Элкометр 224 инструкция по эксплуатации

• Отправить заявку
• Способы оплаты
• Подробнее о доставке

Прошу Вас оформить заказ на: «Профилемер ELCOMETER 224» (https://msa-altair.ru/prod/profilemer-elcometer-224/)

Доставка в Москва

В наличии

• Бесплатная
  доставка
• Оплата при
  получение
• Гарантия 1 год

• Описание
• Технические характеристики
• Комплектность

*Все сведения, указанные на сайте, носят информационный характер и не являются публичной офертой. Производитель на свое усмотрение и без дополнительных уведомлений может менять комплектацию, внешний вид, страну производства и технические характеристики модели. Уточняйте подробную информацию о товаре у продавцов.

Просто позвоните и спросите Наш консультант ответит на все вопросы

• Elcometer 224 R 22 9.3 USING YOUR GAUGE MEMORY The memory in your gauge is accessed using the DATA MENU. To access the DATA MENU press the DATA, or softkey (these softkeys are only displayed with EXTENDED MENU on). The functions in the DATA MENU are described below: EXIT BATCHING Returns the gauge to immediate mode and no further readings are stored in memory. The Reading Screen is displayed. OPEN NEW BATCH Opens (creates) a new batch using the next available batch number. • To create a batch with new settings use OPEN NEW BATCH in immed

• Elcometer 224 English Elcometer 224 Digital Profile Gauge Operating Instructions C O N F I D E N T I A L P R O T O T Y P E — D R A F T I N S T R U C T I O N S —
  

• R CONTENTS Section Page 1 About your gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Taking a reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 The display . . . . . . . . . . . . . . . . . . . . . . . .

• Elcometer 224 R 32 12.2 [TOP] GAUGES Use your Bluetooth ® interface or the optional gauge-to-PC connection cable with ElcoMaster software to create and upload the screen — see the instructions included with ElcoMaster. 13 STORAGE AND TRANSIT This gauge incorporates a Liquid Crystal Display (LCD). If the display is heated above 50°C (120°F) it may be damaged. This can happen if the gauge is left in a car parked in strong sunlight. Always store the gauge in its carrying pouch when it is not being used. Remove the batteries from the gauge and store them separately if the gauge is to

• R 36 18 RELATED EQUIPMENT Elcometer produces a wide range of surface testing equipment and other associated paint inspection equipment. Users of the Elcometer 224 may also benefit from the following Elcometer products: • Elcometer Mechanical surface profile gauges • Elcometer Surface replica tape (Testex) • Elcometer Surface comparators • Elcometer Material thickness gauges • Elcometer Surface cleanliness test kits Other Bluetooth ® products within the Elcometer product range include : • Elcometer 456 Dry Film Thicknes Gauges • Elcometer 3

• Elcometer 224 R 30 BLUETOOTH ® PIN If at any time ElcoMaster requests a PIN number for your gauge, select MENU>ABOUT>GAUGE INFORMATION. The display will show the Bluetooth ® PIN in the bottom right corner (in the example shown, ‘01358’): Each gauge has a different PIN — use the PIN shown on your Gauge Information screen. TRANSFERRING MEASUREMENTS AS THEY ARE TAKEN Measurement data can be transferred from your gauge to ElcoMaster via a Bluetooth ® connection as the readings are taken. Your gauge includes a feature which checks that a reading taken by

• Elcometer 224 R 19 8.1 ENLARGE STATS Displays the chosen statistical values as double-height characters. The example screens (below) appear when all the statistical values are selected. The Up/Down softkeys can be used to move through the list. The OK softkey returns the gauge to the Reading Screen. 8.2 STATS ON LCD Activates the presentation of the chosen statistical values on the reading screen. Enlar g ed Statistics Reading Screen with all statistics
  

• R 7 3 TAKING A READING 3.1 BEFORE YOU START • Have you zeroed the gauge? . . . . . . . . . . .See “Zeroing your gauge” on page 6. • Do you require statistics? . . . . . . . . . . . . . .See “Statistics” on page 17. • [TOP] Do you want to save readings? . . . .See “[TOP] Batching” on page 21. • What units of measurement do you want? .See “UNITS — Select from µm, mil or thou.” on page 16. 3.2 PROCEDURE 1. Switch on the gauge. 2. Hold the gauge with the probe pressed firmly c against the surface you are measuring such that the tip of the probe reaches

