Bijur delimon инструкция по настройке

1 Operators ManualSC400 Lubrication Controller35979 r#32 Bijur Delimon INTERNATIONAL Operators Manual SC400 CONTROLLER 35979 r#3 Copyright Bijur Delimon International 2013. Bijur Delimon International reserves the right to update or improve the technical specifi cations for this product without prior Delimon INTERNATIONAL(919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX Perimeter Park Dr., Suite 120 Morrisville, NC 27560 ContentsAT A GLANCE ..3 GENERAL ..4 SAFETY ..5 APPLICATION ..5 TECHNICAL RANGES ..6 DIMENSIONS AND MOUNTING ..6 WIRING: QUICK GUIDE ..7 WIRING: SC400 POWER ..8 WIRING: VALVE A AND VALVE B OUTPUTS.

2 9 WIRING: AUTOFILL PUMP OUTPUT ..9 WIRING: INPUTS (GENERAL) .. 10 WIRING: INPUT (DETAILS) .. 11 WIRING: FAULT SIGNALS .. 11 JUMPER LINKS .. 11 PROGRAMMING: FIRST TIME START UP/SYSTEM SETUP .. 12 PROGRAMMING: ENGINEERING PARAMETERS .. 12-13 PROGRAMMING MODE OPERATOR LEVEL(TIMING SETUP) .. 12 ADVANCED FUNCTIONS .. 14 PROGRAMMING SINGLE LINE 14 PROGRAMMING SINGLE LINE INJECTORS .. 16 PROGRAMMING DUAL LINE HYDRAULIC .. 17 PROGRAMMING DUAL LINE ELECTRIC .. 19 PROGRAMMING CONTINUOUS .. 21 SYSTEM MESSAGES .. 21 WARNING CONDITIONS .. 21 FAULT CONDITIONS .. 22 TECH DATA SHEET LIST .. 23 SERVICE PARTS .. 23 APPENDIX: SYSTEM EXAMPLES .. 24-25 NOTES.

3 26-273 Bijur Delimon INTERNATIONAL Operators Manual SC400 CONTROLLER 35979 r#3SC400 Controller at a GlanceKEYPADM4 SCREW (4)IP56 ENCLOSUREALARM (RED)PUMP ON (YELLOW)LED SCREENMOVABLE TAB (4)KEYPADPOWER (GREEN)Moveable tabs are for external mounting only. See page 6 for detailed mounting Delimon INTERNATIONAL Operators Manual SC400 CONTROLLER 35979 r#3 GENERALP rior to start up, we recommend reading these operating instructions carefully. We do not assume any liability for damages and operating issues resulting from failing to follow these operating use beyond the applications described in these operating instructions is considered to be not in accordance with the product s intended purpose.

4 The manufacturer is not to be held responsible for any damages resulting from this: the user alone bears the corresponding to fi gures and indications in these operating instructions we reserve the right to make technical changes which might become necessary for copyright on these operating instructions is kept reserved by the company Bijur Delimon . These operating instructions are intended for the erecting, operating and supervising personnel. They contain regula-tions and drawings of technical nature which must not completely or partially — be distributed nor used nor communicated to others without operating instructions contain fundamental instructions which are to be observed during erection, operation and maintenance.

5 Therefore it is absolutely necessary for the installer and the competent qualifi ed staff/user to read these operating instructions before installation and start-up. The operating instructions must be available at all times at the place of use of the only the general safety instructions stated under this main point safety are to be observed, but also the other specifi c safety instructions stated under the other main cation of safety warnings in the operatinginstructionsThe safety warnings contained in these operating instructions which, if not observed, may cause dangers to people, are specially marked with general danger symbolssafety symbol according to DIN 4844, warning about a danger symbol according to DIN 4844, warning about dangerous electric case of safety instructions which.

6 If not observed, may cause damage to the machine and its function, the word is that are directly attached to the machine must be observed at all events and maintained in a fully legible : There is an increased skid risk in case of spilled/leaked out lubricants. They are to be removed, properly and sign according to DIN 4844, warning about skid qualifi cation and trainingThe operating, maintaining, inspecting and erecting personnel must have the appropriate qualifi cation for such work. The scope of responsibility, competence and supervision of the personnel shall to be regulated by the user. If the personnel do not have the necessary knowledge, they must be trained and given instructions.

7 This can be assisted, if necessary, by the manufacturer/supplier on behalf of the user of the machine. Furthermore, the user shall make sure that the contents of the operating instructions are fully understood by the in case of nonobservance of the safety instructionsThe nonobservance of the safety instructions may result in hazards to persons, to the environment and to the machine. The nonobservance of the safety instructions may lead to the loss of any claims for damages. In detail, the nonobservance may for instance lead to the following hazards: Failure of important functions of the machine/system Failure of prescribed methods for maintenance and repair Hazard to persons by electrical, mechanical and chemical infl uences Hazard to the environment by the leakage of dangerous substancesSafety conscious workingThe safety instructions stated in these operating instructions, the existing national regulations related to accident prevention, as well as possible internal working.

8 Operating and safety rules of the user are to be Delimon INTERNATIONALOPERATORS Manual SC400 CONTROLLER 35979 r#3 Safety instructions for the user/operator If hot or cold machine parts lead to dangers, these parts shall be protected against touch. Protection against touch for moving parts (e. g. coupling) must not be removed when the machine is in operation. Leakages (e. g. from the shaft seal) of hazardous goods to be delivered (e. g. explosive, toxic, hot) are to be removed in such a way that there is no danger to persons and environment. Legal rules are to be observed.. Hazards caused by electrical power are to be excluded (for details, please refer to local, state and federal regulations).

9 Safety instructions for maintenance, inspection and installation workThe user shall take care that all the maintenance, inspection and installa-tion work is executed by authorized and qualifi ed skilled personnel who have informed themselves adequately by thoroughly studying these operating , operation, and maintenance personnel shall conform to Federal, State, Local and internal safety or pump systems that deliver media being hazardous to health shall be decontaminated. Immediately after completion of the work, all safety and protective equipment shall be reinstalled and/or : When working with compressed air, hydraulics, or electricity, wear Personal Protective Equipment (PPE).

10 (DIN 4844 Use breathing mask) (DIN 4844 Use breathing mask) (DIN 4844 Pull mains cord before opening) (DIN 4844 De-energize before work)Before recommissioning, observe the points stated in section initial start-up .Unauthorized conversion and manufacture of spare partsConversion or modifi cations to the machine are only permitted when agreed to by the manufacturer. Original spare parts and accessories authorized by the manufacturer serve to ensure safety. The use of other parts may render the liability for consequential losses null and voidUnacceptable modes of operationThe operational reliability of the machine supplied is only guaranteed if the machine is used in accordance with its intended purposes as per APPLICA-TION section of these operating instructions.

List of Categories:

• Tools
• Water Pump
• Remote Control
• Controller
• Amplifier
• Lubrication systems

Featured manuals:

• Tools
  

  1	F4019		6	575	98
  2	F4018		4	376	91

• Water Pump
  

  1	DP556		7	653	144
  2	FZ-A		15	661	159
  3	ZP5000		10	790	119
  4	BF-E		11	433	65
  5	FZ-A		46	900	144
  6	DP1		6	750	113
  7	DP33		7	754	166
  8	CLP		28	1248	200
  9	FZ-A		47	920	148
  10	FZ-B		15	736	184

• Remote Control
  

  1	SS2200		6	1150	207

• Controller
  

  1	SC400		28	1383	277

• Amplifier
  

  1	PVB series		16	1120	213

• Lubrication Systems
  

  1	MultiPort		6	551	138
  2	V5B		4	399	72
  3	V5B		5	949	171
  4	SureFire II		4	319	74
  5	SureFire II		4	63	10
  6	HAP-P		3	940	179
  7	Farval CS1000		8	400	60
  8	SureFire II		4	70	14
  9	V5 60444		5	1450	305
  10	WS-E		14	201	37

Popular Bijur Delimon Manuals: SS2200, V5B, TMD-5

Useful for Reference:

• F4018

  		4	—	1435	302

• F4019

  		6	—	727	168

Similar Equipment: