Asrock h61m vg3 инструкция на русском

Если вы не хотите каждый раз читать информационные брошюры, касающиеся, тех или Asrock H61M-VG3 иных изделий, достаточно, прочитать их раз — сразу же после покупки устройства. Вы получите основное знания, касающиеся поддержания изделия Asrock H61M-VG3 в хорошем эксплуатационном состоянии, так, чтобы без проблем достигнуть его планируемого цикла работы. Затем инструкцию можно отложить на полку и вернуться к ней только в случае, если вы не уверены, правильно ли проводится техобслуживание изделия. Правильный уход является необходимым элементом Вашего удовольствия Asrock H61M-VG3.

Раз в году пересмотрите шкафчик, в котором держите инструкции для всех устройств, — выбросите те, которыми вы уже не пользуетесься. Это поможет Вам сохранять порядок в своей домашней базе инструкций обслуживания.

1

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documentation

by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifi ca-

tion or explanation and to the owners’ benefi t, without intent to infringe.

Disclaimer:

Specifi cations and information contained in this guide are furnished for informational use

only and subject to change without notice, and should not be constructed as a commit-

ment by ASRock. ASRock assumes no responsibility for any errors or omissions that may

appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or condi-

tions of merchantability or fi tness for a particular purpose. In no event shall ASRock, its

directors, offi cers, employees, or agents be liable for any indirect, special, incidental, or

consequential damages (including damages for loss of profi ts, loss of business, loss of

data, interruption of business and the like), even if ASRock has been advised of the pos-

sibility of such damages arising from any defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published October 2012

Copyright

©

2012 ASRock INC. All rights reserved.

2

ASRock H61M-VG3 / H61M-VS3 Motherboard

Motherboard Layout

English

1 32Mb SPI Flash 11 Power LED Header (PLED1)

2 SATA2 Connector (SATA_1 (PORT 1)) 12 System Panel Header (PANEL1)

3 SATA2 Connector (SATA_0 (PORT 0)) 13 Chassis Fan Connector (CHA_FAN1)

4 SATA2 Connector (SATA_2 (PORT 4)) 14 Chassis Intrusion Header (CI1)

5 SATA2 Connector (SATA_3 (PORT 5)) 15 PCI Express 3.0 x16 Slot (PCIE2)

6 USB 2.0 Header (USB6_7) 16 PCI Express 2.0 x1 Slot (PCIE1)

7 USB 2.0 Header (USB4_5) 17 Front Panel Audio Header (HD_AUDIO1)

8 ATX Power Connector (ATXPWR1) 18 1155-Pin CPU Socket

9 2 x 240-pin DDR3 DIMM Slots 19 CPU Fan Connector (CPU_FAN1)

(Dual Channel: DDR3_A1, DDR3_B1) 20 ATX 12V Power Connector (ATX12V1)

10 Clear CMOS Jumper (CLRCMOS1) 21 Intel H61 Chipset

DDR3_A1 (64bit, 240-pin module)

DDR3_B1 (64bit, 240-pin module)

Intel

H61

PCIE2

AUDIO

CODEC

32Mb

BIOS

ATXPWR1

ATX12V1

1

USB6_7

HDLED RESET

PLED PWRBTN

PANEL1

CLRCMOS1

1

PLED1

1

1

CHA_FAN1

CPU_FAN1

1

HD_AUDIO1

SATA_1(PORT1)

SATA_0(PORT0) SATA_2(PORT4)

1

USB4_5

SATA_3(PORT5)

CMOS

BATTERY

PCIE1

LAN

CI1

1

PS2

Keyboard

PS2

Mouse

VGA1

USB2.0

T: US B0

B:USB1

Top:

RJ-45

USB 2.0

T: U SB 2

B: USB3

Top:

LINE IN

Center:

FRONT

Bottom:

MIC IN

DDR3

X

Fast RAM

X

Fast USB

X

Fast LAN

RoHS

1

2

3

4

5

6

7

10

8

9

11

12

14 13

15

16

17

18

19

20

21

3

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

I/O Panel

1 PS/2 Mouse Port (Green) 6 USB 2.0 Ports (USB23)

* 2 LAN RJ-45 Port 7 USB 2.0 Ports (USB01)

3 Line In (Light Blue) 8 VGA Port

** 4 Front Speaker (Lime) 9 PS/2 Keyboard Port (Purple)

5 Microphone (Pink)

1

2

5

3

6

7

8

9

4

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link H61M-VG3:

Blinking Data Activity Off 10Mbps connection

On Link Orange 100Mbps connection

Green 1Gbps connection

H61M-VS3:

Off 10Mbps connection

On 100Mbps connection

ACT/LINK

LED

SPEED

LED

LAN Port

** To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows

®

XP:

After restarting your computer, you will fi nd “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system.

For Windows

®

8 / 7 / Vista

TM

:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Confi guration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

4

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

1. Introduction

Thank you for purchasing ASRock H61M-VG3 / H61M-VS3 motherboard, a reli-

able motherboard produced under ASRock’s consistently stringent quality control. It

delivers excellent performance with robust design conforming to ASRock’s commit-

ment to quality and endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-

step installation guide. More detailed information of the motherboard can be found

in the user manual presented in the Support CD.

Because the motherboard specifi cations and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modifi cations of this manual occur, the updated version

will be available on ASRock website without further notice. You may fi nd

the latest VGA cards and CPU support lists on ASRock website as well.

ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specifi c information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock H61M-VG3 / H61M-VS3 Motherboard (Micro ATX Form Factor)

ASRock H61M-VG3 / H61M-VS3 Quick Installation Guide

ASRock H61M-VG3 / H61M-VS3 Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

ASRock Reminds You…

To get better performance in Windows

®

8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/

Vista

TM

64-bit, it is recommended to set the BIOS option in Storage Con-

fi guration to AHCI mode. For the BIOS setup, please refer to the “User

Manual” in our support CD for details.

5

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

1.2 Specifi cations

Platform — Micro ATX Form Factor

— All Solid Capacitor design (H61M-VG3)

— Solid Capacitor for CPU power (H61M-VS3)

CPU — Supports 3

rd

and 2

nd

Generation Intel

®

Core

TM

i7 / i5 / i3 in

LGA1155 Package

— Supports Intel

®

Turbo Boost 2.0 Technology

— Supports K-Series unlocked CPU

Chipset — Intel

®

H61

— Supports Intel

®

Rapid Start Technology and Smart Connect

Technology

Memory — Dual Channel DDR3 Memory Technology

— 2 x DDR3 DIMM slots

— Supports DDR3 1600/1333/1066 non-ECC, un-buffered

memory (DDR3 1600 with Intel

®

Ivy Bridge CPU, DDR3

1333 with Intel

®

Sandy Bridge CPU)

— Max. capacity of system memory: 16GB (see CAUTION 1)

— Supports Intel

®

Extreme Memory Profi le (XMP) 1.3 / 1.2 with

Intel

®

Ivy Bridge CPU

Expansion Slot — 1 x PCI Express 3.0 x16 slot (blue @ x16 mode)

* PCIE 3.0 is only supported with Intel

®

Ivy Bridge CPU. With

Intel

®

Sandy Bridge CPU, it only supports PCIE 2.0.

— 1 x PCI Express 2.0 x1 slot

Graphics * Intel

®

HD Graphics Built-in Visuals and the VGA outputs can

be supported only with processors which are GPU

integrated.

— Supports Intel

®

HD Graphics Built-in Visuals: Intel

®

Quick

Sync Video 2.0, Intel

®

InTru

TM

3D, Intel

®

Clear Video HD

Technology, Intel

®

Insider

TM

, Intel

®

HD Graphics 2500/4000

with Intel

®

Ivy Bridge CPU

— Supports Intel

®

HD Graphics Built-in Visuals: Intel

®

Quick

Sync Video, Intel

®

InTru

TM

3D, Intel

®

Clear Video HD

Technology, Intel

®

HD Graphics 2000/3000, Intel

®

Advanced

Vector Extensions (AVX) with Intel

®

Sandy Bridge CPU

— Pixel Shader 5.0, DirectX 11 with Intel

®

Ivy Bridge CPU.

Pixel Shader 4.1, DirectX 10.1 with Intel

®

Sandy Bridge

CPU.

— Max. shared memory 1760MB with Intel

®

Ivy Bridge CPU.

Max. shared memory 1759MB with Intel

®

Sandy Bridge

CPU.

6

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

— Supports D-Sub with max. resolution up to 2048×1536 @

75Hz

Audio — 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN — H61M-VG3

Realtek PCIE x1 Gigabit LAN RTL8111E,

speed 10/100/1000 Mb/s

— H61M-VS3

Realtek PCIE x1 LAN RTL8105E, speed 10/100 Mb/s

— Supports PXE

Rear Panel I/O I/O Panel

— 1 x PS/2 Mouse Port

— 1 x PS/2 Keyboard Port

— 1 x VGA Port

— 4 x Ready-to-Use USB 2.0 Ports

— 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

— HD Audio Jack: Line in/Front Speaker/Microphone

Connector — 4 x SATA2 3.0 Gb/s connectors, support NCQ, AHCI and

Hot Plug functions

— 1 x Power LED header

— 1 x Chassis Intrusion header

— 1 x CPU Fan connectors (4-pin)

— 1 x Chassis Fan connector (3-pin)

— 24 pin ATX power connector

— 4 pin 12V power connector

— Front panel audio connector

— 2 x USB 2.0 headers (support 4 USB 2.0 ports)

BIOS Feature — 32Mb AMI UEFI Legal BIOS with GUI support

— Supports “Plug and Play”

— ACPI 1.1 Compliance Wake Up Events

— Supports jumperfree

— SMBIOS 2.3.1 Support

Support CD — Drivers, Utilities, AntiVirus Software (Trial Version),

CyberLink MediaEspresso 6.5 Trial, ASRock MAGIX

Multimedia Suite — OEM, Google Chrome Browser and

Toolbar

Hardware — CPU Temperature Sensing

Monitor — Chassis Temperature Sensing

— CPU Fan Tachometer

— Chassis Fan Tachometer

7

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

CAUTION!

1. Due to the operating system limitation, the actual memory size

may be less than 4GB for the reservation for system usage

under Windows

®

8 / 7 / Vista

TM

/ XP. For Windows

®

OS with 64-

bit CPU, there is no such limitation.

You can use ASRock XFast

RAM to utilize the memory that Windows

®

cannot use.

— CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by

CPU Temperature)

— CPU Fan Multi-Speed Control

— CASE OPEN detection

— Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS — Microsoft

®

Windows

®

8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/

Vista

TM

64-bit / XP / XP 64-bit compliant

Certifi cations — FCC, CE, WHQL

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking,

including adjusting the setting in the BIOS, applying Untied Overclocking

Technology, or using third-party overclocking tools. Overclocking may

affect your system’s stability, or even cause damage to the components

and devices of your system. It should be done at your own risk and

expense. We are not responsible for possible damage caused by

overclocking.

8

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

1.3 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap

is placed on pins, the jumper is “Open”. The

illustration shows a 3-pin jumper whose

pin1 and pin2 are “Short” when jumper cap

is placed on these 2 pins.

Jumper Setting Description

Clear CMOS Jumper

(CLRCMOS1)

(see p.2, No. 10)

Note: CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the

system parameters to default setup, please turn off the computer and unplug

the power cord from the power supply. After waiting for 15 seconds, use a

jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However,

please do not clear the CMOS right after you update the BIOS. If you need

to clear the CMOS when you just fi nish updating the BIOS, you must boot up

the system fi rst, and then shut it down before you do the clear-CMOS action.

Please be noted that the password, date, time and user default profi le will be

cleared only if the CMOS battery is removed.

Clear CMOSDefault

If you clear the CMOS, the case open may be detected. Please adjust

the BIOS option “Clear Status” to clear the record of previous chassis

intrusion status.

9

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

1.4 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

Serial ATA2 Connectors These four Serial ATA2

(SATA_0 (PORT 0):

(SATA2) connectors support

see p.2, No. 3)

SATA data cables for internal

(SATA_1 (PORT 1):

storage devices. The current

see p.2, No. 2)

SATA2 interface allows up to

(SATA_2 (PORT 4):

3.0 Gb/s data transfer rate.

see p.2, No. 4)

(SATA_3 (PORT 5):

see p.2, No. 5)

SATA_0 (PORT 0) SATA_2 (PORT 4)

SATA_1 (PORT 1) SATA_3 (PORT 5)

Serial ATA (SATA) Either end of the SATA data

Data Cable cable can be connected to the

(Optional)

SATA / SATA2 hard disk or the

SATA2 connector on this

motherboard.

USB 2.0 Headers Besides four default USB 2.0

(9-pin USB4_5)

ports on the I/O panel, there

(see p.2 No. 7)

are two USB 2.0 headers on

this motherboard. Each

USB 2.0 header can support

two USB 2.0 ports.

(9-pin USB6_7)

(see p.2 No. 6)

10

ASRock H61M-VG3 / H61M-VS3 Motherboard

J_SENSE

OUT2_L

1

MIC_RET

PRESENCE#

GND

OUT2_R

MIC2_R

MIC2_L

OUT_RET

Front Panel Audio Header This is an interface for front

(9-pin HD_AUDIO1)

panel audio cable that allows

(see p.2 No. 17)

convenient connection and

control of audio devices.

1. High Defi nition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. To activate the front mic.

For Windows

®

XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”.

For Windows

®

8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS:

Go to the «FrontMic» Tab in the Realtek Control panel. Adjust

“Recording Volume”.

System Panel Header This header accommodates

(9-pin PANEL1)

several system front panel

(see p.2 No. 12)

functions.

Connect the power switch, reset switch and system status indicator on the

chassis to this header according to the pin assignments below. Note the

positive and negative pins before connecting the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may confi gure

the way to turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset

switch to restart the computer if the computer freezes and fails to perform a

normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED

English

11

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

is on when the system is operating. The LED keeps blinking when the sys-

tem is in S1 sleep state. The LED is off when the system is in S3/S4 sleep

state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED

is on when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly

consists of power switch, reset switch, power LED, hard drive activity LED,

speaker and etc. When connecting your chassis front panel module to this

header, make sure the wire assignments and the pin assign-ments are

matched correctly.

Power LED Header Please connect the chassis

(3-pin PLED1)

power LED to this header to

(see p.2 No. 11)

indicate system power status.

The LED is on when the system

is operating. The LED keeps

blinking in S1 state. The LED is

off in S3/S4 state or S5 state

(power off).

1

PLED+

PLED+

PLED-

Chassis Fan Connector Please connect the fan cables

(3-pin CHA_FAN1)

to the fan connectors and

(see p.2 No. 13)

match the black wire to the

ground pin.

CPU Fan Connectors Please connect the CPU fan

(4-pin CPU_FAN1)

cable to the connector and

(see p.2 No. 19)

match the black wire to the

ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

3-Pin Fan Installation

Pin 1-3 Connected

GND

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

1

2

3

4

12

ASRock H61M-VG3 / H61M-VS3 Motherboard

ATX Power Connector Please connect an ATX power

(24-pin ATXPWR1)

supply to this connector.

(see p.2 No.

20-Pin ATX Power Supply Installation

Though this motherboard provides 24-pin ATX power connector, it can still work if

you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power

supply, please plug your power supply along with Pin 1 and Pin 13.

ATX 12V Power Connector Please connect an ATX 12V

(4-pin ATX12V1)

power supply to this connector.

(see p.2 No. 20)

12 1

24 13

12 1

24 13

Chassis Intrusion Header This motherboard supports

(2-pin CI1)

CASE OPEN detection feature

(see p.2 No. 14)

that detects if the chassis cover

has been removed. This feature

requires a chassis with chassis

intrusion detection design.

1

Signal

GND

English

13

ASRock H61M-VG3 / H61M-VS3 Motherboard

English

2. BIOS Information

The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up

the computer, please press <F2> or <Del> during the Power-On-Self-Test (POST)

to enter BIOS Setup utility; otherwise, POST continues with its test routines. If you

wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl>

+ <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS

Setup program is designed to be user-friendly. It is a menu-driven program, which

allows you to scroll through its various sub-menus and to select among the prede-

termined choices. For the detailed information about BIOS Setup, please refer to the

User Manual (PDF fi le) contained in the Support CD.

3. Software Support CD information

This motherboard supports various Microsoft

®

Windows

®

operating systems: 8 / 8

64-bit / 7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit / XP / XP 64-bit. The Support CD that

came with the motherboard contains necessary drivers and useful utilities that will

enhance motherboard features. To begin using the Support CD, insert the CD into

your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is

enabled in your computer. If the Main Menu does not appear automatically, locate

and double-click on the fi le “ASSETUP.EXE” from the BIN folder in the Support CD

to display the menus.

14

ASRock H61M-VG3 / H61M-VS3 Motherboard

Spezifi kationen

Plattform — Micro ATX-Formfaktor

— Alle Feste Kondensatordesign (H61M-VG3)

— Festkondensator für CPU-Leistung (H61M-VS3)

CPU — Unterstützt Intel

®

Core

TM

i7- / i5- / i3-Prozessoren der 3ten

und 2ten Generation im LGA1155-Package

— Unterstützt Intel

®

Turbo Boost 2.0-Technologie

— Unterstützt freigegebene CPU der K-Serie

Chipsatz — Intel

®

H61

— Unterstützt Intel

®

Rapid Start Technology und Smart

Connect Technology

Speicher — Unterstützung von Dual-Kanal-Speichertechnologie

— 2 x Steckplätze für DDR3

— Unterstützt DDR3 1600/1333/1066 non-ECC, ungepufferter

Speicher (DDR3 1600 mit Intel

®

Ivy Bridge-Prozessor,

DDR3 1333 mit Intel

®

Sandy Bridge-Prozessor)

— Max. Kapazität des Systemspeichers: 16GB

— Unterstützt Intel

®

Extreme Memory Profi le (XMP)1.3/1.2 mit

Intel

®

Ivy Bridge-Prozessor

Erweiterungs- — 1 x PCI Express 3.0 x16-Steckplatz (blau für x16-Modus)

steckplätze * PCIE 3.0 wird nur mit Intel

®

Ivy Bridge-Prozessor

unterstützt. Mit Intel

®

Sandy Bridge-Prozessor wird nur

PCIE 2.0 unterstützt.

— 1 x PCI Express 2.0 x1-Steckplätze

Onboard-VGA * Integrierte Intel

®

HD-Grafi kdarstellungen und die VGA-

Ausgänge können nur durch GPU-integrierte Prozessoren

unterstützt werden.

— Unterstützt hochaufl ösende integrierte Intel

®

-Grafi klösungen:

Intel

®

Quick-Sync-Video 2.0, Intel

®

InTru

TM

3D, Intel

®

Clear-

Video-Technik (HD), Intel

®

Insider

TM

, Intel

®

HD Graphics

2500/4000 mit Intel

®

Ivy Bridge-Prozessor

— Unterstützt hochaufl ösende integrierte Intel

®

-Grafi klösungen:

Intel

®

Quick-Sync-Video, Intel

®

InTru

TM

3D, Intel

®

Clear-

Video-Technik (HD), Intel

®

HD Graphics 2000/3000, Intel

®

Advanced Vector Extensions (AVX) mit Intel

®

Sandy Bridge-

Prozessor

— Pixel Shader 5.0, DirectX 11 mit Intel

®

Ivy Bridge-Prozessor,

Pixel Shader 4.1, DirectX 10.1 mit Intel

®

Sandy Bridge-

Prozessor

— Maximal gemeinsam genutzter Speicher 1760MB mit Intel

®

Deutsch

15

ASRock H61M-VG3 / H61M-VS3 Motherboard

Deutsch

Ivy Bridge-Prozessor. Maximal gemeinsam genutzter

Speicher 1759MB mit Intel

®

Sandy Bridge-Prozessor.

— Unterstützt D-Sub mit einer maximalen Aufl ösung von

2048 x 1536 bei 75 Hz

Audio — 5.1

CH HD Audio (Realtek ALC662 Audio Codec)

LAN — H61M-VG3

Realtek PCIE x1 Gigabit LAN RTL8111E,

speed 10/100/1000 Mb/s

— H61M-VS3

Realtek PCIE x1 LAN RTL8105E, speed 10/100 Mb/s

— Unterstützt PXE

E/A-Anschlüsse I/O Panel

an der — 1 x PS/2-Mausanschluss

Rückseite — 1 x PS/2-Tastaturanschluss

— 1 x VGA port

— 4 x Standard-USB 2.0-Anschlüsse

— 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED

LED)

— HD Audiobuchse: Audioeingang / Lautsprecher vorne /

Mikrofon

Anschlüsse — 4 x SATA2 3,0 GB/s-Anschlüsse, unterstützen NCQ-, AHCI-

und „Hot Plug“ (Hot-Plugging)- Funktionen

— 1 x Betriebs-LED-Header

— 1 x Verteiler für Gehäuseeindringversuche

— 1 x CPUlüfter-Anschluss (4-pin)

— 1 x Gehäuselüfter-Anschluss (3-pin)

— 24-pin ATX-Netz-Header

— 4-pin anschluss für 12V-ATX-Netzteil

— Anschluss für Audio auf der Gehäusevorderseite

— 2 x USB 2.0-Anschlüsse (Unterstützung 4 zusätzlicher

USB 2.0-Anschlüsse)

BIOS — 32Mb AMIs Legal BIOS UEFI mit GUI-Unterstützung

— Unterstützung für “Plug and Play”

— ACPI 1.1-Weckfunktionen

— JumperFree-Übertaktungstechnologie

— SMBIOS 2.3.1

CD d’assistance — Pilotes, utilitaires, logiciel anti-virus (version d’évaluation),

CyberLink MediaEspresso 6.5 Trial, ASRock MAGIX-

Multimedia-Suite — OEM, Google Chrome Browser und

Toolbar

Прежде всего здесь мы найдем ответы касательно конструкции, возможностей устройства Asrock H61M-VG3, использования отдельных аксессуаров и ряд информации, позволяющей вполне использовать все функции и упрощения.

После удачной покупки оборудования/устройства стоит посвятить несколько минут для ознакомления с каждой частью инструкции Asrock H61M-VG3. Сейчас их старательно готовят или переводят, чтобы они были не только понятными для пользователя, но и чтобы выполняли свою основную информационно-поддерживающую функцию.