• R 16 • UNITS — Select from µm, mil or thou. • AUTO SWITCH OFF — Changes delay before gauge switches off. Minimum = 1 minute (default); Maximum = 10 minutes; ‘Off’ = disabled • OUTPUT — Selects [TOP] Bluetooth ® PC Reply option, baud rate and activates data output via the interface — see “Interface” on page 5. • [TOP] BLUETOOTH PC REPLY — Toggle tick box to activate/deactivate. When activated, and a Bluetooth ® connection is established between your gauge and a PC, the gauge will expect a reply from the PC

• Elcometer 224 R 12 5.4 [TOP] MENU STATS Enlarge stats Stats on LCD Clear Stats Select Stats   DATA Exit batching Open new batch Open existing batch Review batches Set limits Free memory ZERO Zero gauge MENU Backlight Zero locked    z z z z z Extended menu Print/Output Delete Setup About Reset RESET Factory zero ABOUT Gauge information Contact Help PRINT/OUTPUT Single batch All batches Current statistics DELETE Last reading Single batch All batches SETUP Statistics Data z z z z    Units Auto switch off 1 Output Beep volume 3 Languages Large fonts Sof

• Elcometer 224 R 27 FREE MEMORY This option displays the amount of free memory available for storage of readings. 10 [STANDARD] TRANSFERRING READINGS TO A COMPUTER OR PRINTER This section (10) applies to Elcometer 224 Standard gauges only. Measurement data can be transferred from your gauge to a PC or to the optional Elcometer miniprinter i as the readings are taken. It is also possible to transfer the current statistics to the miniprinter. • To transfer measurement data to a PC as the readings are taken, go to MENU>SETUP>OUTPUT and tick either ‘RS232 BIT IMAGE’ or ‘RS232 PLAIN TEXT�

• Elcometer 224 R 21 9 [TOP] BATCHING (Batching is the term used to describe saving readings in gauge memory.) This section (9) applies to Elcometer 224 Top gauges only. The Elcometer 224 Top operates in one of two modes; immediate or batch. 9.1 IMMEDIATE MODE The gauge takes readings and calculates statistics, but does not store any readings in memory (this is known as ‘rolling statistics’). 9.2 BATCH MODE The gauge takes readings and calculates statistics and stores readings in memory. The gauge stores readings in one of up to 999 separate batches. Batch mode (b

• R 9 5 THE MENUS Gauge configuration and measurement functions are controlled using menus. Most menus contain the following boxes and softkeys: • TICK BOX  — Indicates menu items which can be switched on or off (activated or deactivated). A tick in the box indicates the function is on (activated). • SEL — Selects the option displayed and in some cases toggles the status of a tick box off/on. •Up/Down Ï Ð — Moves the cursor up or down menus. The menus scroll up/down and a line across the screen indicates the start and end of

• Elcometer 224 R 25 The OPEN NEW BATCH screen is then displayed (note the ‘clone’ symbol at top right). OPEN NEW BATCH — Batch mode (cloning) 2. Press OK to create the batch Batch numbering The gauge automatically allocates the next batch number when a new batch is created. Up to 999 batches can be active at any time. Deleted batches are removed from the list so that batch numbers above 999 are valid. A deleted batch number cannot be reused until all the batches are deleted, when the batch number count starts again at 1. OPEN EXISTING BATCH Opens any batch to add more readings. If the gauge is switched off with the batch open, the current batch will r

• Elcometer 224 R 20 8.3 CLEAR STATS Resets to zero all statistical values. 8.4 SELECT STATS Allows the user to chose which statistical values are displayed. The default condition is all values. Use Up/Down softkeys to move cursor and SEL softkey to select or deselect the statistical values. Select Stats Menu
  

• R 34 Soft Pouch T22420050 LCD Window Protection Film, Pack of 50 T99916651 Gauge-to-PC Connection Cable j (9-pin): T99916217 RS232 to USB converter cable: T99916716 Miniprinter k , 230 V (UK Plug): X4569964B Miniprinter, 230 V (European Plug): X4569964C Miniprinter, 110 V (US Plug): X4569964D Miniprinter, gauge-to-printer connection cable (25-pin): T99916267 Miniprinter ribbon cassettes (pack of 5): T9769992- Miniprinter paper rolls (Box of 20): T9999993- [TOP] USB Bluetooth ® Module: T99920130 j. A 9-pin to 25-pin adapter may be required for certain PC RS232 ports. k. 42 column, recha

