Casio wr 3502 ae 1500wh инструкция

Operation Guide 3502

E-9

Alarms

You can set up to five independent multi-function alarms 
with hour, minutes, month, and day. When an alarm is 
turned on, the alarm tone sounds when the alarm time is 
reached. One of the alarms has a snooze feature.
You can also turn on an Hourly Time Signal that causes 
the watch to beep every hour on the hour.

x

 There are five alarms numbered 

1

 through 

5

. The 

Hourly Time Signal screen is indicated by 

:00

.

x

 All of the operations in this section are performed 
in the Alarm Mode, which you enter by pressing 

C

(page E-4).

Alarm date 

(Month – Day)

Alarm time 
(Hour : Minutes)

Alarm number

E-8

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press 

D

 to toggle between 12-hour timekeeping and 

24-hour timekeeping.

x

 With the 12-hour format, the 

P

 (PM) indicator appears to the left of the hour 

digits for times in the range of noon to 11:59 p.m. and no indicator appears to 
the left of the hour digits for times in the range of midnight to 11:59 a.m.

x

 With the 24-hour format, times are displayed in the range of 0:00 to 23:59, 
without any indicator.

x

 The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is 
applied in all other modes.

E-7

3.  When the setting you want to change is flashing, press 

D

 to change it as 

described below.

To change this setting

Perform this button operation

Seconds

Press 

D

 to reset to 

00

.

Hour, Minutes, Year, Month, Day

Press 

D

 to increase the setting.

x

 Pressing 

D

 while the seconds are in the range of 30 to 59 resets them to 

00

and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4.  Press 

A

 to exit the setting screen.

x

 The day of the week is automatically displayed in accordance with the date 
(year, month, and day) settings.

x

 The year can be set in the range of 2000 to 2099.

x

 The watch’s built-in full automatic calendar automatically makes allowances for 
different month lengths and leap years. Once you set the date, there should be 
no reason to change it except after you have the watch’s battery replaced.

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current 
time and date.

 To set the time and date

1.  In the Timekeeping Mode, hold down 

A

 until the 

seconds start to flash, which indicates the setting 
screen.

2.  Press 

C

 to move the flashing in the sequence shown 

below to select other settings.

C

C

C

Seconds

Hour

Minutes

Day

Year

Month

C

C

C

Hour : Minutes

Seconds

Month – Day

Day of week

PM indicator

E-5

 Countdown Timer 

Mode

C

C

C

 Stopwatch Mode

 Dual Time Mode

x

 In any mode, hold down 

C

 for about one second to return to the Timekeeping 

Mode.

E-4

General Guide

x

 Press 

C

 to change from mode to mode.

x

 In any mode, press 

B

 to illuminate the display.

Timekeeping Mode

 Alarm Mode

C

C

E-3

To set the Dual Time ………………………………………………………………………………… E-21

To turn on the backlight …………………………………………………………………………… E-22

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in 
this manual.

To set the time and date …………………………………………………………………………….. E-6

To toggle between 12-hour and 24-hour timekeeping …………………………………. E-8

To set an alarm time ………………………………………………………………………………… E-11

To test the alarm ……………………………………………………………………………………… E-13

To turn Alarms 2 through 5 and the Hourly Time Signal on and off …………….. E-14

To select the operation of Alarm 1 ……………………………………………………………. E-15

To use the countdown timer …………………………………………………………………….. E-16

To set the countdown start time ………………………………………………………………. E-17

To turn auto-repeat on and off …………………………………………………………………. E-18

To measure times with the stopwatch ………………………………………………………. E-20

E-1

Contents

General Guide ……………………………………………………………………………………………. E-4

Timekeeping ……………………………………………………………………………………………… E-6

Alarms……………………………………………………………………………………………………….. E-9

Countdown Timer …………………………………………………………………………………….. E-16

Stopwatch ……………………………………………………………………………………………….. E-19

Dual Time ………………………………………………………………………………………………… E-21

Backlight …………………………………………………………………………………………………. E-22

Reference ………………………………………………………………………………………………… E-23

Specifications ………………………………………………………………………………………….. E-25

Operating Precautions ……………………………………………………………………………… E-27

User Maintenance ……………………………………………………………………………………. E-37

E

About This Manual

x

 Depending on the model o

f

 your watch, display text 

appears either as dark 

f

igures on a light background, or 

light 

f

igures on a dark background. All sample displays 

in this manual are shown using dark 

f

igures on a light 

background.

x

 Button operations are indicated using the letters shown 
in the illustration.

x

 Each section o

f

 this manual provides you with the 

in

f

ormation you need to per

f

orm operations in each 

mode. Further details and technical in

f

ormation can be 

f

ound in the “Re

f

erence” section.

x

 To ensure that this watch provides you with the years 
o

f

 service 

f

or which it is designed, care

f

ully read and 

f

ollow the instructions under “Operating Precautions” 

and “User Maintenance”.

x

 Be sure to keep all user documentation handy 

f

or 

f

uture 

re

f

erence.

MA2008-EA

© 2021 CASIO COMPUTER CO., LTD.

Operation Guide 3502

E-9

Alarms

You can set up to five independent multi-function alarms

with hour, minutes, month, and day. When an alarm is

turned on, the alarm tone sounds when the alarm time is

reached. One of the alarms has a snooze feature.

You can also turn on an Hourly Time Signal that causes

the watch to beep every hour on the hour.

x There are five alarms numbered 1 through 5. The

Hourly Time Signal screen is indicated by :00.

x All of the operations in this section are performed

in the Alarm Mode, which you enter by pressing C

(page E-4).

Alarm date

(Month – Day)

Alarm time

(Hour : Minutes)

Alarm number

E-8

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

x With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and no indicator appears to

the left of the hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-7

3. When the setting you want to change is flashing, press D to change it as

described below.

To change this setting Perform this button operation

Seconds

Press D to reset to 00.

Hour, Minutes, Year, Month, Day

Press D to increase the setting.

x Pressing D while the seconds are in the range of 30 to 59 resets them to 00

and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

x The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.

x The year can be set in the range of 2000 to 2099.

x The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be

no reason to change it except after you have the watch’s battery replaced.

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

CC

C

Seconds Hour Minutes

Day YearMonth

CC

C

Hour : Minutes

Seconds

Month – Day

Day of week

PM indicator

E-5

Countdown Timer

Mode

CC

C

Stopwatch Mode Dual Time Mode

x In any mode, hold down C for about one second to return to the Timekeeping

Mode.

E-4

General Guide

x Press C to change from mode to mode.

x In any mode, press B to illuminate the display.

Timekeeping Mode Alarm Mode

C

C

E-3

To set the Dual Time …………………………………………………………………………………E-21

To turn on the backlight ……………………………………………………………………………E-22

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date …………………………………………………………………………….. E-6

To toggle between 12-hour and 24-hour timekeeping ………………………………….E-8

To set an alarm time …………………………………………………………………………………E-11

To test the alarm ………………………………………………………………………………………E-13

To turn Alarms 2 through 5 and the Hourly Time Signal on and off ……………..E-14

To select the operation of Alarm 1 …………………………………………………………….E-15

To use the countdown timer …………………………………………………………………….. E-16

To set the countdown start time ……………………………………………………………….E-17

To turn auto-repeat on and off ………………………………………………………………….E-18

To measure times with the stopwatch ……………………………………………………….E-20

E-1

Contents

General Guide ……………………………………………………………………………………………. E-4

Timekeeping ………………………………………………………………………………………………E-6

Alarms………………………………………………………………………………………………………..E-9

Countdown Timer …………………………………………………………………………………….. E-16

Stopwatch ……………………………………………………………………………………………….. E-19

Dual Time …………………………………………………………………………………………………E-21

Backlight ………………………………………………………………………………………………….E-22

Reference ………………………………………………………………………………………………… E-23

Specifications …………………………………………………………………………………………..E-25

Operating Precautions ……………………………………………………………………………… E-27

User Maintenance …………………………………………………………………………………….E-37

E

About This Manual

x Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

x Button operations are indicated using the letters shown

in the illustration.

x Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

x To ensure that this watch provides you with the years

of service for which it is designed, carefully read and

follow the instructions under “Operating Precautions”

and “User Maintenance”.

x Be sure to keep all user documentation handy for future

reference.

