Denon avr 3802 инструкция на русском - Инструкции, руководства, мануалы

AVR-3802

PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER

OUTPUT

SIGNAL

DETECT

SURROUND

BACK CH

TUNING

PRESET

REC /

MULTI

6.1 / 7.1

SURROUND

SOURCE

ON / STANDBY

REMOTE
SENSOR

FUNCTION

SURROUND

SPEAKER

AUTO

PCM

DTS

SIGNAL

DIGITAL

INPUT

VOLUME LEVEL

MASTER VOLUME

SURROUND

MODE

SURROUND

PARAMETER

TONE

CONTROL

SELECT

CH VOL

DIMMER

STATUS

TONE DEFEAT

VIDEO SELECT

INPUT

EXT. IN

ANALOG

AUTO

PCM

DTS

PHONES

ON / STANDBY

+10

TV/

VCR

OFF

CDR/MD/ TAPE RECEIVER

VCR

DBS/CABLE

SKIP

ENTER

MEMORY

VOLUME

CHANNEL

—

VDP

DVD

POWER

REMOTE CONTROL UNIT

RC-883

ON /

SOURCE

TUNER

VDP

VCR-1

VCR-2 /V.AUX

DVD

TV/DBS

CDR/ TAPE

PHONO

SURROUND

INPUT

OUTPUT

TEST

TONE

SPEAKER

6.1 / 7.1

SURROUND

5CH / 7CH

ANALOG

EXT.IN

MODE

CALL 2

BACKLIGHT

CALL 1

STEREO

DOLBY/DTS
SURROUND

DSP
SIMU.

DISPLAY

SYSTEM CALL

DIRECT

RETURN

SETUP

SHIFT

SURR.

PARA.

OSD

A/B

MUTING

BAND

MODE

TUNING

AV SURROUND RECEIVER

AVR-3802

OPERATING INSTRUCTIONS

We greatly appreciate your purchase of the AVR-3802.

To be sure you take maximum advantage of all the features the AVR-3802 has to offer, read these instructions
carefully and use the set properly. Be sure to keep this manual for future reference, should any questions or
problems arise.

“SERIAL NO.

PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE
CABINET FOR FUTURE REFERENCE”

Источник

Page 1: Denon AVR-3802

AVR-3802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.1 / 7.1 SURROUND SOURCE ON / STANDBY REMOTE SENSOR FUNCTION SURROUND SPEAKER A B AUTO PCM DTS SIGNAL DIGITAL INPUT VOLUME LEVEL MASTER VOLUME SURROUND MODE SURROUND PARAMETER TONE CONTROL SELECT CH VOL DIMMER STATUS TONE DEFEA[…]
Page 2: Denon AVR-3802

2 2 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence […]
Page 3: Denon AVR-3802

3 SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.[…]
Page 4: Denon AVR-3802

4 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON Digital Surround A / V receiver . This remarkable component has been engineered to provide supe rb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided wit[…]
Page 5: Denon AVR-3802

5 3 CAUTIONS ON HANDLING 4 FEA TURES • Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PRE OUT jacks, H[…]
Page 6: Denon AVR-3802

6 R L R L R INPUT OUTPUT LR L R OUTPUT L R L INPUT OPTICAL COAXIAL OUTPUT OPTICAL L R L R L R L R OUTPUT DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO B B 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). ?[…]
Page 7: Denon AVR-3802

7 IN VIDEO R L R OUT IN AUDIO VIDEO OUT IN LRL R L R L R OUT IN AUDIO VIDEO OUT IN LRL R L R L R OUT VIDEO OUT L AUDIO L R R OUT VIDEO OUT L AUDIO L R R L R L R L R L RL B B Connecting video components • T o connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in video qualit[…]
Page 8: Denon AVR-3802

8 IN S-VIDEO OUT S-VIDEO OUT S-VIDEO OUT IN S-VIDEO OUT IN S-VIDEO B B Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other . […]
Page 9: Denon AVR-3802

9 Y C R C B VIDEO OUT Y C R C B COMPONENT VIDEO IN COMPONENT B Connecting a Video Component Equipped with Color Difference (Component — Y , P R /C R , P B /C B ) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jack[…]
Page 10: Denon AVR-3802

10 14mm 9mm 14mm 19mm 5mm 5mm 5C-2V 3C-2V 1 4 2 3 Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA 300 Ω /ohms FEEDER CABLE FM INDOOR ANTENNA (Supplied) 300 Ω /ohms AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND AM loop antenna assembly FM antenna adapter assembly Connect to the AM[…]
Page 11: Denon AVR-3802

11 R L B L R L R RL Connecting the external input (EXT . IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder , or a component with a different type of multi-channel decoder , such as a Super Audio DVD player , or a multi-channel SACD player , or other future multi-channel sound format decoder . • When […]
Page 12: Denon AVR-3802

12 ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) Speaker system connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( ≈ with ≈ , √ with √ ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the[…]
Page 13: Denon AVR-3802

13 • This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high ou[…]
Page 14: Denon AVR-3802

14 6 P ART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). AVR-3802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.1 / 7.1 SURROUND SOURCE ON / STANDBY REMOTE SENSOR FUNCTION SURROUND SPEAKER A B AUTO PCM[…]
Page 15: Denon AVR-3802

15 1 2 3 45 6 789 +1 0 0 TV/ VCR OFF TV CD CDR/MD / TAPE RECEIVER VCR DBS/ CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2 / V.AUX DVD TV/DBS CDR/ TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLIGHT CALL […]
Page 16: Denon AVR-3802

16 SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — TUNER PH O N O CD DISPLAY RETURN SETUP MENU SHIFT SURR. PARA. OSD A/B MUTING BAND MODE TUNING TUNING 7 SETTING UP THE SYSTEM • Once all connections with other A V components have been completed as described in “ CONNECTIONS ” (see pages 6 to 13), make the various settings described below on the[…]
Page 17: Denon AVR-3802

17 • Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor: With the A VR-3802 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and surround modes. Subwoofer Center s[…]
Page 18: Denon AVR-3802

18 Before setting up the system 1 2 Check that all the connections are correct, then turn on the main unit ’ s power . SETUP Display the System Setup Menu. Make this setting to switch the power amplifier for the surround back channel to Multi. 1 At the System Setup Menu, select “ Power Amp Assignment ” and press the ENTER button BAND MODE TUN[…]
Page 19: Denon AVR-3802

19 2 3 ENTER SHIFT BAND MODE TUNING TUNING BAND MODE TUNING TUNING Switch to the speaker configuration screen. Set whether or not speakers are connected and, if so, their size parameters. • T o select the speaker • T o select the parameter 4 ENTER SHIFT Press the ENTER button to finalize the setting. NOTE: • Select “ Large ” or “ Small […]
Page 20: Denon AVR-3802

20 2 ENTER SHIFT Enter the setting. When “ Front ” is set to “ Large ” and “ Subwoofer ” is set to “ Ye s ” , the set switches to the subwoofer mode. Speaker type setting when using both surround speakers A and B If “ Small ” is set for either surround speakers A or B, the output is the same as when “ Small ” is set for both[…]
Page 21: Denon AVR-3802

21 Setting the SB CH Auto Flag Detect Set the operation for the digital signals when playing in the 6.1 SURROUND and DTS-ES surround modes. 1 At the System Setup Menu select “ SB CH Auto Flag Detect ” and press the ENTER button. ENTER SHIFT BAND MODE TUNING TUNING 2 Select the desired setting. We recommend setting this to “ OFF ” . When set[…]
Page 22: Denon AVR-3802

22 Setting the delay time 1 BAND MODE TUNING TUNING At the System Setup Menu select “ Delay T ime ” . • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. • The delay time can be set separately for surround speakers A and B. Preparations: Measure the distances between th[…]
Page 23: Denon AVR-3802

23 6 BAND MODE TUNING TUNING Set the distance between the center speaker and listening position. The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest to the measured distance. If “ Ye s ” is selected for “ Default ” , the settings are automatically reset to the default values. Please[…]
Page 24: Denon AVR-3802

24 4 5 BAND MODE TUNING TUNING BAND MODE TUNING TUNING BAND MODE TUNING TUNING Select the mode. Select “ Auto ” or “ Manual ” . • Auto: Adjust the level while listening to the test tones produced automatically from the different speakers. • Manual: Select the speaker from which you want to produce the test tone to adjust the level. Sele[…]
Page 25: Denon AVR-3802

25 9 ENTER SHIFT After the above settings are completed, press the ENTER button. The “ Channel Level ” screen reappears. T o cancel the settings, select “ Level Clear ” and “ Ye s ” on the “ Channel Level ” screen, then make the settings again. The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a […]
Page 26: Denon AVR-3802

26 Setting the multi vol. level Set the multi pre-out output level adjustment. 1 BAND MODE TUNING TUNING At the “ System Setup Menu ” screen, select “ Multi V ol. Level ” and press the ENTER button. 2 3 BAND MODE TUNING TUNING ENTER SHIFT Enter the setting. The “ System Setup Menu ” reappears. Select the desired settimg. 0 dB, -40 dB: T[…]
Page 27: Denon AVR-3802

27 4 ENTER SHIFT Enter the setting. The System Setup Menu reappears. BAND MODE TUNING TUNING Auto tuner presets Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 to 8. NOTE: • If an FM station cannot be preset automatically due to poor reception, use the “[…]
Page 28: Denon AVR-3802

28 After completing system setup This button can be pressed at any time during the system setup process to complete the process. SETUP 1 At the System Setup Menu, press the SYSTEM SETUP button. The changed settings are entered and the on-screen display turns off. • On-screen display signals Signals input to the A VR-3802 VIDEO signal input jack ([…]
Page 29: Denon AVR-3802

29 8 REMOTE CONTROL UNIT • The included remote control unit (RC-883) can be used to operate not only the A VR-3802 but other remote control compatible DENO N components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-Denon remote control compatible products. Inserting […]
Page 30: Denon AVR-3802

30 Operating DENON audio components 1 2 Use the mode selector buttons to select the component you want to operate. The mode switches between “ AMP ” , “ TUNER ” and “ MUL TI ” each time the RECEIVER button is pressed, between “ CDR ” , “ MD ” and “ T APE ” each time the CDR/MD/T APE button is pressed, between “ DBS ” and[…]
Page 31: Denon AVR-3802

31 Preset memory 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLI[…]
Page 32: Denon AVR-3802

32 Checking the preset memory settings 1 2 3 ON / SOURCE OFF ENTER SHIFT BAND MODE TUNING TUNING ENTER SHIFT Press the power ON/SOURCE button and the OFF button at the same time. •“ SET UP ” appears on the remote control unit ’ s display . Press the ENTER button. Use the D and H cursor buttons to display “ CODE NO ” on the remote contro[…]
Page 33: Denon AVR-3802

33 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2 /V.AUX DVD TV/DBS CDR/ TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLIGHT CALL 1 ST[…]
Page 34: Denon AVR-3802

34 Learning function If your A V component is not a Denon product or if it cannot be operated using the preset memory , it can be controlled with the included remote control unit by storing its remote control signals in the remote control unit. 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME […]
Page 35: Denon AVR-3802

35 System call (1) System call buttons The buttons that can be used for the system call function are shown on the diagram at the right. System call signals can be stored at different buttons according to the mode. System call signals can be stored at a maximum of 6 buttons other than the CALL 1 and CALL 2 buttons. 29 successive operations can be se[…]
Page 36: Denon AVR-3802

36 5 6 Use the D and H cursor buttons to select the mode for the button at which the system call signals are to be registered, then press the ENTER button. “ SELECT KEY ” is displayed. Press the button at which the system call signals are to be registered, then press the ENTER button. •“ ENTER KEYS ” is displayed, then the mode display ap[…]
Page 37: Denon AVR-3802

37 4 Use the D and H cursor buttons to display “ RESET SYS ” on the remote control unit, then press the ENTER button. •“ SYS SEL ” appears on the remote control unit ’ s display . The remote control unit ’ s display switches as shown below each time the D and H cursor buttons are pressed. q T o reset CALL 1 or CALL 2, select “ SYS C[…]
Page 38: Denon AVR-3802

38 4 5 6 7 BAND MODE TUNING TUNING ENTER SHIFT BAND MODE TUNING TUNING ENTER SHIFT ENTER SHIFT Use the D and H cursor buttons to display “ RESET PRE ” on the remote control unit, then press the ENTER button. • After “ SEL PRE ” is displayed on the remote control unit ’ s display , the registered preset memory is displayed on the remote […]
Page 39: Denon AVR-3802

39 • This function is for resetting all the settings to the factory defaults. 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKE[…]
Page 40: Denon AVR-3802

40 Auto search function • The set is equipped with a function for searching for the registration number if you do not know the preset code (a 4-digit number) when setting the preset memory . 1 2 For TV , DBS or CABLE components, turn on the component ’ s power . For CD, MD, T APE, DVD, VCR and VDP component ’ s, turn on the component ’ s po[…]
Page 41: Denon AVR-3802

41 9 OPERA TION Before operating 1 Refer to “ CONNECTIONS ” (pages 6 to 13) and check that all connections are correct. 2 Select “ AMP ” using the RECEIVER button. (only when operating with the remote control unit) 3 T urn on the power . Press the POWER switch (button). RECEIVER ON / STANDBY (Main unit) (Remote control unit) Light B 3 ON / […]
Page 42: Denon AVR-3802

42 B 15 2 3 Playing the input source 1 Select the input source to be played. FUNCTION Example: CD 3 CD (Main unit) (Remote control unit) T o select the input source when REC MUL TI OUT or TUNING PRESET is selected, press the SOURCE button then operate the input function selector . 2 Select the input mode. • Selecting the analog mode Press the ANA[…]
Page 43: Denon AVR-3802

43 SIGNAL DIGITAL DIGITAL DIGITAL SIGNAL SIGNAL ANALOG DIGIT AL DIGIT AL DIGIT AL ANALOG AUTO INPUT PCM DTS AUTO INPUT PCM DTS AUTO INPUT PCM DTS AUTO INPUT PCM DTS PCM • Selecting the PCM mode Press the PCM button to switch to the PCM signal input. DTS • Selecting the DTS mode Press the DTS button to switch to the DTS signal input. 3 Example: […]
Page 44: Denon AVR-3802

44 Playback using the external input (EXT . IN) jacks 1 Set the external input (EXT . IN) mode. Press the EXT . IN to switch the external input. EXT.IN EXT.IN (Main unit) (Remote control unit) Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left), SR (surround right), SBL (surrou[…]
Page 45: Denon AVR-3802

45 After starting playback [1] Adjusting the sound quality (TONE) The tone control function will not work in the direct mode. 1 The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL (Main unit) 2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level. SELECT NOTE: T o prevent […]
Page 46: Denon AVR-3802

46 Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/MUL TI button. REC / MULTI 2 With “ RECOUT SOURCE ” displayed, turn the FUNCTION knob to select the source you wish to record. • The “ REC ” indicator and the indicator of the selected source light. FUNCTION 3 Set the recording[…]
Page 47: Denon AVR-3802

47 [3] Remote control unit operations during multi-source playback (selecting the input source) This operation is possible when Multi mode is selected. This operation is not possible in the REC OUT mode. 1 Select “ MUL TI ” using the RECEIVER button. (Remote control unit) 2 Press the input source button. The multi source switches directly . [4][…]
Page 48: Denon AVR-3802

48 RC-617 AVR-3802 RC-616 B 2 MUL TI ZONE MUSIC ENTERT AINMENT SYSTEM (When using SPEAKER OUT) ANOTHER ROOM MAIN ROOM PROGRAMMABLE REMOTE CONTROL UNIT SYSTEM REMOTE CONTROL UNIT RC-883 ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line MUL TI SOURCE SPEAKER cable SPEAKER cable * Refer to CONNECTIONS on pages 6 to 13. RC-617 AVR-3802 […]
Page 49: Denon AVR-3802

49 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 23) or from the remote control unit, as described below . • Adjusting with the remote contr[…]
Page 50: Denon AVR-3802

50 Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together . Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 Select “ FADER ” . CH VOL ENTER SHIFT (Main unit) (Rem[…]
Page 51: Denon AVR-3802

51 NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3CH. LOGIC). The A VR-3802 sets the mode automatically according to the types of speakers set during the system setup process (page 18). 3 Set the surround parameter mode. SURROUND PARAMETER SURR. PARA. (Main unit) (Remote control unit) MODE CINEMA Display The on-[…]
Page 52: Denon AVR-3802

52 Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input) 1 Select the input source. Playback with a digital input q Select an input source set to digital (COAXIAL/OPTICAL) (see page 25). FUNCTION 5 VDP (Main unit) (Remote control unit) w Set the input mode to “ AUTO ” or “ DTS ” . AUTO DTS MODE (Main u[…]
Page 53: Denon AVR-3802

53 4 Display the surround parameter menu. SURR. PARA. (Remote control unit) SURROUND PARAMETER (Main unit) 5 Select the various parameters. SURROUND PARAMETER 6 BAND MODE TUNING TUNING (Remote control unit) (Main unit) SELECT BAND MODE TUNING TUNING (Remote control unit) (Main unit) Adjust the parameter settings. Surround parameters w CINEMA EQ. (C[…]
Page 54: Denon AVR-3802

54 11 DSP SURROUND SIMULA TION • The A VR-3802 is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of seven preset surround modes can be selected according to the program source and the parameters can be a djusted according to the conditions in the […]
Page 55: Denon AVR-3802

55 DSP surround simulation 1 Select the surround mode for the input channel. • T o operate the surround mode and surround parameters from the remote control unit. The surround mode switches in the following order each time the DSP SIMULA TION button is pressed: SURROUND 6.1 / 7.1 SURROUND 5CH / 7CH STEREO STEREO DOLBY/DTS SURROUND DSP SIMU. DIREC[…]
Page 56: Denon AVR-3802

56 • Operating the surround mode and surround parameters from the main unit ‘ s panel. 1 T urn the SELECT knob to select the surround mode. SELECT • When turned clockwise • When turned counterclockwise 2 Press the SURROUND P ARAMETER button. Press and hold in the surround parameter button to select the parameter you want to set. • The par[…]
Page 57: Denon AVR-3802

57 T one control setting • Use the tone control setting to adjust the bass and treble as desired. • T o operate the tone control from the remote control unit. 1 Display the surround parameter screen on the monitor . The screen for the selected surround mode appears. “ TONE ” cannot be selected in the Direct mode. SURR. PARA. 1 2 3 45 6 789 […]
Page 58: Denon AVR-3802

58 Surround parameters e MODE: (DTS NEO:6) • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-p[…]
Page 59: Denon AVR-3802

C C E E E E C C C C C C C C 59 2 Surround modes and parameters C : Signal E : No signal B : T urned on or off by speaker configuration setting C : Adjustable E : Not adjustable C : Able E : Unable Channel output FRONT L/R CENTER SURROUND L/R SUB- WOOFER SURROUND BACK L/R DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC II DTS NEO:6 DOLBY DIGIT AL (6.1 […]
Page 60: Denon AVR-3802

60 12 LISTENING TO THE RADIO If tuning does not stop at the desired station, use to the “ Manual tuning ” operation. 1 Set the input function to “ TUNER ” . FUNCTION 3 Watching the display , press the BAND button to select the desired band (AM or FM). BAND MODE TUNING TUNING 4 Press the MODE button to set the auto tuning mode. BAND MODE TUN[…]
Page 61: Denon AVR-3802

61 Checking the preset stations 1 Use the “ Auto tuning ” or “ Manual tuning ” operation to tune in the station to be preset in the memory . 2 Press the MEMORY button. MEMORY RETURN A/B 3 ENTER SHIFT Press the SHIFT button and select the desired memory block (A to E). 4 SKIP SKIP CHANNEL + — Press the CHANNEL + (UP) or – (DOWN) button to […]
Page 62: Denon AVR-3802

62 Recalling preset stations • T o call out preset stations from the remote control unit. 1 Watching the display , press the SHIFT button to select the preset memory block. ENTER SHIFT SKIP SKIP CHANNEL + — (Remote control unit) 2 Watching the display , press the CHANNEL + (UP) or – (DOWN) button to select the desired preset channel. (Remote co[…]
Page 63: Denon AVR-3802

63 15 TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions ? 3. Are the speakers, turntable and other components operating proper ty ? If this unit is not operating properly , check the items listed in the table below . Should […]
Page 64: Denon AVR-3802

64 16 ADDITIONAL INFORMA TION Optimum surround sound for different sources There are currently various types of multi-channel signals (signals or formats with more than two channels). 2 T ypes of multi-channel signals Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio CD), MPE[…]
Page 65: Denon AVR-3802

65 Surround back speakers A 6.1-channel system is a conventional 5.1-channel system to which the “ surround back ” (SB) channel has been added. This makes it easy to achieve sound positioned directly behind the listener , something that was previously difficult with sources designed for conven tional multi surround speakers. In addition, the ac[…]
Page 66: Denon AVR-3802

66 • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears. • Same as surround back speaker installation method (1). Using dipolar speakers for the surround b[…]
Page 67: Denon AVR-3802

67 • Set the front speakers slightly wider apart than the setup for watching movies only and point them toward the listening position in order assure clear positioning of the sound. • Set the center speaker in the same positions as in example (1). • Set surround speakers A for watching movies in the positions described in example (1) or (2), […]
Page 68: Denon AVR-3802

68 Surround The A VR-3802 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to ac hieve the same sense of presence as in a movie theater . Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby D[…]
Page 69: Denon AVR-3802

69 DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems . DTS offers the same “ 5.1 ” playback channels as Dolby Digital (front left, front right and center , surround left and surround right) as well as the stereo 2-channel mode. The signals for the[…]
Page 70: Denon AVR-3802

70 DTS-ES Extended Surround TM DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expand[…]
Page 71: Denon AVR-3802

71 System setup items and default values (set upon shipment from the factory) System setup Default settings q w t y u i o Speaker Configuration Surround Speaker Setting Subwoofer mode SB CH Auto Flag Detect Channel Level Digital In Assignment On Screen Display Auto T uner Presets Input the combination of speakers in your system and their correspond[…]
Page 72: Denon AVR-3802

72 C : Adjustable E : Not adjustable Surround modes and parameters Parameter (default values are shown in parentheses) TONE CONTROL CINEMA EQ. ROOM SIZE EFFECT LEVEL DELA Y TIME When playing Dolby Digital/DTS signals D. COMP LFE DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC II DTS NEO:6 DOLBY DIGIT AL (6.1 SURROUND) DTS SURROUND (DTS ES MTRX 6.1) 5/[…]
Page 73: Denon AVR-3802

73 17 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Front: 110 W + 110 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) 150 W + 150 W (6 Ω /ohms, 1 kHz with 0.7% T .H.D.) Center: 110 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) 150 W (6 Ω /ohms, 1 kHz with 0.7% T .H.D.) Surround: 110 W + 110 W (8 Ω /ohms, 20 Hz ~ 2[…]
Page 74: Denon AVR-3802

14-14, AKASAKA 4-CHOME, MINA TO-KU, TOKYO 107-8011, JAP AN T elephone: (03) 3584-8111 Printed in Japan 511 3785 000[…]

Источник

Страница 1

AVR-3802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.1 / 7.1 SURROUND SOURCE ON / STANDBY REMOTE SENSOR FUNCTION SURROUND SPEAKER A B AUTO PCM DTS SIGNAL DIGITAL INPUT VOLUME LEVEL MASTER VOLUME SURROUND MODE SURROUND PARAMETER TONE CONTROL SELECT CH VOL DIMMER STATUS TONE DEFEA[…]
Страница 2

2 2 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence […]
Страница 3

3 SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.[…]
Страница 4

4 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON Digital Surround A / V receiver . This remarkable component has been engineered to provide supe rb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided wit[…]
Страница 5

5 3 CAUTIONS ON HANDLING 4 FEA TURES • Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PRE OUT jacks, H[…]
Страница 6

6 R L R L R INPUT OUTPUT LR L R OUTPUT L R L INPUT OPTICAL COAXIAL OUTPUT OPTICAL L R L R L R L R OUTPUT DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO B B 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). ?[…]
Страница 7

7 IN VIDEO R L R OUT IN AUDIO VIDEO OUT IN LRL R L R L R OUT IN AUDIO VIDEO OUT IN LRL R L R L R OUT VIDEO OUT L AUDIO L R R OUT VIDEO OUT L AUDIO L R R L R L R L R L RL B B Connecting video components • T o connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in video qualit[…]
Страница 8

8 IN S-VIDEO OUT S-VIDEO OUT S-VIDEO OUT IN S-VIDEO OUT IN S-VIDEO B B Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other . […]
Страница 9

9 Y C R C B VIDEO OUT Y C R C B COMPONENT VIDEO IN COMPONENT B Connecting a Video Component Equipped with Color Difference (Component — Y , P R /C R , P B /C B ) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jack[…]
Страница 10

10 14mm 9mm 14mm 19mm 5mm 5mm 5C-2V 3C-2V 1 4 2 3 Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA 300 Ω /ohms FEEDER CABLE FM INDOOR ANTENNA (Supplied) 300 Ω /ohms AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND AM loop antenna assembly FM antenna adapter assembly Connect to the AM[…]
Страница 11

11 R L B L R L R RL Connecting the external input (EXT . IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder , or a component with a different type of multi-channel decoder , such as a Super Audio DVD player , or a multi-channel SACD player , or other future multi-channel sound format decoder . • When […]
Страница 12

12 ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) Speaker system connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( ≈ with ≈ , √ with √ ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the[…]
Страница 13

13 • This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high ou[…]
Страница 14

14 6 P ART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). AVR-3802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.1 / 7.1 SURROUND SOURCE ON / STANDBY REMOTE SENSOR FUNCTION SURROUND SPEAKER A B AUTO PCM[…]
Страница 15

15 1 2 3 45 6 789 +1 0 0 TV/ VCR OFF TV CD CDR/MD / TAPE RECEIVER VCR DBS/ CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2 / V.AUX DVD TV/DBS CDR/ TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLIGHT CALL […]
Страница 16

16 SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — TUNER PH O N O CD DISPLAY RETURN SETUP MENU SHIFT SURR. PARA. OSD A/B MUTING BAND MODE TUNING TUNING 7 SETTING UP THE SYSTEM • Once all connections with other A V components have been completed as described in “ CONNECTIONS ” (see pages 6 to 13), make the various settings described below on the[…]
Страница 17

17 • Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor: With the A VR-3802 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and surround modes. Subwoofer Center s[…]
Страница 18

18 Before setting up the system 1 2 Check that all the connections are correct, then turn on the main unit ’ s power . SETUP Display the System Setup Menu. Make this setting to switch the power amplifier for the surround back channel to Multi. 1 At the System Setup Menu, select “ Power Amp Assignment ” and press the ENTER button BAND MODE TUN[…]
Страница 19

19 2 3 ENTER SHIFT BAND MODE TUNING TUNING BAND MODE TUNING TUNING Switch to the speaker configuration screen. Set whether or not speakers are connected and, if so, their size parameters. • T o select the speaker • T o select the parameter 4 ENTER SHIFT Press the ENTER button to finalize the setting. NOTE: • Select “ Large ” or “ Small […]
Страница 20

20 2 ENTER SHIFT Enter the setting. When “ Front ” is set to “ Large ” and “ Subwoofer ” is set to “ Ye s ” , the set switches to the subwoofer mode. Speaker type setting when using both surround speakers A and B If “ Small ” is set for either surround speakers A or B, the output is the same as when “ Small ” is set for both[…]
Страница 21

21 Setting the SB CH Auto Flag Detect Set the operation for the digital signals when playing in the 6.1 SURROUND and DTS-ES surround modes. 1 At the System Setup Menu select “ SB CH Auto Flag Detect ” and press the ENTER button. ENTER SHIFT BAND MODE TUNING TUNING 2 Select the desired setting. We recommend setting this to “ OFF ” . When set[…]
Страница 22

22 Setting the delay time 1 BAND MODE TUNING TUNING At the System Setup Menu select “ Delay T ime ” . • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. • The delay time can be set separately for surround speakers A and B. Preparations: Measure the distances between th[…]
Страница 23

23 6 BAND MODE TUNING TUNING Set the distance between the center speaker and listening position. The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest to the measured distance. If “ Ye s ” is selected for “ Default ” , the settings are automatically reset to the default values. Please[…]
Страница 24

24 4 5 BAND MODE TUNING TUNING BAND MODE TUNING TUNING BAND MODE TUNING TUNING Select the mode. Select “ Auto ” or “ Manual ” . • Auto: Adjust the level while listening to the test tones produced automatically from the different speakers. • Manual: Select the speaker from which you want to produce the test tone to adjust the level. Sele[…]
Страница 25

25 9 ENTER SHIFT After the above settings are completed, press the ENTER button. The “ Channel Level ” screen reappears. T o cancel the settings, select “ Level Clear ” and “ Ye s ” on the “ Channel Level ” screen, then make the settings again. The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a […]
Страница 26

26 Setting the multi vol. level Set the multi pre-out output level adjustment. 1 BAND MODE TUNING TUNING At the “ System Setup Menu ” screen, select “ Multi V ol. Level ” and press the ENTER button. 2 3 BAND MODE TUNING TUNING ENTER SHIFT Enter the setting. The “ System Setup Menu ” reappears. Select the desired settimg. 0 dB, -40 dB: T[…]
Страница 27

27 4 ENTER SHIFT Enter the setting. The System Setup Menu reappears. BAND MODE TUNING TUNING Auto tuner presets Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 to 8. NOTE: • If an FM station cannot be preset automatically due to poor reception, use the “[…]
Страница 28

28 After completing system setup This button can be pressed at any time during the system setup process to complete the process. SETUP 1 At the System Setup Menu, press the SYSTEM SETUP button. The changed settings are entered and the on-screen display turns off. • On-screen display signals Signals input to the A VR-3802 VIDEO signal input jack ([…]
Страница 29

29 8 REMOTE CONTROL UNIT • The included remote control unit (RC-883) can be used to operate not only the A VR-3802 but other remote control compatible DENO N components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-Denon remote control compatible products. Inserting […]
Страница 30

30 Operating DENON audio components 1 2 Use the mode selector buttons to select the component you want to operate. The mode switches between “ AMP ” , “ TUNER ” and “ MUL TI ” each time the RECEIVER button is pressed, between “ CDR ” , “ MD ” and “ T APE ” each time the CDR/MD/T APE button is pressed, between “ DBS ” and[…]
Страница 31

31 Preset memory 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLI[…]
Страница 32

32 Checking the preset memory settings 1 2 3 ON / SOURCE OFF ENTER SHIFT BAND MODE TUNING TUNING ENTER SHIFT Press the power ON/SOURCE button and the OFF button at the same time. •“ SET UP ” appears on the remote control unit ’ s display . Press the ENTER button. Use the D and H cursor buttons to display “ CODE NO ” on the remote contro[…]
Страница 33

33 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2 /V.AUX DVD TV/DBS CDR/ TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLIGHT CALL 1 ST[…]
Страница 34

34 Learning function If your A V component is not a Denon product or if it cannot be operated using the preset memory , it can be controlled with the included remote control unit by storing its remote control signals in the remote control unit. 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME […]
Страница 35

35 System call (1) System call buttons The buttons that can be used for the system call function are shown on the diagram at the right. System call signals can be stored at different buttons according to the mode. System call signals can be stored at a maximum of 6 buttons other than the CALL 1 and CALL 2 buttons. 29 successive operations can be se[…]
Страница 36

36 5 6 Use the D and H cursor buttons to select the mode for the button at which the system call signals are to be registered, then press the ENTER button. “ SELECT KEY ” is displayed. Press the button at which the system call signals are to be registered, then press the ENTER button. •“ ENTER KEYS ” is displayed, then the mode display ap[…]
Страница 37

37 4 Use the D and H cursor buttons to display “ RESET SYS ” on the remote control unit, then press the ENTER button. •“ SYS SEL ” appears on the remote control unit ’ s display . The remote control unit ’ s display switches as shown below each time the D and H cursor buttons are pressed. q T o reset CALL 1 or CALL 2, select “ SYS C[…]
Страница 38

38 4 5 6 7 BAND MODE TUNING TUNING ENTER SHIFT BAND MODE TUNING TUNING ENTER SHIFT ENTER SHIFT Use the D and H cursor buttons to display “ RESET PRE ” on the remote control unit, then press the ENTER button. • After “ SEL PRE ” is displayed on the remote control unit ’ s display , the registered preset memory is displayed on the remote […]
Страница 39

39 • This function is for resetting all the settings to the factory defaults. 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-883 ON / SOURCE TUNER VDP VCR-1 VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKE[…]
Страница 40

40 Auto search function • The set is equipped with a function for searching for the registration number if you do not know the preset code (a 4-digit number) when setting the preset memory . 1 2 For TV , DBS or CABLE components, turn on the component ’ s power . For CD, MD, T APE, DVD, VCR and VDP component ’ s, turn on the component ’ s po[…]
Страница 41

41 9 OPERA TION Before operating 1 Refer to “ CONNECTIONS ” (pages 6 to 13) and check that all connections are correct. 2 Select “ AMP ” using the RECEIVER button. (only when operating with the remote control unit) 3 T urn on the power . Press the POWER switch (button). RECEIVER ON / STANDBY (Main unit) (Remote control unit) Light B 3 ON / […]
Страница 42

42 B 15 2 3 Playing the input source 1 Select the input source to be played. FUNCTION Example: CD 3 CD (Main unit) (Remote control unit) T o select the input source when REC MUL TI OUT or TUNING PRESET is selected, press the SOURCE button then operate the input function selector . 2 Select the input mode. • Selecting the analog mode Press the ANA[…]
Страница 43

43 SIGNAL DIGITAL DIGITAL DIGITAL SIGNAL SIGNAL ANALOG DIGIT AL DIGIT AL DIGIT AL ANALOG AUTO INPUT PCM DTS AUTO INPUT PCM DTS AUTO INPUT PCM DTS AUTO INPUT PCM DTS PCM • Selecting the PCM mode Press the PCM button to switch to the PCM signal input. DTS • Selecting the DTS mode Press the DTS button to switch to the DTS signal input. 3 Example: […]
Страница 44

44 Playback using the external input (EXT . IN) jacks 1 Set the external input (EXT . IN) mode. Press the EXT . IN to switch the external input. EXT.IN EXT.IN (Main unit) (Remote control unit) Once this is selected, the input signals connected to the FL (front left), FR (front right), C (center), SL (surround left), SR (surround right), SBL (surrou[…]
Страница 45

45 After starting playback [1] Adjusting the sound quality (TONE) The tone control function will not work in the direct mode. 1 The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL (Main unit) 2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level. SELECT NOTE: T o prevent […]
Страница 46

46 Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/MUL TI button. REC / MULTI 2 With “ RECOUT SOURCE ” displayed, turn the FUNCTION knob to select the source you wish to record. • The “ REC ” indicator and the indicator of the selected source light. FUNCTION 3 Set the recording[…]
Страница 47

47 [3] Remote control unit operations during multi-source playback (selecting the input source) This operation is possible when Multi mode is selected. This operation is not possible in the REC OUT mode. 1 Select “ MUL TI ” using the RECEIVER button. (Remote control unit) 2 Press the input source button. The multi source switches directly . [4][…]
Страница 48

48 RC-617 AVR-3802 RC-616 B 2 MUL TI ZONE MUSIC ENTERT AINMENT SYSTEM (When using SPEAKER OUT) ANOTHER ROOM MAIN ROOM PROGRAMMABLE REMOTE CONTROL UNIT SYSTEM REMOTE CONTROL UNIT RC-883 ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line MUL TI SOURCE SPEAKER cable SPEAKER cable * Refer to CONNECTIONS on pages 6 to 13. RC-617 AVR-3802 […]
Страница 49

49 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 23) or from the remote control unit, as described below . • Adjusting with the remote contr[…]
Страница 50

50 Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together . Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 Select “ FADER ” . CH VOL ENTER SHIFT (Main unit) (Rem[…]
Страница 51

51 NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3CH. LOGIC). The A VR-3802 sets the mode automatically according to the types of speakers set during the system setup process (page 18). 3 Set the surround parameter mode. SURROUND PARAMETER SURR. PARA. (Main unit) (Remote control unit) MODE CINEMA Display The on-[…]
Страница 52

52 Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input) 1 Select the input source. Playback with a digital input q Select an input source set to digital (COAXIAL/OPTICAL) (see page 25). FUNCTION 5 VDP (Main unit) (Remote control unit) w Set the input mode to “ AUTO ” or “ DTS ” . AUTO DTS MODE (Main u[…]
Страница 53

53 4 Display the surround parameter menu. SURR. PARA. (Remote control unit) SURROUND PARAMETER (Main unit) 5 Select the various parameters. SURROUND PARAMETER 6 BAND MODE TUNING TUNING (Remote control unit) (Main unit) SELECT BAND MODE TUNING TUNING (Remote control unit) (Main unit) Adjust the parameter settings. Surround parameters w CINEMA EQ. (C[…]
Страница 54

54 11 DSP SURROUND SIMULA TION • The A VR-3802 is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of seven preset surround modes can be selected according to the program source and the parameters can be a djusted according to the conditions in the […]
Страница 55

55 DSP surround simulation 1 Select the surround mode for the input channel. • T o operate the surround mode and surround parameters from the remote control unit. The surround mode switches in the following order each time the DSP SIMULA TION button is pressed: SURROUND 6.1 / 7.1 SURROUND 5CH / 7CH STEREO STEREO DOLBY/DTS SURROUND DSP SIMU. DIREC[…]
Страница 56

56 • Operating the surround mode and surround parameters from the main unit ‘ s panel. 1 T urn the SELECT knob to select the surround mode. SELECT • When turned clockwise • When turned counterclockwise 2 Press the SURROUND P ARAMETER button. Press and hold in the surround parameter button to select the parameter you want to set. • The par[…]
Страница 57

57 T one control setting • Use the tone control setting to adjust the bass and treble as desired. • T o operate the tone control from the remote control unit. 1 Display the surround parameter screen on the monitor . The screen for the selected surround mode appears. “ TONE ” cannot be selected in the Direct mode. SURR. PARA. 1 2 3 45 6 789 […]
Страница 58

58 Surround parameters e MODE: (DTS NEO:6) • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-p[…]
Страница 59

C C E E E E C C C C C C C C 59 2 Surround modes and parameters C : Signal E : No signal B : T urned on or off by speaker configuration setting C : Adjustable E : Not adjustable C : Able E : Unable Channel output FRONT L/R CENTER SURROUND L/R SUB- WOOFER SURROUND BACK L/R DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC II DTS NEO:6 DOLBY DIGIT AL (6.1 […]
Страница 60

60 12 LISTENING TO THE RADIO If tuning does not stop at the desired station, use to the “ Manual tuning ” operation. 1 Set the input function to “ TUNER ” . FUNCTION 3 Watching the display , press the BAND button to select the desired band (AM or FM). BAND MODE TUNING TUNING 4 Press the MODE button to set the auto tuning mode. BAND MODE TUN[…]
Страница 61

61 Checking the preset stations 1 Use the “ Auto tuning ” or “ Manual tuning ” operation to tune in the station to be preset in the memory . 2 Press the MEMORY button. MEMORY RETURN A/B 3 ENTER SHIFT Press the SHIFT button and select the desired memory block (A to E). 4 SKIP SKIP CHANNEL + — Press the CHANNEL + (UP) or – (DOWN) button to […]
Страница 62

62 Recalling preset stations • T o call out preset stations from the remote control unit. 1 Watching the display , press the SHIFT button to select the preset memory block. ENTER SHIFT SKIP SKIP CHANNEL + — (Remote control unit) 2 Watching the display , press the CHANNEL + (UP) or – (DOWN) button to select the desired preset channel. (Remote co[…]
Страница 63

63 15 TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions ? 3. Are the speakers, turntable and other components operating proper ty ? If this unit is not operating properly , check the items listed in the table below . Should […]
Страница 64

64 16 ADDITIONAL INFORMA TION Optimum surround sound for different sources There are currently various types of multi-channel signals (signals or formats with more than two channels). 2 T ypes of multi-channel signals Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio CD), MPE[…]
Страница 65

65 Surround back speakers A 6.1-channel system is a conventional 5.1-channel system to which the “ surround back ” (SB) channel has been added. This makes it easy to achieve sound positioned directly behind the listener , something that was previously difficult with sources designed for conven tional multi surround speakers. In addition, the ac[…]
Страница 66

66 • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears. • Same as surround back speaker installation method (1). Using dipolar speakers for the surround b[…]
Страница 67

67 • Set the front speakers slightly wider apart than the setup for watching movies only and point them toward the listening position in order assure clear positioning of the sound. • Set the center speaker in the same positions as in example (1). • Set surround speakers A for watching movies in the positions described in example (1) or (2), […]
Страница 68

68 Surround The A VR-3802 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to ac hieve the same sense of presence as in a movie theater . Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby D[…]
Страница 69

69 DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems . DTS offers the same “ 5.1 ” playback channels as Dolby Digital (front left, front right and center , surround left and surround right) as well as the stereo 2-channel mode. The signals for the[…]
Страница 70

70 DTS-ES Extended Surround TM DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to further expand[…]
Страница 71

71 System setup items and default values (set upon shipment from the factory) System setup Default settings q w t y u i o Speaker Configuration Surround Speaker Setting Subwoofer mode SB CH Auto Flag Detect Channel Level Digital In Assignment On Screen Display Auto T uner Presets Input the combination of speakers in your system and their correspond[…]
Страница 72

72 C : Adjustable E : Not adjustable Surround modes and parameters Parameter (default values are shown in parentheses) TONE CONTROL CINEMA EQ. ROOM SIZE EFFECT LEVEL DELA Y TIME When playing Dolby Digital/DTS signals D. COMP LFE DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC II DTS NEO:6 DOLBY DIGIT AL (6.1 SURROUND) DTS SURROUND (DTS ES MTRX 6.1) 5/[…]
Страница 73

73 17 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Front: 110 W + 110 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) 150 W + 150 W (6 Ω /ohms, 1 kHz with 0.7% T .H.D.) Center: 110 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) 150 W (6 Ω /ohms, 1 kHz with 0.7% T .H.D.) Surround: 110 W + 110 W (8 Ω /ohms, 20 Hz ~ 2[…]
Страница 74

14-14, AKASAKA 4-CHOME, MINA TO-KU, TOKYO 107-8011, JAP AN T elephone: (03) 3584-8111 Printed in Japan 511 3785 000[…]

Источник

Denon AVR 3802 — page 1

A V SURROUND RECEIVER A VR-3802 OPERA TING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI ISTRUZIONI PER L ’USO INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING ON / STANDBY ¢ OFF £ AVR-3802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.1 / 7.1 SURROUND SOURCE ON …
Denon AVR 3802 — page 2

2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dang …
Denon AVR 3802 — page 3

3 ENGLISH 2 We greatly appreciate your purchase of the A VR-3802. 2 T o be sure you take maximum advantage of all the features the A VR-3802 has to offer , read these instructions carefully and use the set properly . Be sure to keep this manual for future reference, should any questions or problems arise. “ SERIAL NO. PLEASE RECORD UNIT SERIAL NU …
Denon AVR 3802 — page 4

4 ENGLISH 4 FEA TURES 1. Digital Surround Sound Decoding Featuring 32 bit high speed DSP , operating entirely in digital domain, surround sound from digital sources such as DVD, LD, DTV and satellite are faithfully re-created. 2. Dolby Pro Logic II decoder Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improve …
Denon AVR 3802 — page 5

5 ENGLISH Connecting video components • T o connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in video quality . • When making connections, also refer to the operating instructions of the other components. IN VIDEO R L RO U T I N AUDIO VIDEO OUT IN LRL R L R L R OUT IN A …
Denon AVR 3802 — page 6

6 ENGLISH Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA 300 Ω /ohms FEEDER CABLE FM INDOOR ANTENNA (Supplied) 300 Ω /ohms AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND FM ANTENNA ADAPTER (Supplied) • An F-type FM antenna cable plug can be connected directly . • If the FM an …
Denon AVR 3802 — page 7

7 ENGLISH L R L R RL Decoder with 8- or 6-channel analog output Front Surround back Surround Subwoofer Center For instructions on playback using the external input (EXT . IN) jacks, see page 24. Connecting the external input (EXT . IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder , or a component with …
Denon AVR 3802 — page 8

8 ENGLISH Connections • When making connections, also refer to the operating instructions of the other components. ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) Connection jack for subwoofer with built-in amplifier (super woofer), etc. SURROUND SPEAKER SYSTEMS (A) CENTER SPEAKER SYSTEM FRONT SPEAKER SYSTEMS • Precautions when connecting speak …
Denon AVR 3802 — page 9

9 ENGLISH 1 2 3 45 6 789 +1 0 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER VDP VCR-1 RDS PTY RT VCR-2 / V.AUX DVD TV/DBS CDR/ TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 …
Denon AVR 3802 — page 10

10 ENGLISH NOTES: • The on-screen display signals are not output from the color difference (component) video signal (MONITOR OUT) jacks. • The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the A VR-3802 ’ s S-Video an …
Denon AVR 3802 — page 11

11 ENGLISH 2 Switch to the speaker configuration screen. ENTER SHIFT Center Sp. Front Sp. Subwoofer Surround Sp. A Surround back Sp. Surround Sp. B NOTE: • Select “ Large ” or “ Small ” not according to the actual size of the speaker but according to the speaker ’ s capacity for playing low frequency (bass sound below frequency set for …
Denon AVR 3802 — page 12

12 ENGLISH NOTES: — Assignment of low frequency signal range — • The only signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency signal range of channels set to “ Small ” in the setup menu. The low frequency signal range of channels set to “ Large ” are produ …
Denon AVR 3802 — page 13

13 ENGLISH 4 Once “ Meter ” or “ Feet ” is selected in Step 3, the Delay T ime screen appears automatically. 5 Select the speaker to be set. BAND MODE TUNING TUNING Example: When the distance is set to 3.6 m for the center speaker 6 Set the distance between the center speaker and listening position. The distance changes in units of 0.1 mete …
Denon AVR 3802 — page 14

14 ENGLISH Use the CURSOR buttons to adjust all the speakers to the same volume. The volume can be adjusted between – 12 dB and +12 dB in units of 1 dB. Example: When the volume is set to – 12 dB while the test tone is being produced from the subwoofer FL C FR SR SBR SBL SL SW SB 1spkr 2spkrs When the surround back speaker setting is set to “ …
Denon AVR 3802 — page 15

15 ENGLISH Set the multi pre-out output level adjustment. Setting the multi vol. level 1 At the “ System Setup Menu ” screen, select “ Multi V ol. Level ” and press the ENTER button. BAND MODE TUNING TUNING 2 Select the desired settimg. 0 dB, -40 dB: The output level is fixed at the set level and the volume can no longer be adjusted. V aria …
Denon AVR 3802 — page 16

16 ENGLISH This button can be pressed at any time during the system setup process to complete the process. After completing system setup 1 At the System Setup Menu, press the SYSTEM SETUP button. The changed settings are entered and the on-screen display turns off. SETUP • On-screen display signals 1 2 3 4 Signals input to the A VR-3802 On-screen …
Denon AVR 3802 — page 17

17 ENGLISH 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER VDP VCR-1 RDS PTY RT VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD DISPLAY RETURN SETUP MENU SHIFT SURR. PARA. OSD A/B MUTING BAND MODE TUNING TUNING 1 Operating D …
Denon AVR 3802 — page 18

18 ENGLISH Checking the preset memory settings 1 Press the power ON/SOURCE button and the OFF button at the same time. •“ SET UP ” appears on the remote control unit ’ s display. OFF ON / SOURCE 2 Press the ENTER button. ENTER SHIFT 3 Use the D and H cursor buttons to display “ CODE NO ” on the remote control unit, then press the ENTER …
Denon AVR 3802 — page 19

19 ENGLISH If your A V component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the included remote control unit by storing its remote control signals in the remote control unit. Learning function 1 Press the power ON/SOURCE button and the OFF button simultaneously . •“ SET UP ” appears o …
Denon AVR 3802 — page 20

20 ENGLISH 5 Use the D and H cursor buttons to select the mode for the button at which the system call signals are to be registered, then press the ENTER button. BAND MODE TUNING TUNING ENTER SHIFT 6 “ SELECT KEY ” is displayed. Press the button at which the system call signals are to be registered, then press the ENTER button. •“ ENTER KEY …
Denon AVR 3802 — page 21

21 ENGLISH 4 Use the D and H cursor buttons to display “ RESET PRE ” on the remote control unit, then press the ENTER button. • After “ SEL PRE ” is displayed on the remote control unit ’ s display, the registered preset memory is displayed on the remote control unit ’ s display. BAND MODE TUNING TUNING ENTER SHIFT 5 Use the D and H c …
Denon AVR 3802 — page 22

22 ENGLISH • The set is equipped with a function for searching for the registration number if you do not know the preset code (a 4-digit number) when setting the preset memory . Auto search function 2 Press the power ON/SOURCE button and the OFF button simultaneously . •“ SET UP ” appears on the remote control unit ’ s display. OFF ON / S …
Denon AVR 3802 — page 23

23 ENGLISH B 1 15 2 3 Playing the input source 1 2 3 45 6 789 +10 0 TV/ VCR SKIP SKIP ENTER VOLUME CHANNEL + — + — TUNER VDP VCR-1 RDS PTY RT VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLIGHT CALL 1 STEREO STEREO DOLBY/DTS SURROUND DSP SIMU. SYSTEM CALL …
Denon AVR 3802 — page 24

24 ENGLISH B 2 31 BASS TREBLE [1] Adjusting the sound quality (TONE) The tone control function will not work in the Direct mode. After starting playback 1 The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL (Main unit) 2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level …
Denon AVR 3802 — page 25

25 ENGLISH 1 Simulcast playback Use this switch to monitor a video source other than the audio source. Press the VIDEO SELECT button repeatedly until the desired source appears on the display . Cancelling simulcast playback. • Select “ SOURCE ” using the VIDEO SELECT button. • Switch the program source to the component connected to the vide …
Denon AVR 3802 — page 26

26 ENGLISH [3] Remote control unit operations during multi-source playback (selecting the input source) This operation is possible when Multi mode is selected. This operation is not possible in the REC OUT mode. 1 Select “ MUL TI ” using the RECEIVER button. RECEIVER (Remote Control unit) 2 Press the input source button. The multi source switch …
Denon AVR 3802 — page 27

27 ENGLISH 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 13) or from the remote control unit, as described below . • Adjusting with the remo …
Denon AVR 3802 — page 28

28 ENGLISH NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The A VR-3802 sets the mode automatically according to the types of speakers set during the system setup process (page 10). 3 Set the surround parameter mode. SURROUND PARAMETER (Main unit) SURR. PARA. (Remote control unit) MODE CINEMA Display T …
Denon AVR 3802 — page 29

29 ENGLISH 3 Play a program source with the , mark. 4 Display the surround parameter menu. DIGITAL • The DTS indicator lights when playing DTS sources. Light SIGNAL DETECT • The SIGNAL DETECT indictor lights when playing DTS-ES/6.1-channel surround sources containing the identification signal. • The Dolby Digital indicator lights when playing …
Denon AVR 3802 — page 30

30 ENGLISH 1 2 3 4 5 6 7 VIDEO GAME ROCK ARENA JAZZ CLUB MONO MOVIE (NOTE 1) MA TRIX WIDE SCREEN 5CH/7CH STEREO Use this to enjoy video game sources. Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions. This mode creates the sound field of a live house with a low ceiling and hard walls …
Denon AVR 3802 — page 31

31 ENGLISH T one control setting • Use the tone control setting to adjust the bass and treble as desired. • T o operate the tone control from the remote control unit. 1 Display the surround parameter screen on the monitor . The screen for the selected surround mode appears. “ TONE ” cannot be selected in the Direct mode. SURR. PARA. 1 2 3 4 …
Denon AVR 3802 — page 32

* 32 ENGLISH Surround parameters e MODE: (DTS NEO:6) • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, becaus …
Denon AVR 3802 — page 33

33 ENGLISH 12 LISTENING TO THE RADIO Auto tuning B 1 1 Set the input function to “ TUNER ” . FUNCTION (Main unit) 2 Press the RECEIVER button on the remote control unit to select “ TUNER ” . RECEIVER (Remote control unit) 3 Watching the display , press the BAND button to select the desired band (AM or FM). BAND MODE TUNING TUNING 1 TUNER (R …
Denon AVR 3802 — page 34

34 ENGLISH Recalling preset stations OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER PHONO CD DISPLAY RETURN SETUP MENU SHIFT SURR. PARA. OSD A/B MUTING BAND MODE TUNING TUNING 2 1 • T o call out preset stations from the remote control unit. 1 W …
Denon AVR 3802 — page 35

35 ENGLISH PTY search Use this function to find RDS stations broadcasting a designated program type (PTY). For a description of each program type, refer to “ Program T ype (PTY) ” . 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON …
Denon AVR 3802 — page 36

36 ENGLISH NOTES: • If step 3 does not work, start over from step 1. • If the microprocessor has been reset, all the button settings are reset to the default values (the values set upon shipment from the factory). B 1, 2 2 13 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting con …
Denon AVR 3802 — page 37

37 ENGLISH FL C SW FR FL C SW FR SL SR SB SL SR SB Multiple surround speakers Movie theater sound field Listening room sound field In this case it is important to achieve the same sense of expansion as in a movie theater with the surround channels. T o do so, in some cases the number of surround speakers is increased (to four or eight) or speakers …
Denon AVR 3802 — page 38

38 ENGLISH • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears. • Same as surround back speaker installation method (1). Using dipolar speakers for the su …
Denon AVR 3802 — page 39

39 ENGLISH 2 Dolby Digital and Dolby Pro Logic Comparison of home surround systems No. recorded channels (elements) No. playback channels Playback channels (max.) Audio processing High frequency playback limit of surround channel Dolby Digital 5.1 ch 5.1 ch L, R, C, SL, SR, SW Digital discrete processing Dolby Digital (AC-3) encoding/decoding 20 kH …
Denon AVR 3802 — page 40

40 ENGLISH Media CD LD (VDP) DVD Dolby Digital output jacks Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 3 Playback method (reference page) Set the input mode to “ AUTO ” or “ DTS ” (page 23). Never set the mode to “ ANALOG ? …
Denon AVR 3802 — page 41

41 ENGLISH System setup items and default values (set upon shipment from the factory) Surround modes and parameters System setup Default settings w e t y i Speaker Configuration (Surround Speaker Setting) (Subwoofer mode) SB CH Auto Flag Detect Channel Level Digital In Assignment On Screen Display Input the combination of speakers in your system an …
Denon AVR 3802 — page 42

42 ENGLISH 17 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Front: 105 W + 105 W ( 8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D. ) 150 W + 150 W ( 6 Ω /ohms, 1 kHz with 0.7% T .H.D. ) Center: 105 W ( 8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D. ) 150 W ( 6 Ω /ohms, 1 kHz with 0.7% T .H.D. ) Surround: 105 W + 105 W ( 8 Ω …
Denon AVR 3802 — page 43

ESP AÑOL 163 2 Agradecemos que haya comprado el equipo A VR-3802. 2 Para obtener el máximo rendimiento de todas las prestaciones que el A VR-3802 le ofrece, lea atentamente estas instrucciones y utilice el equipo de forma correcta. Conserve este manual para su consulta posterior , en caso de que surgieran dudas o problemas. “Nº DE SERIE P ARA …
Denon AVR 3802 — page 44

ESP AÑOL 164 R L R L R INPUT OUTPUT LRL R OUTPUT L R L INPUT OPTICAL COAXIAL OUTPUT OPTICAL L R L R L R L R OUTPUT DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO B B 4 CARACTER Í STICAS 1. Decodificaci ó n de sonido digital sur round (envolvente) Con un sistema de procesadores de alta velocidad DSP a 32 bit, operando enteramente en camp …
Denon AVR 3802 — page 45

ESP A Ñ OL 165 Conexi ó n de aparatos de video • Para conectar la se ñ al de video utilice un cable de se ñ al de video de 75 Ω /ohmios. El utilizar un cable no adecuado puede empeorar la calidad del video. • Al hacer las conexiones consulte tambi é n las instrucciones sobre los otros componentes. IN VIDEO R L RO U T I N AUDIO VIDEO OUT …
Denon AVR 3802 — page 46

ESP A Ñ OL 166 1 4 2 3 Conexi ó n de los terminales de antena DIRECCI Ó N DE EST ACI Ó N EMISORA CABLE COAXIAL DE 75 Ω /ohmios ANTENA DE FM 300 Ω /ohmios CABLE ALIMENT ADOR ANTENA ADAPT ADORA DE FM (Suministrado) 300 Ω /ohmios ANTENA AM DE CUADRO (Suministrado) ANTENA EXTERIOR DE AM TIERRA ANTENA ADAPT ADORA DE FM (Suministrado) • Una c …
Denon AVR 3802 — page 47

ESP A Ñ OL 167 L R L R RL Descodificador con salida anal ó gica para 8- o 6- canal. Frontal Surround posterior Surround Subwoofer Central V é anse en la p á gina 184 las instrucciones sobre reproducci ó n utilizando tomas de entrada externas (EXT . IN). Conexi ó n de las tomas de entrada exteriores (EXT . IN) • Estos conectores son para rec …
Denon AVR 3802 — page 48

ESP A Ñ OL 168 Conexiones • Al hacer las conexiones consulte las instrucciones de funcionamiento de los otros aparatos. ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) T oma de conexi ó n del altavoz de bajas frecuencias (subwoofer) con amplificador incorporado (super woofer), etc. SISTEMAS DE AL TA VOCES DE SONIDO ENVOL VENTE (A) SISTEMA DE AL …
Denon AVR 3802 — page 49

ESP A Ñ OL 169 1 2 3 45 6 789 +1 0 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER VDP VCR-1 RDS PTY RT VCR-2 / V.AUX DVD TV/DBS CDR/ TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE …
Denon AVR 3802 — page 50

ESP A Ñ OL 170 NOT AS: • Las se ñ ales de visualizaci ó n de “ on-screen “ no salen de los tomas del video componente de color (MONITOR OUT). • Las se ñ ales de visualizaci ó n en pantalla son salidas prioritarias de la toma S-VIDEO MONITOR OUT durante la reproducci ó n en un aparato de video. Por ejemplo, si el monitor de TV est á c …
Denon AVR 3802 — page 51

ESP A Ñ OL 171 2 Cambie a la pantalla de configuraci ó n de altavoces. ENTER SHIFT Center Sp. Front Sp. Subwoofer Surround Sp. A Surround back Sp. Surround Sp. B NOT A: • Seleccione “ Large ” o “ Small ” , no seg ú n el tama ñ o real del altavoz, sino seg ú n la capacidad del altavoz para reproducir se ñ ales de baja frecuencia (el …
Denon AVR 3802 — page 52

ESP A Ñ OL 172 NOT AS: — Asignaci ó n del margen de se ñ ales de baja frecuencia — • El canal del altavoz de frecuencias ultrabajas s ó lo produce se ñ ales LFE (durante la reproducci ó n de se ñ ales Dolby Digital o DTS) as í como el margen de se ñ ales de baja frecuencia de canales ajustados a “ Small ” en el men ú de configur …
Denon AVR 3802 — page 53

ESP A Ñ OL 173 Exemple: Lorsque “ Meters ” (M è tres) est s é lectionn é 3 Seleccione la unidad que se deseada, metros o pies. Seleccione (oscureci é ndolo) las unidades que se desean usar , “ Meters ” (metros) o “ Feet ” (pies). BAND MODE TUNING TUNING 4 Cuando se haya seleccionado “ Meters ” (metros) o “ Feet ” (pies) en …
Denon AVR 3802 — page 54

ESP A Ñ OL Utilice los botones CURSOR para ajustar todos los altavoces en el mismo volumen. El volumen puede ajustarse entre – 12 dB y +12 dB en unidades de 1 dB. Ejemplo: Cuando el volumen se sit ú a en – 12 dB, mientras el tono de prueba se est á emitiendo en el altavoz de frecuencias bajas (subwoofer). FL C FR SR SBR SBL SL SW SB 1spkr 2s …
Denon AVR 3802 — page 55

175 Fijar el ajuste del nivel m ú ltiple anterior a la salida. Ajuste del nivel multi vol. 1 En la pantalla “ System Setup Menu “ ( Men ú de Configuraci ó n del Sistema) seleccione “ Multi V ol. Level “ (Nivel Multi V ol.) y pulse el bot ó n ENTER. BAND MODE TUNING TUNING 2 Seleccione el ajuste deseado. 0 dB, -40 dB: El nivel de salida …
Denon AVR 3802 — page 56

ESP A Ñ OL 176 Este bot ó n puede pulsarse en cualquier momento durante el proceso de configuraci ó n del sistema para terminar el proceso. Despu é s de haber configurado el sistema 1 Pulse el bot ó n SYSTEM SETUP (configuraci ó n del sistema) en el men ú de configuraci ó n del sistema. Los ajustes modificados son ingresados y la visualizac …
Denon AVR 3802 — page 57

ESP A Ñ OL 177 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER VDP VCR-1 RDS PTY RT VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND OUTPUT TEST TONE SPEAKER 5CH / 7CH DOLBY/DTS DSP DISPLAY RETURN SETUP MENU SHIFT S …
Denon AVR 3802 — page 58

ESP A Ñ OL 178 Los c ó digos de preajuste a la salida de f á brica y despu é s de un reajuste son los siguientes: TV , VCR ……………………………………………………..HIT ACHI CD, MD, T APE, CDR, VDP , DVD, DVD SETUP ..DENON DBS …………………………………………………………..GENERAL INSTRUMENT CABLE …… …
Denon AVR 3802 — page 59

ESP A Ñ OL 179 Si su componente A V no es un producto Denon o si este no puede ser operado utilizando la memoria preajustada, este puede ser controlado con la unidad de mando a distancia mediante el almacenamiento de sus se ñ ales de mando a distancia en la unidad de mando a distancia. Funci ó n aprendizaje 1 Pulse simult á neamente el bot ó n …
Denon AVR 3802 — page 60

ESP A Ñ OL 180 5 Utilice los botones de cursor D y H para seleccionar el modo para el bot ó n en el cual las se ñ ales de llamada de sistema se van a registrar , luego pulse el bot ó n ENTER. BAND MODE TUNING TUNING ENTER SHIFT 6 Se visualiza “ SELECT KEY “ (seleccionar tecla). Pulse el bot ó n en el cual las se ñ ales de llamada de siste …
Denon AVR 3802 — page 61

ESP A Ñ OL 181 4 Utilice los botones de cursor D y H para visualizar “ RESET PRE “ en la unidad de mando a distancia y luego pulse el bot ó n ENTER. • Despu é s de que se visualiza “ SEL PRE “ en la pantalla de visualizaci ó n de la unidad de mando a distancia, la memoria preajustada registrada se visualiza all í tambi é n. BAND MOD …
Denon AVR 3802 — page 62

ESP A Ñ OL 182 • El conjunto est á equipado con una funci ó n de b ú squeda para el n ú mero de registro si usted no sabe el c ó digo de preajuste (un n ú mero de 4 d í gitos) cuando se configura la memoria preajustada. Funci ó n de b ú squeda autom á tica 2 Pulse el bot ó n de alimentaci ó n ON/SOURCE y el bot ó n OFF al mismo tiem …
Denon AVR 3802 — page 63

ESP A Ñ OL 183 B 1 15 2 3 Reproducci ó n de la fuente de entrada 1 2 3 45 6 789 +10 0 TV/ VCR SKIP SKIP ENTER VOLUME CHANNEL + — + — TUNER VDP VCR-1 RDS PTY RT VCR-2/ V.AUX DVD TV/DBS CDR/TAPE PHONO CD SURROUND INPUT OUTPUT TEST TONE SPEAKER 6.1 / 7.1 SURROUND 5CH / 7CH ANALOG EXT.IN MODE CALL 2 BACKLIGHT CALL 1 STEREO STEREO DOLBY/DTS SURROUND D …
Denon AVR 3802 — page 64

ESP A Ñ OL 184 Reproducir utilizando las tomas de entrada exterior (EXT . IN) • Cuando el modo de entrada es la entrada exterior (EXT . IN) el modo de reproducci ó n (DIRECT , STEREO, DOLBY/DTS SURROUND, 5/7CH STEREO, WIDE SCREEN, o DSP SIMULA TION) no puede ajustarse. NOT AS: • En los modos de reproducci ó n que no sean el modo entrada exte …
Denon AVR 3802 — page 65

Utilizaci ó n de la funci ó n del regulador de intensidad de luz • Utilice esta funci ó n para cambiar la intensidad de luz de la pantalla. La intensidad de brillo de la pantalla cambia en cuatro pasos (brillante, medio, d é bil y apagado), pulsando repetidamente el bot ó n DIMMER (reductor de intensidad de luz) del mando a distancia del equ …
Denon AVR 3802 — page 66

ESP A Ñ OL 186 [3] Uso de la unidad de control remoto durante la reproducci ó n del MUL TI-SOURCE (selecci ó n del generador salida) Esta operaci ó n es posible cuando se selecciona el modo M ú ltiple. Esta operaci ó n no es posible en el modo REC OUT . 1 Seleccione “ MUL TI “ utilizando el bot ó n RECEIVER. RECEIVER (Mando a distancia) …
Denon AVR 3802 — page 67

ESP A Ñ OL 187 10 SURROUND Antes de poner en marcha la funci ó n surround • Antes de poner en marcha la funci ó n surround, utilice los tonos de prueba para ajustar el nivel de reproducci ó n de los distintos altavoces. Este ajuste puede hacerse con la configuraci ó n del sistema (v é ase la p á gina 173) o con el mando a distancia, como s …
Denon AVR 3802 — page 68

ESP A Ñ OL 188 3 Ajuste el modo de par á metros de sonido envolvente. SURROUND PARAMETER (Unidad principal) SURR. PARA. (Mando a distancia) MODE CINEMA Pantalla La visualizaci ó n en pantalla difiere de acuerdo a si la operaci ó n se lleva a cabo desde la unidad principal o desde la unidad de mando a distancia. 4 Seleccione el modo de reproducc …
Denon AVR 3802 — page 69

ESP A Ñ OL 189 3 Reproduzca una fuente de programas con la marca , . 4 Visualizar el men ú del par á metro surround. DIGITAL • El indicador DTS se ilumina cuando se reproducen fuentes DTS. S ’ allume SIGNAL DETECT • El indicador SIGNAL DETECT se ilumina cuando se reproducen fuentes de sonido envolvente de 6.1 canales/ DTS-ES que contienen …
Denon AVR 3802 — page 70

ESP A Ñ OL 190 1 2 3 4 5 6 7 VIDEO GAME ROCK ARENA JAZZ CLUB MONO MOVIE (NOT A 1) MA TRIX WIDE SCREEN 5CH/7CH STEREO Utilizar esto para disfrutar del generador del video juego. Utilice este modo para tener la sensaci ó n de asistir a un concierto en directo en un escenario donde los sonidos se reflejan y llegan de todas las direcciones. Este modo …
Denon AVR 3802 — page 71

ESP A Ñ OL 191 SELECT (Unidad principal) 1 Girar el bot ó n SELECT para seleccionar el modo surround. B 1 2 1,3 2 Pulsar el bot ó n SURROUND P ARAMETER Pulsar y mantener pulsado el bot ó n del par á metro surround para seleccionar el par á metro que desee ajustar . • Los par á metros que pueden ser ajustados difieren seg ú n los diferente …
Denon AVR 3802 — page 72

ESP A Ñ OL 192 1 El tono se activa de la siguiente forma cada vez que se pulsa el bot ó n TONE CONTROL. • Para operar el control del tono desde la unidad principal. TONE CONTROL (Unidad principal) 1 TREBLE 0 BASS 2 Una vez seleccionado el canal del volumen que se desea ajustar , girar el bot ó n SELECT para ajustar el nivel. • Para aumentar …
Denon AVR 3802 — page 73

ESP A Ñ OL 193 12 RECEPCI Ó N DE RADIO Sintonizaci ó n autom á tica B 1 1 Ajuste la funci ó n de entrada a “ TUNER “ FUNCTION (Unidad principal) 2 Pulse el bot ó n RECEIVER en la unidad de mando a distancia para seleccionar “ TUNER “ . RECEIVER (Mando a distancia) 3 Observando el visualizador , presione el bot ó n BAND para seleccion …
Denon AVR 3802 — page 74

ESP A Ñ OL 194 Sintonizaci ó n de estaciones memorizadas OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DVD POWER REMOTE CONTROL UNIT RC-884 ON / SOURCE TUNER PHONO CD DISPLAY RETURN SETUP MENU SHIFT SURR. PARA. OSD A/B MUTING BAND MODE TUNING TUNING 2 1 • Para llamar las estaciones preajustadas …
Denon AVR 3802 — page 75

ESP A Ñ OL 195 B ú squeda PTY Use esta funci ó n para buscar las estaciones RDS que transmitan un tipo de programa designado (PTY). Para una descripci ó n de cada tipo de programa, ver “ T ipo de programa (PTY) “ . 1 2 3 45 6 789 +10 0 TV/ VCR OFF TV CD CDR/MD/ TAPE RECEIVER VCR DBS/CABLE SKIP SKIP ENTER MEMORY VOLUME CHANNEL + — + — VDP DV …
Denon AVR 3802 — page 76

ESP A Ñ OL 196 NOT AS: • Si el paso 3 no funciona, comience de nuevo desde el paso 1. • Si el microprocesador se ha reajustado, todos los ajustes de los botones quedan reajustados a los valores por defecto (los valores que se establecieron en f á brica). B 1, 2 2 13 MEMORIA DE LA Ú L TIMA FUNCI Ó N • Este equipo est á equipado con una me …
Denon AVR 3802 — page 77

ESP A Ñ OL 197 FL C SW FR FL C SW FR SL SR SB SL SR SB Altavoces surround m ú ltiples Campo sonoro tipo sala de cine Campo sonoro de sala de audici ó n En este caso, resulta importante conseguir la misma sensaci ó n de amplitud o expansi ó n que en las salas de cine con los canales surround. Para conseguirlo, en algunos casos el n ú mero de a …
Denon AVR 3802 — page 78

ESP A Ñ OL 198 • Coloque los altavoces frontales, el central y los subwoofer en las mismas posiciones que se indican en el ejemplo (1). • Lo mejor es colocar los altavoces surround directamente a un lado o ligeramente hacia delante de la posici ó n de visi ó n, y de 60 a 90 cm por encima de las orejas. • Igual que el m é todo de instalaci …
Denon AVR 3802 — page 79

ESP A Ñ OL 199 2 Formato Dolby Digital y Dolby Pro Logic 2 Medios compatibles Dolby Digital y m é todos de reproducci ó n. Marcas que indican compatibilidad con Dolby Digital: y . Los siguientes son ejemplos generales. Refi é rase tambi é n al manual de instrucciones de uso del reproductor . 1 Utilice un adaptador comercial disponible al conec …
Denon AVR 3802 — page 80

ESP A Ñ OL 200 Formato Surround Digital DTS El Digital Theater Surround (tambi é n denominado DTS m á s sencillamente), es un formato de se ñ ales digitales multicanal desarrollado por Digital Theater Systems. DTS ofrece los mismos 5,1 canales de reproducci ó n que Dolby Digital (frontal izquierdo, frontal derecho y central, surround izquierdo …
Denon AVR 3802 — page 81

ESP A Ñ OL 201 Elementos de configuraci ó n del sistema y valores por defecto (establecidos a la salida de f á brica) Modos y par á metros surround Configuraci ó n del sistema Ajustes por defecto w e t y i Speaker Configuration Surround Speaker Setting (Subwoofer mode) SB CH Auto Flag Detect Channel Level Digital In Assignment On Screen Displa …
Denon AVR 3802 — page 82

ESP A Ñ OL 202 17 ESPECIFICACIONES 2 Secci ó n de audio. • Amplificador de potencia Salida: Front: 105 W + 105 W ( 8 Ω /ohmios, 20 Hz ~ 20 kHz con 0,05% de T .H.D. ) 150 W + 150 W ( 6 Ω /ohmios, 1 kHz with 0,7% T .H.D. ) Center: 105 W ( 8 Ω /ohmios, 20 Hz ~ 20 kHz con 0,05% de T .H.D. ) 150 W ( 6 Ω /ohmios, 1 kHz with 0,7% T .H.D. ) Sur …

Источник

Contents
Table of Contents
Troubleshooting
Bookmarks

Quick Links

AV SURROUND RECEIVER

AVR-3802

PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER

FUNCTION

TUNING

REC /

6.1 / 7.1

SOURCE

PRESET

MULTI

SURROUND

PHONES

ON / STANDBY

We greatly appreciate your purchase of the AVR-3802.

To be sure you take maximum advantage of all the features the AVR-3802 has to offer, read these instructions

carefully and use the set properly. Be sure to keep this manual for future reference, should any questions or

problems arise.

«SERIAL NO.

PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE

CABINET FOR FUTURE REFERENCE»

AVR-3802

REMOTE

SIGNAL

SURROUND

SENSOR

BACK CH

DIGITAL

OUTPUT

INPUT

SIGNAL

ON / STANDBY

AUTO

PCM

DTS

DETECT

SURROUND

SPEAKER

INPUT

AUTO

PCM

DTS

ANALOG

EXT. IN

VIDEO SELECT

DIMMER

STATUS

TONE DEFEAT

MASTER VOLUME

VOLUME LEVEL

SURROUND

SELECT

CH VOL

MODE

SURROUND

TONE

PARAMETER

CONTROL

POWER

ON /

OFF

SOURCE

RC-883

REMOTE CONTROL UNIT

CDR/MD/ TAPE RECEIVER

VCR

DBS/CABLE

VDP

DVD

DISPLAY

SURR.

OSD

PARA.

SETUP

RETURN

TUNING

A/B

MEMORY

BAND

MODE

CHANNEL

VOLUME

TUNING

SKIP

ENTER

—

SHIFT

SKIP

MUTING

TUNER

PHONO

CDR/TAPE

VDP

DVD

VCR-1

VCR-2/V.AUX

TV/DBS

TV/

+10

VCR

TEST

SPEAKER

OUTPUT

TONE

SURROUND

DOLBY/DTS

DSP

5CH / 7CH

SURROUND

SIMU.

STEREO

6.1 / 7.1

DIRECT

STEREO

SURROUND

INPUT

MODE

ANALOG

EXT.IN

SYSTEM CALL

CALL 1

CALL 2

BACKLIGHT

Summary of Contents for Denon AVR-3802

Инструкции по эксплуатации

1

Preview

Denon AVR-3802 инструкция по эксплуатации
(82 страницы)

Языки:Английский
Тип:
PDF
Размер:
5.66 MB

Просмотр

На NoDevice можно скачать инструкцию по эксплуатации для Denon AVR-3802. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации Denon AVR-3802. Инструкции по использованию помогут правильно настроить Denon AVR-3802, исправить ошибки и выявить неполадки.

AVR-3802

PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER

OUTPUT

SIGNAL

DETECT

SURROUND

BACK CH

TUNING

PRESET

REC /

MULTI

6.1 / 7.1

SURROUND

SOURCE

ON / STANDBY

REMOTE
SENSOR

FUNCTION

SURROUND

SPEAKER

AUTO

PCM

DTS

SIGNAL

DIGITAL

INPUT

VOLUME LEVEL

MASTER VOLUME

SURROUND

MODE

SURROUND

PARAMETER

TONE

CONTROL

SELECT

CH VOL

DIMMER

STATUS

TONE DEFEAT

VIDEO SELECT

INPUT

EXT. IN

ANALOG

AUTO

PCM

DTS

PHONES

ON / STANDBY

+10

TV/

VCR

OFF

CDR/MD/ TAPE RECEIVER

VCR

DBS/CABLE

SKIP

ENTER

MEMORY

VOLUME

CHANNEL

—

VDP

DVD

POWER

REMOTE CONTROL UNIT

RC-883

ON /

SOURCE

TUNER

VDP

VCR-1

VCR-2 /V.AUX

DVD

TV/DBS

CDR/ TAPE

PHONO

SURROUND

INPUT

OUTPUT

TEST

TONE

SPEAKER

6.1 / 7.1

SURROUND

5CH / 7CH

ANALOG

EXT.IN

MODE

CALL 2

BACKLIGHT

CALL 1

STEREO

DOLBY/DTS
SURROUND

DSP
SIMU.

DISPLAY

SYSTEM CALL

DIRECT

RETURN

SETUP

SHIFT

SURR.

PARA.

OSD

A/B

MUTING

BAND

MODE

TUNING

AV SURROUND RECEIVER

AVR-3802

OPERATING INSTRUCTIONS

We greatly appreciate your purchase of the AVR-3802.

“SERIAL NO.

PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE
CABINET FOR FUTURE REFERENCE”

AV SURROUND RECEIVER

OPERATING INSTRUCTIONS

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

ISTRUZIONI PER L’USO

INSTRUCCIONES DE OPERACION

GEBRUIKSAANWIJZING

BRUKSANVISNING

ON / STANDBY

OFF£AVR-3802PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER

OUTPUT

SIGNAL

DETECT

SURROUND

BACK CH

TUNINGPRESETREC /MULTI6.1 / 7.1SURROUNDSOURCE

ON / STANDBY

REMOTE

SENSOR

FUNCTIONSURROUNDSPEAKER

AUTO

PCM

DTS

SIGNAL

DIGITAL

INPUT

VOLUME LEVEL

MASTER VOLUMESURROUND

MODE

SURROUNDPARAMETER

TONE

CONTROLSELECT CH VOLDIMMERSTATUS TONE DEFEATVIDEO SELECTINPUT EXT. INANALOGAUTO PCM DTSPHONES

456

789

+10

TV/

VCR

OFF

CDR/MD/ TAPE RECEIVER

VCR DBS/CABLE

SKIP

ENTER

MEMORY

VOLUME

CHANNEL

—

VDP DVD

POWER

REMOTE CONTROL UNIT

RC-884

ON /

SOURCE

TUNER

VDP

VCR-1 VCR-2/ V.AUX

DVD

TV/DBS

CDR/TAPE

PHONO

SURROUND

PTY RTRDS

INPUT

OUTPUT

TEST

TONE

SPEAKER

6.1 / 7.1

SURROUND

5CH / 7CH

ANALOG

EXT.INMODE

CALL 2

BACKLIGHT

CALL 1

STEREO

DOLBY/DTS

SURROUND

DSP

SIMU.

DISPLAY

SYSTEM CALL

DIRECT

RETURN

SETUP

SHIFT

SURR.

PARA.

OSD

A/B

MUTING

BAND MODE

TUNING

FOR ENGLISH READERS PAGE 112 ~ PAGE 142

FÜR DEUTSCHE LESER SEITE 143 ~ SEITE 182

POUR LES LECTEURS FRANCAIS PAGE 183 ~ PAGE 122

PER IL LETTORE ITALIANO PAGINA 123 ~ PAGINA 162

PARA LECTORES DE ESPAÑOL PAGINA 163 ~ PAGINA 202

VOOR NEDERLANDSTALIGE LEZERS PAGINA 203 ~ PAGINA 242

FOR SVENSKA LÄSARE SIDA 243 ~ SIDA 282

DENON

АУДИО-ВИДЕО РЕСИВЕР
С ПОДДЕРЖКОЙ АКУСТИЧЕСКОГО ЗВУКА

AVR-3808

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

Графический Интерфейс Пользователя (ГИП)

Используйте данное руководство совместно с инструкцией по эксплуатации, отображаемой на экране графического интерфейса пользователя.

Меню Операций (стр. 22, 23)
Карта Меню (стр. 24)
Язык (стр. 36)
Операции пульта дистанционного управления (стр. 60)

Источник

249 ₽

Инструкция (руководство пользователя) на AV ресивер пространственного звучания Denon AVR-3802

Артикул: denon-avr-3802

Категория: Denon

Описание
Детали

Описание

Инструкцию по эксплуатации Denon AVR-3802 на русском языке можно будет скачать в личном кабинете после оформления и оплаты заказа.

Детали

Формат файла	PDF
Размер инструкции в кб	1690

Источник

Page 1: Denon AVR-3802

Page 2: Denon AVR-3802

Page 3: Denon AVR-3802

Page 4: Denon AVR-3802

Page 5: Denon AVR-3802

Page 6: Denon AVR-3802

Page 7: Denon AVR-3802

Page 8: Denon AVR-3802

Page 9: Denon AVR-3802

Page 10: Denon AVR-3802

Page 11: Denon AVR-3802

Page 12: Denon AVR-3802

Page 13: Denon AVR-3802

Page 14: Denon AVR-3802

Page 15: Denon AVR-3802

Page 16: Denon AVR-3802

Page 17: Denon AVR-3802

Page 18: Denon AVR-3802

Page 19: Denon AVR-3802

Page 20: Denon AVR-3802

Page 21: Denon AVR-3802

Page 22: Denon AVR-3802

Page 23: Denon AVR-3802

Page 24: Denon AVR-3802

Page 25: Denon AVR-3802

Page 26: Denon AVR-3802

Page 27: Denon AVR-3802

Page 28: Denon AVR-3802

Page 29: Denon AVR-3802

Page 30: Denon AVR-3802

Page 31: Denon AVR-3802

Page 32: Denon AVR-3802

Page 33: Denon AVR-3802

Page 34: Denon AVR-3802

Page 35: Denon AVR-3802

Page 36: Denon AVR-3802

Page 37: Denon AVR-3802

Page 38: Denon AVR-3802

Page 39: Denon AVR-3802

Page 40: Denon AVR-3802

Page 41: Denon AVR-3802

Page 42: Denon AVR-3802

Page 43: Denon AVR-3802

Page 44: Denon AVR-3802

Page 45: Denon AVR-3802

Page 46: Denon AVR-3802

Page 47: Denon AVR-3802

Page 48: Denon AVR-3802

Page 49: Denon AVR-3802

Page 50: Denon AVR-3802

Page 51: Denon AVR-3802

Page 52: Denon AVR-3802

Page 53: Denon AVR-3802

Page 54: Denon AVR-3802

Page 55: Denon AVR-3802

Page 56: Denon AVR-3802

Page 57: Denon AVR-3802

Page 58: Denon AVR-3802

Page 59: Denon AVR-3802

Page 60: Denon AVR-3802

Page 61: Denon AVR-3802

Page 62: Denon AVR-3802

Page 63: Denon AVR-3802

Page 64: Denon AVR-3802

Page 65: Denon AVR-3802

Page 66: Denon AVR-3802

Page 67: Denon AVR-3802

Page 68: Denon AVR-3802

Page 69: Denon AVR-3802

Page 70: Denon AVR-3802

Page 71: Denon AVR-3802

Page 72: Denon AVR-3802

Page 73: Denon AVR-3802

Page 74: Denon AVR-3802

Страница 1

Страница 2

Страница 3

Страница 4

Страница 5

Страница 6