• Elcometer 224 R 29 • Click Start > Run • Type D:AutoCIS (where ‘D’ is the letter of your CD drive) • Click OK. The software installation wizard will run. 2. Follow the on-screen installation instructions. Follow the instructions included with ElcoMaster to interface your gauge with your PC. If at any time ElcoMaster requests a PIN number for your gauge, press Menu>Bluetooth. The Bluetooth PIN is displayed next to Authentication. Note that each gauge has a unique PIN — use only the PIN for your gauge. 11.3 CABLE CONNECTION 1. Connect your gauge to your PC using the optional

• Elcometer 224 R 17 • SOFTKEYS LOCKED — Toggle tick box to activate/deactivate. When activated, the softkey functions will always be displayed on the screen. When deactivated, the softkey functions disappear automatically from the reading screen and the reading value is expanded to maximum size as shown in the illustration. To view the functions again, press any of the softkeys. Note: Softkey functions are always visible in menus. • OPENING SCREEN — Toggle tick box to activate/deactivate. When activated, an opening (welcome) screen is displayed f when the gauge is switched on. 8 STATISTICS The Elcometer

• Elcometer 224 R 18 When EXTENDED MENU is active, press STATS softkey to access STATS MENU. The statistical values available are: Number of Readings Mean Standard Deviation Hi: Highest Reading Lo: Lowest Reading For more information see: • “Select stats” on page 20 • “Statistics terminology” on page 33 Statistics Menu
  

• R 5 2.2 ON / OFF To switch your gauge on, press . The gauge switches off automatically after 60 seconds; to switch off manually, press and hold . 2.3 KEYPAD The gauge is controlled by four ‘softkeys’. The function of these softkeys varies and is described by symbols and words on the bottom line of the screen. 2.4 INTERFACE A serial interface is located on the side of your gauge. Connect the optional gauge-to- PC connection cable b between your gauge and your PC and then transfer readings and statistics (see page 27) and download welcome screens into your gauge (see p

• Elcometer 224 R 13 6 GAUGE CONFIGURATION AND FUNCTIONS — EXTENDED MENU OFF When extended menu is switched off, the following items are displayed on the screen: 6.1 BACKLIGHT Toggle tick box to activate/deactivate. When activated, the display backlight switches on while the gauge is being used and switches off during periods of inactivity. Note: Battery life is reduced by about one third when the backlight is activated. 6.2 ZERO LOCKED Protects against inadvertent adjustment of zero. Toggle the tick box to activate/deactivate. If ZERO softkey is pressed while ZERO LOCKED is activated the gauge displays ZERO LOCKED USE MENU TO UNLOCK. The message disapp

• Elcometer 224 R The following table associates the relevant 224 model number with its Japanese Mutual Recognition Agreement Law identifiers. The Top version of the product meets the Radio and Telecommunications Terminal Equipment Directive and the Standard ver- sion of the product meets the Electromagnetic Compatibility Directive. The product is Class B, Group 1 ISM equipment according to CISPR 11. Group 1 ISM product: A product in which there is intentionally generated and/or used conductively coupled radio-frequency energy which is necessary for the interna

• Elcometer 224 R 35 17 TECHNICAL DATA Range: 0 µm to 500 µm (0 mils to 20 mils) Accuracy: ±5% or ±5 µm l (±0.2 mil) Resolution: 1 µm (0.1 mils) Measurement speed: >40 readings per minute Weight: 180 g (5.7 oz) Dimensions: 140 mm x 75 mm x 35 mm (5.5″ x 3″ x 1.38″) Operating temperature: 0°C to 50°C (32°F to 120°F) (ambient m ) Storage temperature:- -10°C to 55° (14°F to 130°F) Relative Humidity: 0% to 95 Case: High impact ABS Batteries: 2 x LR03 (AAA), alkaline n dry batteries or rechargeable o equivalent

• R 28 11 [TOP] TRANSFERRING READINGS TO A COMPUTER OR PRINTER This section (11) applies to Elcometer 224 Top gauges only. 11.1 SOFTWARE Your gauge is supplied with ElcoMaster and ElcoMaster Mobile software. ElcoMaster allows you to: • Monitor measurements remotely via Bluetooth • Download readings data from your gauge to the ElcoMaster data management system • Keep your survey notes, inspection reports, photographs and all your other inspection information in one place — ElcoMaster •

• R 31 12 PERSONALISED WELCOME SCREEN A personalised welcome screen can be created and downloaded into the gauge. Screen dimensions are 128 pixels x 64 pixels. The welcome screen is typically used to personalise the gauge with a logo, serial number, user name, etc. This is the first screen displayed when the gauge is switched on. 12.1 [STANDARD] GAUGES Download the Elcometer ‘Welcome Screen Wizard’ software from www.elcometer.com/downloads CREATING THE SCREEN 1. Connect your gauge to your PC using the optional gauge-t

• R 10 5.2 EXTENDED MENU ON When the extended menu is switched on, additional items are added to the menu which give access to more advanced functions, and the STATS softkey is activated. [TOP] When the extended menu is switched on the DATA softkey is also activated. To toggle extended menu on/off, press MENU>EXTENDED MENU.
  

• Elcometer 224 R 8 4 THE DISPLAY The display shows measurement data, menus and gauge settings. The display shown here is a typical TOP reading screen. The reading screen changes depending upon units, [TOP] memory, softkeys locking and whether extended menus are selected. To maximise the size of the reading value on the display, ensure that Softkeys Locked is deactivated — see page 17. • ZERO — Press to zero the gauge (using a glass zero plate). • [TOP] DATA — Press to access, configure and review gauge memory (batching) — see page 21. • STATS — Press to view statistical analysis of readings — see page 17. • MENU — Press to access the setup

• R 4 1.4 PACKAGING The gauge is packed in cardboard and plastic packaging. Please ensure that this packaging is disposed of in an environmentally sensitive manner. Consult your Local Environmental Authority for further guidance. 1.5 CONVENTIONS IN THESE INSTRUCTIONS The Elcometer 224 is controlled using a simple menu structure which helps you get the most from your gauge — see page 9. As an example, the LANGUAGES option which is in SETUP from the MAIN MENU would be shown in these instructions as MENU>SETUP>LANGUAGES. The

• Elcometer 224 R 38 DATA MENU 22 DELETE 15 DELETED READING 15 EXIT BATCHING 22 FREE MEMORY 27 GAUGE INFORMATION 13 HELP 13 LANGUAGES 16 LARGE FONTS 16 OPEN EXISTING BATCH 25 OPEN NEW BATCH 22 OPENING SCREEN 17 OUTPUT 16 PRINT/OUTPUT 14 RESET 14 REVIEW BATCHES 26 RS232 BIT IMAGE 16 RS232 PLAIN TEXT 16 SET LIMITS 26 SETUP 15 SOFTKEY ENABLED 15 SOFTKEYS LOCKED 17 STATISTICS 15 TAG 15 UNITS 16 Mobile devices, transferring data 28 Mode Batch 21 Immediate 21 N Number of readings 33 O On/off 5 Opening screen Creating 31 Disabling 17 P PIN 29, 30 Power supply 35 Printing All

• English R 224 Patent Applied for. Bluetooth SIG QDID = B014393. is a registered trademark of Elcometer Limited. ElcoShip ® and ElcoMaster ® are registered trademarks of Elcometer Limited. ® and Bluetooth ® are trademarks owned by Bluetooth SIG Inc and licensed to Elcometer Limited. All other trademarks acknowledged. © Copyright Elcometer Limited. 2010. All rights reserved. No part of this Document may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or transl

• Elcometer 224 R 14 7 GAUGE CONFIGURATION AND FUNCTIONS — EXTENDED MENU ON When extended menu is switched on, the following additional items are displayed on the screen: 7.1 RESET Resets the gauge to factory settings: • FACTORY ZERO — Returns gauge to zero setting created at time of manufacture of the probe. Factory zero will not necessarily restore a precise zero. The gauge should always be zeroed before use using the glass plate supplied. 7.2 PRINT/OUTPUT Outputs statistics ([TOP] and batch data) to the optional Elcometer miniprinter d via the RS232 interfac

• R 37 19 INDEX A Accessories 33 B Batch mode 21 Batch numbering 25 Batch type Counted average 24 Normal 23 Batches Copying (Cloning) 22 Reviewing 26 Batching 21 Creating new batch 22 Exiting 22 Opening existing batch 25 Batteries Precautions 32 Rechargeable Charging 35 Specification 35 Baud rate 16 Beep Changing volume 16 Switching off 16 Bluetooth Icon in display 8 Transferring readings 29 C Cloning a batch 22 Computer, transferring data

• R 6 CHOOSING LANGUAGE Either: 1. Switch gauge off. 2. Press and hold left hand softkey. 3. Press to switch on gauge. 4. Release left hand softkey. 5. Press Ï or Ð to locate your language, then press SEL. The gauge operates in the new language until changed. Or: Select MENU>SETUP>LANGUAGES 2.6 ZEROING YOUR GAUGE Before taking measurements, always zero your gauge on a hard flat surface; use the glass plate supplied with your gauge or a similar flat surface such as window glass. 1. Press ZERO.

• Elcometer 224 R 11 5.3 [STANDARD] MENU STATS Enlarge Stats Stats on LCD Clear Stats Select Stats   ZERO Zero gauge RESET Factory zero ABOUT Gauge information Contact Help DELETE Last reading SETUP Statistics Output z z z    Units Auto switch off 1 Beep volume 3 Languages Large fonts Softkeys locked Opening screen STATISTICS Select stats Softkey enabled z  SELECT STATS No. of readings Mean      Std deviation Highest reading Lowest reading UNITS µm mil thou    MENU Backlight Zero locked    z z z z z Extended menu Print/Output Delete Setup About Reset PRINT/OUTPUT Current statistics OUTPUT Baud rate RS23

• Elcometer 224 R 26 REVIEW BATCHES Displays contents of any batch. Press the left/right arrows to select the batch you want to review, then press OK. The status area in the bottom half of the screen displays the batch number, batch type and number of readings in the batch. Press to switch the status area on/off. Press the up/down arrows to scroll. SET LIMITS Upper and lower values can be set by the user to monitor specification values. To activate limits tick the LIMITS ON box. To set the UPPER and LOWER limit values move the cursor to the limit required and press SEL. The gauge will display t

• Elcometer 224 R 2 Thank you for your purchase of this Elcometer 224 Digital Profile Gauge. Welcome to Elcometer. Elcometer are world leaders in the design, manufacture and supply of coatings inspection equipment. Our products cover all aspects of coating inspection, from development through application to post application inspection. The Elcometer 224 Digital Profile Gauge is a world beating product. With the purchase of this gauge you now have access to the worldwide service and support network of Elcometer. For more information visit our website at www.elcometer.com. 1

• Elcometer 224 R 3 1.1 FEATURES • Menu-driven graphical user interface •Statistics • RS232 interface • [TOP] Bluetooth® interface • [TOP] High/low limits • [TOP] Memory of up to 50 000 readings in up to 999 batches • [TOP] Display backlight 1.2 STANDARDS Your Elcometer 224 Digital Profile Gauge can be used in accordance with the following National and International Standards, ASTM D 4417-B, SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. For IMO PSPC a , the surface profile of metal surfaces should be measured and recorded. Your Elcometer 224 Digital Profile Gauge can be used for this. 1.3 CHECKI

• R 24 • COUNTED AVE: ( ) — Readings are taken in preset groups, the default being 5 readings per group (n=5). At the end of each group the gauge beeps and calculates the average for the group and stores this average value, which is used for the statistical calculation. The individual readings in the group are not stored. The value for n can be changed by pressing the n=5 h softkey. 3. Upper and lower Limits for the batch can be changed at any time once the batch has been created — see “Set limits” on page 26. 4. Press OK to create the batch Opening new batch in batch mode Opening

• Elcometer 224 R 15 7.3 DELETE Deletes readings. If there is no reading to delete, the gauge displays LAST READING NOT AVAILABLE. • LAST READING — Deletes last reading only. Gauge displays ARE YOU SURE? Select YES to confirm or NO to cancel. • [TOP] SINGLE BATCH — Deletes the batch data. Use the Right/Left softkeys Í Î to locate the batch to be deleted and then press OK. Gauge displays ARE YOU SURE? Select YES to confirm or NO to cancel. • [TOP] ALL BATCHES — Deletes all batches. Gauge displays ARE YOU SURE? Select YES to confirm or NO to cancel. 7.4 SETUP Selects, changes or activates the f