MA2008-EA

© 2021 CASIO COMPUTER CO., LTD.

File type: PDF

File name: 19436220_ae-1500wh.pdf

File size: 149.84 KB

File Language: English

Pages: 3

Author: Casio

Operation Guide 3502

E-9

Alarms

You can set up to five independent multi-function alarms

with hour, minutes, month, and day. When an alarm is

turned on, the alarm tone sounds when the alarm time is

reached. One of the alarms has a snooze feature.

You can also turn on an Hourly Time Signal that causes

the watch to beep every hour on the hour.

x There are five alarms numbered 1 through 5. The

Hourly Time Signal screen is indicated by :00.

x All of the operations in this section are performed

in the Alarm Mode, which you enter by pressing C

(page E-4).

Alarm date

(Month – Day)

Alarm time

(Hour : Minutes)

Alarm number

E-8

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

x With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and no indicator appears to

the left of the hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-7

3. When the setting you want to change is flashing, press D to change it as

described below.

To change this setting Perform this button operation

Seconds

Press D to reset to 00.

Hour, Minutes, Year, Month, Day

Press D to increase the setting.

x Pressing D while the seconds are in the range of 30 to 59 resets them to 00

and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

x The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.

x The year can be set in the range of 2000 to 2099.

x The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be

no reason to change it except after you have the watch’s battery replaced.

E-6

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

CC

C

Seconds Hour Minutes

Day YearMonth

CC

C

Hour : Minutes

Seconds

Month – Day

Day of week

PM indicator

E-5

Countdown Timer

Mode

CC

C

Stopwatch Mode Dual Time Mode

x In any mode, hold down C for about one second to return to the Timekeeping

Mode.

E-4

General Guide

x Press C to change from mode to mode.

x In any mode, press B to illuminate the display.

Timekeeping Mode Alarm Mode

C

C

E-3

To set the Dual Time …………………………………………………………………………………E-21

To turn on the backlight ……………………………………………………………………………E-22

E-2

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date …………………………………………………………………………….. E-6

To toggle between 12-hour and 24-hour timekeeping ………………………………….E-8

To set an alarm time …………………………………………………………………………………E-11

To test the alarm ………………………………………………………………………………………E-13

To turn Alarms 2 through 5 and the Hourly Time Signal on and off ……………..E-14

To select the operation of Alarm 1 …………………………………………………………….E-15

To use the countdown timer …………………………………………………………………….. E-16

To set the countdown start time ……………………………………………………………….E-17

To turn auto-repeat on and off ………………………………………………………………….E-18

To measure times with the stopwatch ……………………………………………………….E-20

E-1

Contents

General Guide ……………………………………………………………………………………………. E-4

Timekeeping ………………………………………………………………………………………………E-6

Alarms………………………………………………………………………………………………………..E-9

Countdown Timer …………………………………………………………………………………….. E-16

Stopwatch ……………………………………………………………………………………………….. E-19

Dual Time …………………………………………………………………………………………………E-21

Backlight ………………………………………………………………………………………………….E-22

Reference ………………………………………………………………………………………………… E-23

Specifications …………………………………………………………………………………………..E-25

Operating Precautions ……………………………………………………………………………… E-27

User Maintenance …………………………………………………………………………………….E-37

E

About This Manual

x Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

x Button operations are indicated using the letters shown

in the illustration.

x Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

x To ensure that this watch provides you with the years

of service for which it is designed, carefully read and

follow the instructions under “Operating Precautions”

and “User Maintenance”.

x Be sure to keep all user documentation handy for future

reference.

MA2008-EA

© 2021 CASIO COMPUTER CO., LTD.