Digitech vocalist workstation ex инструкция

4

The Vocalist Workstation EX is equipped with an AC adapter.

Use only the 9.75V AC, 820mA adapter supplied with the

Vocalist Workstation EX (Harmon Pro Group PS750). Any other

adapter may cause damage to the Vocalist Workstation EX.

The Vocalist Workstation EX, like any piece of computer hard-

ware, is sensitive to voltage drops, spikes and surges. Interference

such as lightning or power ÒbrownoutsÓ can erase your program

memory, or even permanently damage the circuitry inside the unit.

Here are some suggestions to help protect your Vocalist

Workstation EX from such a fate:

¥ Turn it off when not in use: Make a habit of turning off all of

your gear when it is not in use. If there is a lightning or severe

windstorm, unplug all of your equipment: A surge from a near-

by lightning strike or downed power line can destroy electronic

equipment even if the switch is off.

¥ Use Spike and Surge Protectors: An inexpensive solution to all

but the most severe of AC line conditions. Surge protected

power strips are usually only slightly more expensive than

unprotected strips, and higher quality multi-stage surge sup-

pressors are usually under $50 Ð a worthy investment for the

protection of all your valuable electronic equipment.

¥ Use AC Line Conditioners: This is the best and most expensive

way to protect your Vocalist Workstation EX from line voltage

fluctuations. Line conditioners constantly monitor the incom-

ing voltage for excessive peaks and dips and make adjustments

accordingly, thereby delivering consistent power levels. For

very expensive equipment, AC line conditioners are an

absolute requirement.

The symbols shown below are internationally accepted symbols

that warn of potential hazards with electrical products. The light-

ning flash with arrowpoint in a equilateral triangle means that

there are dangerous voltages present within the unit. The exclama-

tion point in an equilateral triangle indicates that it is necessary for

the user to refer to the ownerÕs manual,

These symbols warn that there are no user serviceable parts inside

the unit. Do not open the unit. Do not attempt to service the unit

yourself. Refer all servicing to qualified personnel. Opening the

chassis for any reason will void the manufacturerÕs warranty. Do

not get the Vocalist Workstation EX wet. If liquid is spilled on the

unit, unplug it immediately and take it to a dealer for service.

Disconnect the equipment during storms to prevent damage.

Water and Moisture: Appliance should not be used near water

(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, etc). Care should be taken so

that objects do not fall and liquids are not spilled into the enclo-

sure through openings.

POWER SOURCES: The appliance should be connected to a

power supply only of the type described in the operating

instructions or as marked on the appliance.

POWER CORD PROTECTION: Power supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention

to cords at plugs, convenience receptacles, and the point where

they exit from the appliance.

SERVICING: To reduce the risk of fire or electric shock, the user

should not attempt to service the appliance beyond that

described in the operating instructions. All other servicing

should be referred to qualified service personnel.

CAUTION! This product contains a lithium battery. There is dan-

ger of explosion if battery is incorrectly replaced. Replace only

with an Sony CR2032 or equivalent. Make sure the battery is

installed with the correct polarity. Discard used batteries accord-

ing to manufacturerÕs instructions.

ADVARSEL! Lithiumbatteri — Eksplosjonsfare. Ved utskifting

benyttes kun batteri som anbefalt (Sony CR2032) av apparatfab-

rikanten. Brukt batteri returneres apparatleverand¿ren.

ADVARSEL! Lithiumbatteri — Eksplosjonsfare ved fejlagtig

hŒndtering. Udskiftning mŒ kun ske med batteri av samme fab-

rik(Sony CR2032) at og type. LevŽr det brugte batteri tilbage til

leverand¿ren.

VAROITUS! Paristo voi rŠfŠhtŠŠ, jos se on virheellisesti asennet-

tu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan

tyyppin (Sony CR2032). HŠvitŠ kŠytetty paristovalmistajan ohjei-

den mukaisesti.

VARNING! Explosionsfar vid felaktigt batteribyte. AnvŠnd

samma batterityp eller en ekvivalent typ (Sony CR2032) som rek-

ommenderas av apparattillverkaren. Kassera anvŠnt batteri enligt

fabrikantens instruktion.

ATTENTION! Il y a danger dÕexplsion sÕil y a remplacement

incorrect de la batterie. Remplacer uniquement avec une batterie

du m•me type (Sony CR2032) ou dÕun type Žquivalent recom-

mandŽ par le constructeur. Mettre au rebut les batteries usagŽes

conformŽment aux instructions du fabricant.

This unit conforms to the Product Specifications noted on the

Declaration of Conformity. Operation is subject to the following

two conditions:

¥ this device may not cause harmful interference, and

¥ this device must accept any interference received, including

interference that may cause undesired operation. Operation of

this unit within significant electromagnetic fields should be

avoided.

¥ use only shielded interconnecting cables.

10

Vocalist

Workstation

MIDI

Jacks

Synth Module(s)

Synth Module(s)

MIDI Keyboard

MIDI Keyboard

Sequencer

Sequencer

MIDI
OUT

MIDI

THRU

MIDI

IN

MIDI
OUT

MIDI

THRU

MIDI

IN

MIDI
OUT

MIDI

THRU

MIDI

IN

Audio

Recorder

with Vocal

Performance

sync

Vocalist

Workstation

MIDI

Jacks

Vocalist

Workstation

MIDI

Jacks

Basic MIDI Setup

This setup could be used for a live performance or live recording
situation. The Vocalist Workstation EX can recognize the chords
you play and output the appropriate harmony or you could use a
Vocoder preset to play the exact harmony notes you need. These
concepts are explained in greater detail later on in this manual. 
Connect as follows:
¥  Connect the output of your controller keyboard to the MIDI in

of the Vocalist Workstation EX.

¥  Set your keyboard’s MIDI transmit channel to 1 (the Vocalist

Workstation EX’s default channel) or change the Vocalist
Workstation EX’s MIDI receive channel to match your key-
board. See page 33 in the Utilities section for further details.

¥  Connect any MIDI sound modules to the MIDI thru jack.

Intermediate MIDI Setup

This configuration allows you to record key, chord and harmony
style change keystrokes from the front panel into a sequencer for
automated playback later. This could be useful for live vocal per-
formances using sequenced backing tracks. You could also use
the sequencer to back up your edited patches to disk. If you do
extensive editing, it is very important to store backup copies of
your work. 
Connect as follows:
¥  Connect the MIDI output of the Vocalist Workstation EX to

the input of your sequencer or storage device.

¥  Connect the output of the sequencer or storage device to the

Vocalist Workstation EX’s input.

¥  The patch dump from the Vocalist Workstation EX to the stor-

age device must be initiated from the Vocalist Workstation EX.
The Vocalist Workstation EX can receive a patch dump at any
time. See page 42 in the Utilities section for further details.

Advanced MIDI Setup

The setup at left may be found in many audio and MIDI record-
ing studios. The sequencer allows you to record and edit the key-
board performance that controls the harmony voices. Routing the
vocal performance through the Vocalist Workstation EX and
controlling it with the sequencer allows you to ÒcraftÓ exactly the
harmony performance you want. Connect as follows:
¥  Connect the MIDI output of your keyboard to the input of the

sequencer. 

¥  Connect the MIDI output of the sequencer to the input of the

Vocalist Workstation EX. 

¥  Connect your MIDI sound module(s) to the Vocalist

Workstation EX’s Thru jack.

MIDI Connection Examples

Digitech VOCALIST WORKSTATION EX гармонайзер вокальный

Digitech VOCALIST WORKSTATION EX гармонайзер вокальный

О товаре

Студийный вокальный процессор Vocalist Workstation предназначен для насыщения, гармонизации и выравнивания вокала и для акустического обрамления вокальных партий (от 2 до 5 «живо» звучащих стереофонических вокальных гармоний). Прибор имеет очень компактные размеры и при эксплуатации располагается на горизонтальной плоскости. Vocalist Workstation имеет 99 фирменных пресетов. При этом можно создавать и использовать еще до 99 пользовательских программ. 

В приборе предусмотрен встроенный ревербератор, позволяющий имитировать самые разные акустические помещения. Возможна автоматическая коррекция высоты тона, а также работающие в реальном времени фейдеры солирующего вокала, гармонизированных партий и уровня реверберации. 18-битные АЦП со 128-кратной сигма-дельта передискретизацией и 16-битные ЦАП при 48-килогерцовой частоте сэмплирования выдают замечательный студийный звук. На переднюю панель Vocalist Workstation вынесены графический жидкокристаллический дисплей, управляющие кнопки, колесо ввода данных и однооктавная клавиатура. 

Клавиатура и функция записи последовательности аккордов плюс возможность их смены с помощью педали придутся к месту для создания подпевок в группах, выступающих без клавишника. Vocalist Workstation оснащен полным набором MIDI-портов и поддерживает как полное ручное, так и полное MIDI-управление. Состояние прибора полностью передается с помощью команд SysEx. Процессор имеет сбалансированный микрофонный и сбалансированный линейный входы, 2 выхода (L/Mono, R), разъемы для подключения стереонаушников и ножной педали.

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner’s manual, quick start guide, technical datasheets… DON’T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DIGITECH VOCALISTWEX. We hope that this DIGITECH VOCALISTWEX user guide will be useful to you.

Lastmanuals help download the user guide DIGITECH VOCALISTWEX.


DIGITECH VOCALISTWEX : Download the complete user guide (1097 Ko)

Manual abstract: user guide DIGITECH VOCALISTWEX

Detailed instructions for use are in the User’s Guide.

[. . . ] VERSION EX 1. 2

DECLARATION OF CONFORMITY
Manufacturers Name: IVL Technologies Ltd. per DigiTech specifications Manufacturers Address: 6710 Bertram Place Victoria, B. C. Canada V8M 1Z6 declares that the products: DigiTech Vocalist Performer conform to the following product specifications: EMC: EN 55022 (1987): CISPR 22 (1993) Class B EN 50082-1 (1992)

Supplementary Information: The product herewith complies with the requirements of the EMC Directive 89/336/EEC (1989) as amended by the CE Marking Directive 93/68/EEC (1993). Canada V8M 1Z6 February 19, 1997 Peter George, Vice President of Engineering European Contact: Your local DigiTech Sales and Service Office or International Sales Office 3 Overlook Drive Unit #4 Amherst, New Hampshire 03031, USA Tel (603) 672-4244 Fax (603) 672 4246

TABLE OF CONTENTS
Program List Introduction Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Front Panel . [. . . ] The Harmony Type selection screen is displayed.

3. 4.

Your choice here affects the order and selection of editing screens because each different harmony type has its own set of parameters. Rather than explaining the location of editing screens in text, what follows is a table showing the screens in the order in which they appear. The Arrow buttons guide you to the next or previous screen, the softkeys select the different editing fields and the Data Wheel is used to change the values.

Edit screen layout by harmony type:
CHROMATIC: Harmony Type : Voicing : Bending : Pitch Bend : Portamento Rate : Customize : Style Name SCALIC: Voicing : Bending : Pitch Bend : Portamento Rate : Customize : Style Name CHORDAL: Voicing : Harmony Motion : Pitch Bend : Portamento Rate : Customize : Style Name VOCODER: Vocoder Mode : Transpose : Pitch Bend : Portamento Rate : Style Name PITCH CORRECT: Transpose : Pitch Bend : Portamento Rate : Style Name 29

When you are satisfied, press Store once or Exit twice to save your changes. See Storing Your Edits at the end of this chapter for more details on saving.