• Elcometer 224 R 33 15 STATISTICS TERMINOLOGY 16 ACCESSORIES The following accessories are available from Elcometer, or your local Elcometer supplier: Pack of 2 Spare Probe Tips, Dust Seals and Fixing Tool T22420053 Pack of 2 Spare Probe Tips and Dust Seals T22420054 Pack of 5 Spare Probe Tips and Dust Seals T22420095 Probe Tip Protection Cap T22419793 Soft Pouch T22420050 Zero Plate with Wallet T22420072 Symbol Term Meaning Hi HIGHEST READING The value of the maximum thickness in a group of readings. Lo LOWEST READING The value of the minimum thickness in a group of readings. MEAN The average of a group of readings; the sum of the individual readings divide

Высокоточный цифровой профилемер Elcometer 224 со встроенным датчиком предназначен для измерения неровностей поверхности.

Имеет версии со встроенным и с выносными датчиками.

Отличительные особенности

Модель Elcometer 224 B — базовая

• быстрое измерение профиля поверхности и получение точных результатов в микронах;
• отображение на дисплее статистических расчетов при проведении измерений;
• интуитивно понятный дружественный интерфейс, меню на русском языке;
• щуп из карбида вольфрама повышенной надежности — до 20000 измерений (заменяется на месте проведения работ);
• не имеет встроенной памяти.

Модель Elcometer 224 T — с расширенным функционалом

• большой объем встроенной памяти (до 150000 результатов в 2500 группах) обеспечивает точную регистрацию каждого значения измерения;
• отображение статистических расчетов на дисплее прибора, и их сохранение для каждой группы результатов измерений;
• ElcomasterTM — программное обеспечение (входит в комплект) позволяет передавать данные на компьютер, подключать мини-принтер и распечатывать результаты измерений, что облегчает составление отчетов.
• прибор имеет три режима работы, включая режим рассчитанного среднего значения и отображает количество измерений, минимальное, максимальное и среднее значения измерения, а также стандартное отклонение.

Преимущества

Дружественность к пользователю:

• благодаря наличию крупных кнопок возможна эксплуатация даже в перчатках;
• меню на русском языке;
• ЖК-дисплей высокой контрастности, с автоповоротом;
• индикаторы пределов измерения (верхнего и нижнего);
• прибор поставляется с заводской калибровкой и готов к использованию.

Точность:

• соответствует национальным и международным стандартам;
• точность до 5% от показаний;
• температурная стабильность измерений;
• статистика составляется и отображается в режиме реального времени;
• результаты отображаются в виде графика, что упрощает анализ.

Надежность:

• результаты измерений воспроизводятся и повторяются без сбоев;
• аппарат может поставляться с контролепригодными тестовыми сертификатами;
• дату и время можно привязать к определенным группам или конкретным результатам измерений;

Прочность и износостойкость:

• благодаря герметичному корпусу, устойчивому к ударам, возможна эксплуатация в сложных условиях;
• конструкция надежна, защита от влаги и пыли соответствует стандарту IP64;
• дисплей устойчив к царапинам и растворителям;

Эффективность:

• скорость проведения измерений — до 60 в минуту;
• датчик выносной / встроенный (для различных измерений);
• энергосберегающий режим с включением от прикосновения;
• именование групп — буквы / цифры;
• совместимость с ElcoMaster 2.0 и ElcoMaster для Android.

Функциональность:

• щуп из карбида вольфрама устойчив к износу, выдерживает до 20000 измерений;
• память позволяет сохранять до 150000 результатов в 2500 группах;
• глубина измеряемого профиля до 500 мкм;
• каналы вывода данных — USB, Bluetooth.

Доступные сертификаты

Калибровочный сертификат производителя Elcometer Limited (опция).

Стандарты:

ASTM D 4417-B, SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000.

* Возможность удалить последние 5 результатов.
¹ Требуется подключение к интернету.

Комплект поставки:

• профилемер Elcometer 224;
• стеклянная нулевая пластина*;
• 2  калибровочные плёнки*;
• ремешок на запястье;
• пластиковый чемодан для переноски (только модель Т);
• защитный чехол;
• защитная плёнка дисплея;
• защитный колпачок датчика*;
• 2 батареи типа AA;
• тестовый сертификат производителя;
• инструкция по эксплуатации;
• ПО ElcoMaster™ 2.0 software и кабель USB (только модель Т).

* Для приборов с выносными датчиками калибровочные плёнки, стеклянная нулевая пластина и защитный колпачок датчика поставляются вместе с выносным датчиком.