to 12 o’clock. If they aren’t, use D (forward) and B (back) to adjust their positions.

•Holding down either button will cause the hour and minute hands to move at high speed.

5.Press A to exit the setting screen.

•This will cause the hour and minute hands to move to the current Timekeeping Mode time.

Taking Direction Readings

The watch has a magnetic sensor that makes it possible to take digital compass readings. You can use the digital compass to find the direction to a specific objective and to determine your current position.

•See “Magnetic North and True North” (page E-40) for information about the two types of north. For information about maximizing digital compass accuracy, see “Calibrating Direction Readings” (page E-34) and “Digital Compass Precautions” (page E-40).

• Языки:Русский
• Тип:
  PDF
• Размер:
  291.33 KB
• Описание:
  Наручные часы

Просмотр