Level 3: Customizing A Harmony
Customizing allows you to determine exactly which notes are produced for any given input note. It is the deepest harmony editing level and it is only available with Chordal, Scalic and Chromatic harmony types. Examples of customized harmonies are the Blu1, Blu2 and Blu3 harmony styles shown in the Blues Third Above program. All three styles are based on a major Scalic harmony that has been edited so that certain input notes produce different harmonies from those in the strict definition of a Major scale. Once you have customized a harmony, the Voicing edit screen disappears and is replaced by the Customize Voicing screens. The Customize Voicing screens work differently in that you have all twelve notes of the scale to apply to input notes where you previously could choose only the notes within a major or minor scale for Scalics and notes from a particular chord in Chordal harmonies. The Custom Harmonies screens are as follows:

Custom Voicing
You have a range of twelve input notes within one octave to assign alternative harmony voicings to. You can, however, choose any of the notes within a four octave range to apply to the input notes in your octave. You also have the option of inserting a no change shown by n/c in the Custom Voicing screen. This is a way of handling non-scale or nonchord notes gracefully and to control harmony motion. Instead of assigning a particular note, you can assign a no change which locks the harmony note on the previous one regardless of whether it was higher or lower. In fact, no change forms the basis for the Chordal harmony concept where the harmony notes are confined to two or three notes per octave for any of twelve input notes.

Custom Harmony Key
You must tell the Vocalist Workstation EX what key your input notes are referenced to before you begin customizing. The default key from the factory is C but you can change it to any of the 12 keys.

To make your own custom harmony:
1. Select a program with harmony styles close to what you want and press the Edit button. Press the softkey that corresponds to Harmony. Select the harmony style closest to what you want. Press the Edit button.

30

Note: If you want to reference your harmonies to any other key than C, press the Right Arrow button to present the Custom Harmony Key reference setting screen. Use the Data Wheel to change to the new key.

4.

Press the Left Arrow button twice to locate the [Edit] to Customize screen. [. . . ] Depending on the chord changes in the accompaniment, the tight and always moving Scalic harmonies might be better for a catchy chorus where the more stationary and open Chordal harmonies would leave breathing space to highlight a lead vocal. It is important to assess these for yourself by experimenting with both types in all of the styles of music you are involved with.

59

SPECIFICATIONS
Microphone Input Line Input Microphone Input Range Line Input Range Line Outputs Balanced XLR, 1 KOhm impedance, cardoid (directional) type preferred Balanced or unbalanced 1/4″ TRS, +4/-10 dB level (switchable), 2. 2 KOhm impedance @ 150 Ohm source impedance: minimum -42. 1 dBu, maximum -3. 2 dBu Balanced input @ 50 Ohm source impedance: maximum +18. 0 dBu Balanced or unbalanced 1/4″ TRS, stereo or mono, +4 dBu (can be reduced by trimming Output Level fader) Maximum output level +16 dBu Sampling Frequency Response (dry) Signal to Noise Total Harmonic Distortion + Noise Power Requirements A/D: 18 bit @ 48 KHz 15 Hz to 20 KHz, +0/-1 dB >92 dB A weighted 0. 032% Input voltage = 9. 75 VDC Input current = 820 mA Use only Harmon Pro Group PS750 adaptor or exact equivalent Size 6. 6″ H x 10. 5″ W x 1. 7″ D 167 mm H x 267 mm W x 43 mm D Weight 1. 5 lb. . 7 kg.

Internal Lithium Battery

Sony CR2032 Note: The lithium battery in the Vocalist Workstation EX keeps a portion of the memory powered to retain user settings. If you find that user programs or songs cannot be stored, or are lost when the Workstation is turned off, this may be due to a dead battery. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DIGITECH VOCALISTWEX

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner’s manual, quick start guide, technical datasheets…
In any way can’t Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on «Download the user manual» at the end of this Contract if you accept its terms, the downloading of the manual DIGITECH VOCALISTWEX will begin.

Copyright © 2015 — LastManuals —
All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag

Понравилась статья? Поделить с друзьями:

Это тоже интересно:

  • Dolphin средство для промывания носа инструкция
  • Dex forte инструкция по применению на русском языке
  • Dolirhume инструкция по применению на русском
  • Dolce gusto mini me инструкция по применению
  • Dolby ims2000 инструкция на русском

  • Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии