-
Страница 1
1 1 1 1 1 960GM-GS3 FX / 960GM-S3 FX User Ma nual V ersion 1.0 Published September 201 1 Copyright©201 1 ASRock INC. All rights reserved.[…]
-
Страница 2
2 2 2 2 2 Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purcha ser for ba ckup purpose, without written consent of ASRock Inc. Products[…]
-
Страница 3
3 3 3 3 3 Contents Contents Contents Contents Contents 1. 1. 1. 1. 1. Introduction Introduction Introduction Introduction Introduction ………………………………………………….. ………………………………………………….. ………………………………………………….. ……………………………..[…]
-
Страница 4
4 4 4 4 4 3. 3. 3. 3. 3. BIOS S BIOS S BIOS S BIOS S BIOS S ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY …………………………………………… …………………………………………… …………………………………………… …………………………………………… ……………..[…]
-
Страница 5
5 5 5 5 5 1. 1. 1. 1. 1. Introduction Introduction Introduction Introduction Introduction Tha nk you for purcha sing ASRock 960GM-GS3 FX / 960GM-S3 FX motherboard, a relia ble motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performa nce with robust design conf orming to ASRock’s com- mitment to […]
-
Страница 6
6 6 6 6 6 1.2 1.2 1.2 1.2 1.2 Specifications Specifications Specifications Specifications Specifications Platform — Micro A TX Form Fa ctor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm — Solid Ca pacitor f or CPU power CPU — Support for Socket AM3+ processors — Support f or Socket AM3 proce ssors: AMD Phenom TM II X6 / X4 / X3 / X2 (except 920 / 940) / Athl[…]
-
Страница 7
7 7 7 7 7 Rear Panel I/O I/O Panel — 1 x PS/2 Mouse Port — 1 x PS/2 Keyboard Port — 1 x Serial Port: COM1 — 1 x V GA Port — 4 x Ready-to-Use USB 2.0 Ports — 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) — HD Audio Jack: Line in / Front Spea ker / Microphone Connector — 4 x SA T A2 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10[…]
-
Страница 8
8 8 8 8 8 WARNING Plea se realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, a pplying U ntied Overclocking T e chnology , or using the third- party overclocking tools. Overclocking may affect your system stability, or even cause da mage to the components and devices of your system. It shou[…]
-
Страница 9
9 9 9 9 9 7. It is a user-friendly ASRock overclocking tool which allows you to surve il your system by hardware monitor function a nd overclock your hardware devices to get the best system perf ormance under Windows ® environment. Plea se visit our website for the operation procedures of ASRock OC T uner . ASRock website: http://www .a srock.com […]
-
Страница 10
10 10 10 10 10 12. SmartView, a new function of internet browser, is the smart start page for IE that combines your most visited web sites, your history, your Fa cebook friends and your re al-ti me newsfeed into a n enhanced view for a more person al Internet experience. ASRock motherboards are exclusively equipped with the SmartView utility that h[…]
-
Страница 11
11 11 11 11 11 1.3 Motherboard L 1.3 Motherboard L 1.3 Motherboard L 1.3 Motherboard L 1.3 Motherboard L ayout (960GM- ayout (960GM- ayout (960GM- ayout (960GM- ayout (960GM- GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) 1 PS2_USB_PW1 Jumper 1 5 System Pa nel He ader (P ANEL1, White) 2[…]
-
Страница 12
12 12 12 12 12 1.4 I/O P 1.4 I/O P 1.4 I/O P 1.4 I/O P 1.4 I/O P anel (960GM- anel (960GM- anel (960GM- anel (960GM- anel (960GM- GS3 FX) GS3 FX) GS3 FX) GS3 FX) GS3 FX) 1 PS/2 Mouse Port (Green) 6 Microphone (Pink) 2 USB 2.0 Ports (USB23) 7 USB 2.0 Ports (USB01) * 3 RJ-45 Port 8 V GA Port 4 Line In (Light Blue) 9 COM Port 5 Line Out (Lime) 1 0 PS/[…]
-
Страница 13
13 13 13 13 13 1.5 I/O P 1.5 I/O P 1.5 I/O P 1.5 I/O P 1.5 I/O P anel (960GM-S3 FX) anel (960GM-S3 FX) anel (960GM-S3 FX) anel (960GM-S3 FX) anel (960GM-S3 FX) 1 PS/2 Mouse Port (Green) 6 Microphone (Pink) 2 USB 2.0 Ports (USB23) 7 USB 2.0 Ports (USB01) * 3 RJ-45 Port 8 V GA Port 4 Line In (Light Blue) 9 COM Port 5 Line Out (Lime) 1 0 PS/2 Keyboard[…]
-
Страница 14
14 14 14 14 14 2. 2. 2. 2. 2. Installation Installation Installation Installation Installation This is a Micro A TX form fa ctor (9.6-in x 7.2-in, 24.4 cm x 18.3 cm) motherboard. Before you install the motherboard, study the conf iguration of your cha ssis to en- sure that the motherboard fits into it. Pre-installation Precautions Pre-installation […]
-
Страница 15
15 15 15 15 15 2.1 2.1 2.1 2.1 2.1 CPU Installation CPU Installation CPU Installation CPU Installation CPU Installation Step 1. Unlock the socket by lifting the lever up to a 90 o a ngle. Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3. Care[…]
-
Страница 16
16 16 16 16 16 2.3 Installation of Memor 2.3 Installation of Memor 2.3 Installation of Memor 2.3 Installation of Memor 2.3 Installation of Memor y Modules (DIMM) y Modules (DIMM) y Modules (DIMM) y Modules (DIMM) y Modules (DIMM) 960GM-GS3 FX / 960GM-S3 FX motherboard provides two 240-pin D D R3 (Double Data Rate 3) DIMM slots, a nd supports Dual C[…]
-
Страница 17
17 17 17 17 17 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are use[…]
-
Страница 18
18 18 18 18 18 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature This motherboard supports multi monitor feature. With the internal V GA output support a nd the external add-on PCI Express V GA card, you can ea sily enjoy the benefits of multi monitor feature. Plea se r[…]
-
Страница 19
19 19 19 19 19 E. Right-click the display icon a nd select “Atta ched”, if necessary . F . Set the “Screen Resolution” a nd “Color Quality” a s a ppropriate f or the second monitor . Click “Apply” or “OK” to a pply these new values . G. Repeat steps C through E f or the dia play icon identified by the number one, two and three. […]
-
Страница 20
20 20 20 20 20 +5V 1_2 +5VSB 2_3 2.6 2.6 2.6 2.6 2.6 Jumpers Setup Jumpers Setup Jumpers Setup Jumpers Setup Jumpers Setup The illustration shows how jumpers are setup. When the jumper ca p is placed on pin s, the jumper is “Short”. If no jumper ca p is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 a[…]
-
Страница 21
21 21 21 21 21 FLOPPY 1 Pin 1 the red-striped side to Pin1 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper ca ps over these hea ders a nd connectors. Placi[…]
-
Страница 22
22 22 22 22 22 J_SENSE OUT2_L 1 MIC_RET PRESENCE# GND OUT2_R MIC2_R MIC2_L OUT_RET Front Pa nel Audio He ader This is a n interfa ce for the front (9-pin HD_AUDIO1) pa nel audio cable that allows (see p.1 1, No. 23) convenient connection and control of audio devices. USB 2.0 Headers Besides four default USB 2.0 (9-pin USB6_7) ports on the I/O panel[…]
-
Страница 23
23 23 23 23 23 20-Pin A TX Power Supply Installation Though this motherboard provide s 24-pin A TX power connector , it ca n still work if you adopt a traditional 20-pin ATX power supply . T o use the 20-pin A TX power supply , plea se plug your power supply along with Pin 1 a nd Pin 13. A TX Power Connector Plea se connect a n A TX power (24-pin A[…]
-
Страница 24
24 24 24 24 24 A TX 12V Power Connector Plea se conne ct a n A TX 12V (4-pin A TX12V1) power supply to this connector. (see p.1 1 No. 2)[…]
-
Страница 25
25 25 25 25 25 2.8 2.8 2.8 2.8 2.8 SA SA SA SA SA T T T T T AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide Before installing SA T AII hard disk to your computer , plea se carefully read below SA T AII hard disk setup guide. Some default setting of SA T AII hard disks[…]
-
Страница 26
26 26 26 26 26 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F unctions for SA unctions for SA unctions for SA unctions for SA unctions for SA T T T T T A / SA A / SA A / SA A / SA A / SA T T T T T AII AII AII AII AII HDDs HDDs HDDs HDDs HDDs This mothe[…]
-
Страница 27
27 27 27 27 27 Caution 1. Without SA T A 15-pin power conne ctor interface, the SA T A / SA T AII Hot Plug cannot be processed. 2. Even some SA T A / SA T AII HDDs provide both SA T A 15-pin power conne ctor a nd IDE 1×4-pin conventional power connector interfa ces, the IDE 1×4-pin conventional power connector interfa ce is definitely not able to s[…]
-
Страница 28
28 28 28 28 28 How to Hot Plug a SA T A / SA T AII HDD: Points of attention, before you process the Hot Plug: Plea se do follow below instruction sequence to process the Hot Plug, i mproper procedure will cause the SA T A / SA T AII HDD da mage a nd data loss. Connect SA T A data cable to the motherboard’s SA TAII conne ctor . Connect SA T A 15-p[…]
-
Страница 29
29 29 29 29 29 2.12 2.12 2.12 2.12 2.12 Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide T o install the drivers to your system, plea se insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on th[…]
-
Страница 30
30 30 30 30 30 NOTE. If you install Windows ® XP / XP 64-bit on IDE HDDs and want to manage (create, convert, delete, or rebuild) RAID functions on SA T A / SA T AII HDDs, you still need to set up “SA T A Operation Mode” to [RAID] first. Then, ple a se set the RAID conf iguration by using the Windows RAID installation guide in the following pa[…]
-
Страница 31
31 31 31 31 31 NOTE1. If you install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit on IDE HDDs and want to man age (create, convert, delete, or rebuild) RAID functions on SA T A / SA T AII HDDs, you still need to set up “SA T A Operation Mode” to [RAID] in BIOS f irst. Then, plea se set the RAID configuration by using the Windows RAID in[…]
-
Страница 32
32 32 32 32 32 Using SA T A / SA T AII HDDs without NCQ a nd Hot Plug functions (IDE mode) STEP 1: Set up BIOS. A . Enter BIOS SETUP UTILITY Adva nced screen Storage Configuration. B. Set the “SA T A Operation Mode” option to [IDE]. STEP 2: Install Windows ® XP / XP 64-bit OS on your system. 2.14.2 Installing Windows 2.14.2 Installing Windows […]
-
Страница 33
33 33 33 33 33 2.15 2.15 2.15 2.15 2.15 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T echnology echnology echnology echnology echnology This motherboard supports U ntied Overclocking T echnology , which mean s during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses.[…]
-
Страница 34
34 34 34 34 34 3. 3. 3. 3. 3. BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system. The SPI Memory on the motherboard stores the BIOS SETUP UT[…]
-
Страница 35
35 35 35 35 35 BIOS SETUP UTILITY Main OC Tweaker H/W Monitor Boot Security Exit Advanced Use [Enter], [T AB] or [SHIFT -T AB] to select a field. Use [+] or [-] to configure system Time. Select Screen Select Item +- Change Field T ab Select Field F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Me[…]
-
Страница 36
36 36 36 36 36 3.3 3.3 3.3 3.3 3.3 OC T OC T OC T OC T OC T weak weak weak weak weak er Screen er Screen er Screen er Screen er Screen In the OC T weaker screen, you ca n set up overclocking features. BIOS SETUP UTILITY Main Advanced H/W Monitor Boot Security Exit Overclocking may cause damage to your CPU and motherboard. It should be done at your […]
-
Страница 37
37 37 37 37 37 Load Optimized mGPU OC Setting Y ou ca n use this option to load mGPU overclocking setting. Plea se note that overclocing may cause da mage to your mGPU and motherboard. It should be done at your own risk a nd expense. CPU Configuration Overclock Mode Use this to select Overclock Mode. The default value is [Auto]. Configuration optio[…]
-
Страница 38
38 38 38 38 38 BIOS SETUP UTILITY Main Advanced H/W Monitor Boot Security Exit Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, In[…]
-
Страница 39
39 39 39 39 39 BIOS SETUP UTILITY Memory Timing Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. OC Tweaker Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit Bank Interleaving Channel I[…]
-
Страница 40
40 40 40 40 40 TRRD Use this to adjust TRRD values. The default value is [Auto]. TWTR Use this to adjust TWTR values. The default value is [Auto]. TRTP Use this to adjust TRTP values. The default value is [Auto]. TF A W Use this to adjust TFA W value s. The default value is [Auto]. Chipset Settings Onboard GPU Clock Override This allows you to ena […]
-
Страница 41
41 41 41 41 41 3.4 3.4 3.4 3.4 3.4 Advanced Screen Advanced Screen Advanced Screen Advanced Screen Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chi pset Configuration, ACPI Configuration, Storage Conf iguration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB […]
-
Страница 42
42 42 42 42 42 3.4.1 3.4.1 3.4.1 3.4.1 3.4.1 CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Configuration BIOS SETUP UTILITY CPU Configuration Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Select S[…]
-
Страница 43
43 43 43 43 43 BIOS SETUP UTILITY v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Chipset Settings Onboard HD Audio Front Panel Onboard Lan Dr . LAN Primary Graphics Adapter Internal Graphics Mode Share Memory [Disabled] [Auto] [Auto] [Enabled] [UMA] [Auto] [Disabled] [PCI] Select Screen Select Item + — Change Option F1 General Help F10 S[…]
-
Страница 44
44 44 44 44 44 BIOS SETUP UTILITY ACPI Settings Select auto-detect or disable the STR feature. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Suspend T o RAM Check Ready Bit A way Mode Support Restore on AC / Power Loss Ring-In[…]
-
Страница 45
45 45 45 45 45 BIOS SETUP UTILITY Storage Configuration v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Onboard SAT A Controller SA T A Operation Mode IDE1 Master IDE1 Slave SA T AII_1 SA T AII_2 SA T AII_3 SA T AII_4 [Enabled] [IDE] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Select Scr[…]
-
Страница 46
46 46 46 46 46 TYPE Use this item to configure the type of the IDE device that you specify. Configuration options: [Not In stalled], [Auto], [CD/D V D], a nd [ARMD]. [Not Installed]: Select [Not Installed] to disable the use of IDE device. [Auto]: Select [Auto] to automatically detect the hard disk drive. After selecting the hard disk information i[…]
-
Страница 47
47 47 47 47 47 BIOS SETUP UTILITY Advanced PCI / PnP Settings V alue in units of PCI clocks for PCI device latency timer regi ster . Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. PCI Latency Timer PCI IDE BusMaster [32] [Enabled] Advan[…]
-
Страница 48
48 48 48 48 48 BIOS SETUP UTILITY Floppy Configuration Select the type of floppy drive connected to the system. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Floppy A [1.44 MB 3 «] 1 2 BIOS SETUP UTILITY Configure Super I[…]
-
Страница 49
49 49 49 49 49 Parallel Port Mode Use this item to set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, “EPP Version”. Conf iguration options: [Normal], [Bi-Directional], and [ECP+EPP]. EPP V ersion Use this item to set the EPP versio[…]
-
Страница 50
50 50 50 50 50 BIOS SETUP UTILITY USB Configuration T o enable or disable the onboard USB controllers. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Advanced USB Controller USB 2.0 Support Legacy USB Support USB Keyboard/Remote Power O[…]
-
Страница 51
51 51 51 51 51 BIOS SETUP UTILITY Hardware Health Event Monitoring Select Screen Select Item F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. CPU T emperature M / B T emperature CPU Fan Speed Chassis Fan Speed Vcore + 3.30V + 5.00V + 12.00V Power Fan Speed : 3 7C/9 8F : 4722 RPM :[…]
-
Страница 52
52 52 52 52 52 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Security Exit Boot Settings Configure Settings during System Boot. Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Boot Boot Settings Configuration 1st Boot De[…]
-
Страница 53
53 53 53 53 53 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Exit Install or Change the password. Select Screen Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Security Change Supervisor Password Change User Password Security Settings Supe[…]
-
Страница 54
54 54 54 54 54 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Security Exit system setup after saving the changes. F10 key can be used for this operation. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Exit Save Cha[…]
-
Страница 55
55 55 55 55 55 4. 4. 4. 4. 4. Sof Sof Sof Sof Sof tware Suppor tware Suppor tware Suppor tware Suppor tware Suppor t t t t t 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System This motherboard supports various Microsoft ® Windows ® operating systems: 7 /[…]
Скачать
8 1
8 1
8 1
8 1
8 1
ASRock
960GM-GS3 FX / 960GM-S3 FX
Motherboard
-
Page 1: Asrock 960GM-GS3 FX
1 1 1 1 1 960GM-GS3 FX / 960GM-S3 FX User Ma nual V ersion 1.0 Published September 201 1 Copyright©201 1 ASRock INC. All rights reserved.[…]
-
Page 2: Asrock 960GM-GS3 FX
2 2 2 2 2 Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purcha ser for ba ckup purpose, without written consent of ASRock Inc. Products[…]
-
Page 3: Asrock 960GM-GS3 FX
3 3 3 3 3 Contents Contents Contents Contents Contents 1. 1. 1. 1. 1. Introduction Introduction Introduction Introduction Introduction ………………………………………………….. ………………………………………………….. ………………………………………………….. ……………………………..[…]
-
Page 4: Asrock 960GM-GS3 FX
4 4 4 4 4 3. 3. 3. 3. 3. BIOS S BIOS S BIOS S BIOS S BIOS S ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY …………………………………………… …………………………………………… …………………………………………… …………………………………………… ……………..[…]
-
Page 5: Asrock 960GM-GS3 FX
5 5 5 5 5 1. 1. 1. 1. 1. Introduction Introduction Introduction Introduction Introduction Tha nk you for purcha sing ASRock 960GM-GS3 FX / 960GM-S3 FX motherboard, a relia ble motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performa nce with robust design conf orming to ASRock’s com- mitment to […]
-
Page 6: Asrock 960GM-GS3 FX
6 6 6 6 6 1.2 1.2 1.2 1.2 1.2 Specifications Specifications Specifications Specifications Specifications Platform — Micro A TX Form Fa ctor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm — Solid Ca pacitor f or CPU power CPU — Support for Socket AM3+ processors — Support f or Socket AM3 proce ssors: AMD Phenom TM II X6 / X4 / X3 / X2 (except 920 / 940) / Athl[…]
-
Page 7: Asrock 960GM-GS3 FX
7 7 7 7 7 Rear Panel I/O I/O Panel — 1 x PS/2 Mouse Port — 1 x PS/2 Keyboard Port — 1 x Serial Port: COM1 — 1 x V GA Port — 4 x Ready-to-Use USB 2.0 Ports — 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) — HD Audio Jack: Line in / Front Spea ker / Microphone Connector — 4 x SA T A2 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10[…]
-
Page 8: Asrock 960GM-GS3 FX
8 8 8 8 8 WARNING Plea se realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, a pplying U ntied Overclocking T e chnology , or using the third- party overclocking tools. Overclocking may affect your system stability, or even cause da mage to the components and devices of your system. It shou[…]
-
Page 9: Asrock 960GM-GS3 FX
9 9 9 9 9 7. It is a user-friendly ASRock overclocking tool which allows you to surve il your system by hardware monitor function a nd overclock your hardware devices to get the best system perf ormance under Windows ® environment. Plea se visit our website for the operation procedures of ASRock OC T uner . ASRock website: http://www .a srock.com […]
-
Page 10: Asrock 960GM-GS3 FX
10 10 10 10 10 12. SmartView, a new function of internet browser, is the smart start page for IE that combines your most visited web sites, your history, your Fa cebook friends and your re al-ti me newsfeed into a n enhanced view for a more person al Internet experience. ASRock motherboards are exclusively equipped with the SmartView utility that h[…]
-
Page 11: Asrock 960GM-GS3 FX
11 11 11 11 11 1.3 Motherboard L 1.3 Motherboard L 1.3 Motherboard L 1.3 Motherboard L 1.3 Motherboard L ayout (960GM- ayout (960GM- ayout (960GM- ayout (960GM- ayout (960GM- GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) GS3 FX / 960GM-S3 FX) 1 PS2_USB_PW1 Jumper 1 5 System Pa nel He ader (P ANEL1, White) 2[…]
-
Page 12: Asrock 960GM-GS3 FX
12 12 12 12 12 1.4 I/O P 1.4 I/O P 1.4 I/O P 1.4 I/O P 1.4 I/O P anel (960GM- anel (960GM- anel (960GM- anel (960GM- anel (960GM- GS3 FX) GS3 FX) GS3 FX) GS3 FX) GS3 FX) 1 PS/2 Mouse Port (Green) 6 Microphone (Pink) 2 USB 2.0 Ports (USB23) 7 USB 2.0 Ports (USB01) * 3 RJ-45 Port 8 V GA Port 4 Line In (Light Blue) 9 COM Port 5 Line Out (Lime) 1 0 PS/[…]
-
Page 13: Asrock 960GM-GS3 FX
13 13 13 13 13 1.5 I/O P 1.5 I/O P 1.5 I/O P 1.5 I/O P 1.5 I/O P anel (960GM-S3 FX) anel (960GM-S3 FX) anel (960GM-S3 FX) anel (960GM-S3 FX) anel (960GM-S3 FX) 1 PS/2 Mouse Port (Green) 6 Microphone (Pink) 2 USB 2.0 Ports (USB23) 7 USB 2.0 Ports (USB01) * 3 RJ-45 Port 8 V GA Port 4 Line In (Light Blue) 9 COM Port 5 Line Out (Lime) 1 0 PS/2 Keyboard[…]
-
Page 14: Asrock 960GM-GS3 FX
14 14 14 14 14 2. 2. 2. 2. 2. Installation Installation Installation Installation Installation This is a Micro A TX form fa ctor (9.6-in x 7.2-in, 24.4 cm x 18.3 cm) motherboard. Before you install the motherboard, study the conf iguration of your cha ssis to en- sure that the motherboard fits into it. Pre-installation Precautions Pre-installation […]
-
Page 15: Asrock 960GM-GS3 FX
15 15 15 15 15 2.1 2.1 2.1 2.1 2.1 CPU Installation CPU Installation CPU Installation CPU Installation CPU Installation Step 1. Unlock the socket by lifting the lever up to a 90 o a ngle. Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3. Care[…]
-
Page 16: Asrock 960GM-GS3 FX
16 16 16 16 16 2.3 Installation of Memor 2.3 Installation of Memor 2.3 Installation of Memor 2.3 Installation of Memor 2.3 Installation of Memor y Modules (DIMM) y Modules (DIMM) y Modules (DIMM) y Modules (DIMM) y Modules (DIMM) 960GM-GS3 FX / 960GM-S3 FX motherboard provides two 240-pin D D R3 (Double Data Rate 3) DIMM slots, a nd supports Dual C[…]
-
Page 17: Asrock 960GM-GS3 FX
17 17 17 17 17 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are use[…]
-
Page 18: Asrock 960GM-GS3 FX
18 18 18 18 18 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature 2.5 Multi Monitor Feature This motherboard supports multi monitor feature. With the internal V GA output support a nd the external add-on PCI Express V GA card, you can ea sily enjoy the benefits of multi monitor feature. Plea se r[…]
-
Page 19: Asrock 960GM-GS3 FX
19 19 19 19 19 E. Right-click the display icon a nd select “Atta ched”, if necessary . F . Set the “Screen Resolution” a nd “Color Quality” a s a ppropriate f or the second monitor . Click “Apply” or “OK” to a pply these new values . G. Repeat steps C through E f or the dia play icon identified by the number one, two and three. […]
-
Page 20: Asrock 960GM-GS3 FX
20 20 20 20 20 +5V 1_2 +5VSB 2_3 2.6 2.6 2.6 2.6 2.6 Jumpers Setup Jumpers Setup Jumpers Setup Jumpers Setup Jumpers Setup The illustration shows how jumpers are setup. When the jumper ca p is placed on pin s, the jumper is “Short”. If no jumper ca p is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 a[…]
-
Page 21: Asrock 960GM-GS3 FX
21 21 21 21 21 FLOPPY 1 Pin 1 the red-striped side to Pin1 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors 2.7 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper ca ps over these hea ders a nd connectors. Placi[…]
-
Page 22: Asrock 960GM-GS3 FX
22 22 22 22 22 J_SENSE OUT2_L 1 MIC_RET PRESENCE# GND OUT2_R MIC2_R MIC2_L OUT_RET Front Pa nel Audio He ader This is a n interfa ce for the front (9-pin HD_AUDIO1) pa nel audio cable that allows (see p.1 1, No. 23) convenient connection and control of audio devices. USB 2.0 Headers Besides four default USB 2.0 (9-pin USB6_7) ports on the I/O panel[…]
-
Page 23: Asrock 960GM-GS3 FX
23 23 23 23 23 20-Pin A TX Power Supply Installation Though this motherboard provide s 24-pin A TX power connector , it ca n still work if you adopt a traditional 20-pin ATX power supply . T o use the 20-pin A TX power supply , plea se plug your power supply along with Pin 1 a nd Pin 13. A TX Power Connector Plea se connect a n A TX power (24-pin A[…]
-
Page 24: Asrock 960GM-GS3 FX
24 24 24 24 24 A TX 12V Power Connector Plea se conne ct a n A TX 12V (4-pin A TX12V1) power supply to this connector. (see p.1 1 No. 2)[…]
-
Page 25: Asrock 960GM-GS3 FX
25 25 25 25 25 2.8 2.8 2.8 2.8 2.8 SA SA SA SA SA T T T T T AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide Before installing SA T AII hard disk to your computer , plea se carefully read below SA T AII hard disk setup guide. Some default setting of SA T AII hard disks[…]
-
Page 26: Asrock 960GM-GS3 FX
26 26 26 26 26 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F 2.10 Hot Plug and Hot Swap F unctions for SA unctions for SA unctions for SA unctions for SA unctions for SA T T T T T A / SA A / SA A / SA A / SA A / SA T T T T T AII AII AII AII AII HDDs HDDs HDDs HDDs HDDs This mothe[…]
-
Page 27: Asrock 960GM-GS3 FX
27 27 27 27 27 Caution 1. Without SA T A 15-pin power conne ctor interface, the SA T A / SA T AII Hot Plug cannot be processed. 2. Even some SA T A / SA T AII HDDs provide both SA T A 15-pin power conne ctor a nd IDE 1×4-pin conventional power connector interfa ces, the IDE 1×4-pin conventional power connector interfa ce is definitely not able to s[…]
-
Page 28: Asrock 960GM-GS3 FX
28 28 28 28 28 How to Hot Plug a SA T A / SA T AII HDD: Points of attention, before you process the Hot Plug: Plea se do follow below instruction sequence to process the Hot Plug, i mproper procedure will cause the SA T A / SA T AII HDD da mage a nd data loss. Connect SA T A data cable to the motherboard’s SA TAII conne ctor . Connect SA T A 15-p[…]
-
Page 29: Asrock 960GM-GS3 FX
29 29 29 29 29 2.12 2.12 2.12 2.12 2.12 Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide Driver Installation Guide T o install the drivers to your system, plea se insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on th[…]
-
Page 30: Asrock 960GM-GS3 FX
30 30 30 30 30 NOTE. If you install Windows ® XP / XP 64-bit on IDE HDDs and want to manage (create, convert, delete, or rebuild) RAID functions on SA T A / SA T AII HDDs, you still need to set up “SA T A Operation Mode” to [RAID] first. Then, ple a se set the RAID conf iguration by using the Windows RAID installation guide in the following pa[…]
-
Page 31: Asrock 960GM-GS3 FX
31 31 31 31 31 NOTE1. If you install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit on IDE HDDs and want to man age (create, convert, delete, or rebuild) RAID functions on SA T A / SA T AII HDDs, you still need to set up “SA T A Operation Mode” to [RAID] in BIOS f irst. Then, plea se set the RAID configuration by using the Windows RAID in[…]
-
Page 32: Asrock 960GM-GS3 FX
32 32 32 32 32 Using SA T A / SA T AII HDDs without NCQ a nd Hot Plug functions (IDE mode) STEP 1: Set up BIOS. A . Enter BIOS SETUP UTILITY Adva nced screen Storage Configuration. B. Set the “SA T A Operation Mode” option to [IDE]. STEP 2: Install Windows ® XP / XP 64-bit OS on your system. 2.14.2 Installing Windows 2.14.2 Installing Windows […]
-
Page 33: Asrock 960GM-GS3 FX
33 33 33 33 33 2.15 2.15 2.15 2.15 2.15 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T echnology echnology echnology echnology echnology This motherboard supports U ntied Overclocking T echnology , which mean s during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses.[…]
-
Page 34: Asrock 960GM-GS3 FX
34 34 34 34 34 3. 3. 3. 3. 3. BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction 3.1 Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system. The SPI Memory on the motherboard stores the BIOS SETUP UT[…]
-
Page 35: Asrock 960GM-GS3 FX
35 35 35 35 35 BIOS SETUP UTILITY Main OC Tweaker H/W Monitor Boot Security Exit Advanced Use [Enter], [T AB] or [SHIFT -T AB] to select a field. Use [+] or [-] to configure system Time. Select Screen Select Item +- Change Field T ab Select Field F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Me[…]
-
Page 36: Asrock 960GM-GS3 FX
36 36 36 36 36 3.3 3.3 3.3 3.3 3.3 OC T OC T OC T OC T OC T weak weak weak weak weak er Screen er Screen er Screen er Screen er Screen In the OC T weaker screen, you ca n set up overclocking features. BIOS SETUP UTILITY Main Advanced H/W Monitor Boot Security Exit Overclocking may cause damage to your CPU and motherboard. It should be done at your […]
-
Page 37: Asrock 960GM-GS3 FX
37 37 37 37 37 Load Optimized mGPU OC Setting Y ou ca n use this option to load mGPU overclocking setting. Plea se note that overclocing may cause da mage to your mGPU and motherboard. It should be done at your own risk a nd expense. CPU Configuration Overclock Mode Use this to select Overclock Mode. The default value is [Auto]. Configuration optio[…]
-
Page 38: Asrock 960GM-GS3 FX
38 38 38 38 38 BIOS SETUP UTILITY Main Advanced H/W Monitor Boot Security Exit Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, In[…]
-
Page 39: Asrock 960GM-GS3 FX
39 39 39 39 39 BIOS SETUP UTILITY Memory Timing Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. OC Tweaker Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit Bank Interleaving Channel I[…]
-
Page 40: Asrock 960GM-GS3 FX
40 40 40 40 40 TRRD Use this to adjust TRRD values. The default value is [Auto]. TWTR Use this to adjust TWTR values. The default value is [Auto]. TRTP Use this to adjust TRTP values. The default value is [Auto]. TF A W Use this to adjust TFA W value s. The default value is [Auto]. Chipset Settings Onboard GPU Clock Override This allows you to ena […]
-
Page 41: Asrock 960GM-GS3 FX
41 41 41 41 41 3.4 3.4 3.4 3.4 3.4 Advanced Screen Advanced Screen Advanced Screen Advanced Screen Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chi pset Configuration, ACPI Configuration, Storage Conf iguration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB […]
-
Page 42: Asrock 960GM-GS3 FX
42 42 42 42 42 3.4.1 3.4.1 3.4.1 3.4.1 3.4.1 CPU Configuration CPU Configuration CPU Configuration CPU Configuration CPU Configuration BIOS SETUP UTILITY CPU Configuration Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Select S[…]
-
Page 43: Asrock 960GM-GS3 FX
43 43 43 43 43 BIOS SETUP UTILITY v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Chipset Settings Onboard HD Audio Front Panel Onboard Lan Dr . LAN Primary Graphics Adapter Internal Graphics Mode Share Memory [Disabled] [Auto] [Auto] [Enabled] [UMA] [Auto] [Disabled] [PCI] Select Screen Select Item + — Change Option F1 General Help F10 S[…]
-
Page 44: Asrock 960GM-GS3 FX
44 44 44 44 44 BIOS SETUP UTILITY ACPI Settings Select auto-detect or disable the STR feature. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Suspend T o RAM Check Ready Bit A way Mode Support Restore on AC / Power Loss Ring-In[…]
-
Page 45: Asrock 960GM-GS3 FX
45 45 45 45 45 BIOS SETUP UTILITY Storage Configuration v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Onboard SAT A Controller SA T A Operation Mode IDE1 Master IDE1 Slave SA T AII_1 SA T AII_2 SA T AII_3 SA T AII_4 [Enabled] [IDE] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Select Scr[…]
-
Page 46: Asrock 960GM-GS3 FX
46 46 46 46 46 TYPE Use this item to configure the type of the IDE device that you specify. Configuration options: [Not In stalled], [Auto], [CD/D V D], a nd [ARMD]. [Not Installed]: Select [Not Installed] to disable the use of IDE device. [Auto]: Select [Auto] to automatically detect the hard disk drive. After selecting the hard disk information i[…]
-
Page 47: Asrock 960GM-GS3 FX
47 47 47 47 47 BIOS SETUP UTILITY Advanced PCI / PnP Settings V alue in units of PCI clocks for PCI device latency timer regi ster . Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. PCI Latency Timer PCI IDE BusMaster [32] [Enabled] Advan[…]
-
Page 48: Asrock 960GM-GS3 FX
48 48 48 48 48 BIOS SETUP UTILITY Floppy Configuration Select the type of floppy drive connected to the system. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Advanced Floppy A [1.44 MB 3 «] 1 2 BIOS SETUP UTILITY Configure Super I[…]
-
Page 49: Asrock 960GM-GS3 FX
49 49 49 49 49 Parallel Port Mode Use this item to set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, “EPP Version”. Conf iguration options: [Normal], [Bi-Directional], and [ECP+EPP]. EPP V ersion Use this item to set the EPP versio[…]
-
Page 50: Asrock 960GM-GS3 FX
50 50 50 50 50 BIOS SETUP UTILITY USB Configuration T o enable or disable the onboard USB controllers. Select Screen Select Item +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Advanced USB Controller USB 2.0 Support Legacy USB Support USB Keyboard/Remote Power O[…]
-
Page 51: Asrock 960GM-GS3 FX
51 51 51 51 51 BIOS SETUP UTILITY Hardware Health Event Monitoring Select Screen Select Item F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. CPU T emperature M / B T emperature CPU Fan Speed Chassis Fan Speed Vcore + 3.30V + 5.00V + 12.00V Power Fan Speed : 3 7C/9 8F : 4722 RPM :[…]
-
Page 52: Asrock 960GM-GS3 FX
52 52 52 52 52 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Security Exit Boot Settings Configure Settings during System Boot. Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Boot Boot Settings Configuration 1st Boot De[…]
-
Page 53: Asrock 960GM-GS3 FX
53 53 53 53 53 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Exit Install or Change the password. Select Screen Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Security Change Supervisor Password Change User Password Security Settings Supe[…]
-
Page 54: Asrock 960GM-GS3 FX
54 54 54 54 54 BIOS SETUP UTILITY Main OC T weaker Advanced H/W Monitor Boot Security Exit system setup after saving the changes. F10 key can be used for this operation. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit F9 Load Defaults v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Exit Save Cha[…]
-
Page 55: Asrock 960GM-GS3 FX
55 55 55 55 55 4. 4. 4. 4. 4. Sof Sof Sof Sof Sof tware Suppor tware Suppor tware Suppor tware Suppor tware Suppor t t t t t 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System 4.1 Install Operating System This motherboard supports various Microsoft ® Windows ® operating systems: 7 /[…]
ASRock
960GM-GS3 FX Инструкция по применению
Популярность:
1508 просмотры
Подсчет страниц:
159 страницы
Тип файла:
Размер файла:
8.95 Mb
-
Драйверы
29
-
Инструкции по эксплуатации
2
Asrock 960GM-GS3 FX инструкция по эксплуатации
(17 страниц)
- Языки:Английский
-
Тип:
PDF -
Размер:
1.54 MB
Просмотр
Asrock 960GM-GS3 FX инструкция по эксплуатации
(159 страниц)
-
Тип:
PDF -
Размер:
7.11 MB
Просмотр
На NoDevice можно скачать инструкцию по эксплуатации для Asrock 960GM-GS3 FX. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации Asrock 960GM-GS3 FX. Инструкции по использованию помогут правильно настроить Asrock 960GM-GS3 FX, исправить ошибки и выявить неполадки.
960GM-GS3 FX /
960GM-S3 FX
User Manual
Version 1.0
Published September 2011 Copyright©2011 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the manual or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate”
ASRock Website: http://www.asrock.com
2
Contents
|
1 . Introduction ………………………………………………….. |
5 |
|
|
1.1 |
Package Contents …………………………………………………………… |
5 |
|
1.2 |
Specifications ………………………………………………………………… |
6 |
|
1.3 |
Motherboard Layout (960GM-GS3 FX / 960GM-S3 FX) …………. |
11 |
|
1.4 |
I/O Panel (960GM-GS3 FX) ……………………………………………….. |
12 |
|
1.5 |
I/O Panel (960GM-S3 FX) …………………………………………………. |
13 |
|
2. Installation …………………………………………………….. |
14 |
|
|
Pre-installation Precautions ……………………………………………………… |
14 |
|
|
2.1 |
CPU Installation ………………………………………………………………. |
15 |
|
2.2 |
Installation of CPU Fan and Heatsink ………………………………… |
15 |
|
2.3 |
Installation of Memory Modules (DIMM) ……………………………… |
16 |
|
2.4 |
Expansion Slots (PCI and PCI Express Slots) …………………….. |
17 |
|
2.5 |
Multi Monitor Feature ………………………………………………………. |
18 |
|
2.6 |
Jumpers Setup ……………………………………………………………….. |
20 |
|
2.7 |
Onboard Headers and Connectors …………………………………… |
21 |
|
2.8 |
SATAII Hard Disk Setup Guide ………………………………………….. |
25 |
2.9Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks
|
Installation ……………………………………………………………………… |
26 |
|
|
2.10 |
Hot Plug and Hot Swap Functions for SATA / SATAII HDDs …. |
26 |
|
2.11 |
SATA / SATAII HDD Hot Plug Feature and Operation Guide ….. |
27 |
|
2.12 |
Driver Installation Guide …………………………………………………… |
29 |
|
2.13 |
Installing Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit |
|
|
With RAID Functions ……………………………………………………….. |
29 |
|
|
2.13.1 Installing Windows® XP / XP 64-bit With RAID |
||
|
Functions ………………………………………………………….. |
29 |
|
|
2.13.2 Installing Windows® VistaTM / VistaTM 64-bit With RAID |
||
|
Functions ……………………………………………………………. |
30 |
|
|
2.14 |
Installing Windows® XP / XP 64-bit / VistaTM / VistaTM 64-bit |
|
|
Without RAID Functions …………………………………………………… |
31 |
|
|
2.14.1 Installing Windows® XP / XP 64-bit Without RAID |
||
|
Functions ……………………………………………………………. |
31 |
|
|
2.14.2 Installing Windows® VistaTM / VistaTM 64-bit Without RAID |
||
|
Functions ……………………………………………………………. |
32 |
|
|
2.15 |
Untied Overclocking Technology ………………………………………. |
33 |
3
|
3. BIOS SETUP UTILITY …………………………………………… |
34 |
||
|
3.1 |
Introduction ……………………………………………………………………. |
34 |
|
|
3.1.1 BIOS Menu Bar ……………………………………………………… |
34 |
||
|
3.1.2 |
Navigation Keys ……………………………………………………. |
35 |
|
|
3.2 |
Main Screen …………………………………………………………………… |
35 |
|
|
3.3 |
OC Tweaker Screen …………………………………………………………. |
36 |
|
|
3.4 |
Advanced Screen …………………………………………………………….. |
41 |
|
|
3.4.1 |
CPU Configuration ………………………………………………….. |
42 |
|
|
3.4.2 |
Chipset Configuration ……………………………………………… |
43 |
|
|
3.4.3 |
ACPI Configuration …………………………………………………. |
44 |
|
|
3.4.4 |
Storage Configuration ……………………………………………… |
45 |
|
|
3.4.5 |
PCIPnP Configuration ……………………………………………… |
47 |
|
|
3.4.6 |
Floppy Configuration ……………………………………………….. |
48 |
|
|
3.4.7 |
Super IO Configuration ……………………………………………. |
48 |
|
|
3.4.8 |
USB Configuration ………………………………………………….. |
50 |
|
|
3.5 |
Hardware Health Event Monitoring Screen …………………………… |
51 |
|
|
3.6 |
Boot Screen …………………………………………………………………… |
52 |
|
|
3.6.1 |
Boot Settings Configuration ……………………………………… |
52 |
|
|
3.7 |
Security Screen ………………………………………………………………. |
53 |
|
|
3.8 |
Exit Screen …………………………………………………………………….. |
54 |
|
|
4 . Software Support …………………………………………… |
55 |
||
|
4.1 |
Install Operating System ………………………………………………….. |
55 |
|
|
4.2 |
Support CD Information …………………………………………………….. |
55 |
|
|
4.2.1 |
Running Support CD ……………………………………………….. |
55 |
|
|
4.2.2 |
Drivers Menu …………………………………………………………. |
55 |
|
|
4.2.3 |
Utilities Menu ………………………………………………………… |
55 |
|
|
4.2.4 |
Contact Information …………………………………………………. |
55 |
4
1. Introduction
Thank you for purchasing ASRock 960GM-GS3 FX / 960GM-S3 FX motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by- step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.
Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com
If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. www.asrock.com/support/index.asp
1.1 Package Contents
ASRock 960GM-GS3 FX / 960GM-S3 FX Motherboard
(Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm) ASRock 960GM-GS3 FX / 960GM-S3 FX Quick Installation Guide ASRock 960GM-GS3 FX / 960GM-S3 FX Support CD
2 x Serial ATA (SATA) Data Cables (Optional)
1 x I/O Panel Shield
5
1.2 Specifications
|
Platform |
— Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm |
|
— Solid Capacitor for CPU power |
|
|
CPU |
— Support for Socket AM3+ processors |
|
— Support for Socket AM3 processors: AMD PhenomTM II X6 / |
|
|
X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / |
|
|
Sempron processors |
|
|
— Supports 8-Core CPU |
|
|
— Supports AMD OverDriveTM with ACC feature (Advanced |
|
|
Clock Calibration) |
|
|
— AMD LIVE!TM Ready |
|
|
— Supports AMD’s Cool ‘n’ QuietTM Technology |
|
|
— FSB 2600 MHz (5.2 GT/s) |
|
|
— Supports Untied Overclocking Technology (see CAUTION 1) |
|
|
— Supports Hyper-Transport 3.0 (HT 3.0) Technology |
|
|
Chipset |
— Northbridge: AMD 760G |
|
— Southbridge: AMD SB710 |
|
|
Memory |
— Dual Channel DDR3 Memory Technology (see CAUTION 2) |
|
— 2 x DDR3 DIMM slots |
|
|
— Support DDR3 1800(OC)/1600(OC)/1333/1066/800 non-ECC, |
|
|
un-buffered memory (see CAUTION 3) |
|
|
— Max. capacity of system memory: 8GB (see CAUTION 4) |
|
|
Expansion Slot |
— 1 x PCI Express 2.0 x16 slot (blue @ x16 mode) |
|
— 1 x PCI Express 2.0 x1 slot |
|
|
— 2 x PCI slots |
|
|
Graphics |
— Integrated AMD Radeon HD 3000 graphics |
|
— DX10 class iGPU, Pixel Shader 4.0 |
|
|
— Max. shared memory 512MB (see CAUTION 5) |
|
|
— Supports D-Sub with max. resolution up to 2048×1536 @ |
|
|
60Hz |
|
|
Audio |
— 5.1 CH HDAudio (Realtek ALC662 Audio Codec) |
|
— Supports THX TruStudioTM |
|
|
LAN |
— 960GM-GS3 FX |
|
Realtek PCIE x1 Gigabit LAN RTL8111E, |
|
|
speed 10/100/1000 Mb/s |
|
|
— 960GM-S3 FX |
|
|
Realtek PCIEx1 LAN 8105EL, speed 10/100 Mb/s |
|
|
— Supports Wake-On-LAN |
|
|
— Supports PXE |
|
6
|
Rear Panel I/O |
I/O Panel |
|
— 1 x PS/2 Mouse Port |
|
|
— 1 x PS/2 Keyboard Port |
|
|
— 1 x Serial Port: COM1 |
|
|
— 1 x VGA Port |
|
|
— 4 x Ready-to-Use USB 2.0 Ports |
|
|
— 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) |
|
|
— HD Audio Jack: Line in / Front Speaker / Microphone |
|
|
Connector |
— 4 x SATA2 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, |
|
RAID 10 and JBOD), NCQ, AHCI and “Hot Plug” functions |
|
|
(see CAUTION 6) |
|
|
— 1 x ATA133 IDE connector (supports 2 x IDE devices) |
|
|
— 1 x Floppy connector |
|
|
— 1 x Print port header |
|
|
— CPU/Chassis/Power FAN connector |
|
|
— 24 pin ATX power connector |
|
|
— 4 pin 12V power connector |
|
|
— Front panel audio connector |
|
|
— 2 x USB 2.0 headers (support 4 USB 2.0 ports) |
|
|
BIOS Feature |
— 8Mb AMI BIOS |
|
— AMI Legal BIOS |
|
|
— Supports “Plug and Play” |
|
|
— ACPI 1.1 Compliance Wake Up Events |
|
|
— Supports jumperfree |
|
|
— SMBIOS 2.3.1 Support |
|
|
— CPU, VCCM, NB Voltage Multi-adjustment |
|
|
Support CD |
— Drivers, Utilities, AntiVirus Software (Trial Version), |
|
AMD OverDriveTM Utility, CyberLink MediaEspresso 6.5 Trial, |
|
|
ASRock Software Suite (CyberLink DVD Suite — OEM and Trial; |
|
|
ASRock MAGIX Multimedia Suite — OEM) |
|
|
Unique Feature |
— ASRock OC Tuner (see CAUTION 7) |
|
— ASRock Intelligent Energy Saver (see CAUTION 8) |
|
|
— ASRock Instant Boot |
|
|
— ASRock Instant Flash (see CAUTION 9) |
|
|
— ASRock OC DNA (see CAUTION 10) |
|
|
— ASRock APP Charger (see CAUTION 11) |
|
|
— ASRock SmartView (see CAUTION 12) |
|
|
— ASRock XFast USB (see CAUTION 13) |
|
|
— ASRock XFast LAN (see CAUTION 14) |
|
|
— Hybrid Booster: |
|
|
— CPU Frequency Stepless Control (see CAUTION 15) |
|
|
— ASRock U-COP (see CAUTION 16) |
7
|
— Boot Failure Guard (B.F.G.) |
|
|
Hardware |
— CPU Temperature Sensing |
|
Monitor |
— Chassis Temperature Sensing |
|
— CPU/Chassis/Power Fan Tachometer |
|
|
— CPU Quiet Fan |
|
|
— Voltage Monitoring: +12V, +5V, +3.3V, Vcore |
|
|
OS |
— Microsoft® Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit |
|
/ XP / XP Media Center / XP 64-bit compliant |
|
|
Certifications |
— FCC, CE, WHQL |
|
— ErP/EuP Ready (ErP/EuP ready power supply is required) |
|
|
(see CAUTION 17) |
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the thirdparty overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
CAUTION!
1.This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 33 for details.
2.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 16 for proper installation.
3.Whether 1800/1600MHz memory speed is supported depends on the AM3/AM3+ CPU you adopt. If you want to adopt DDR3 1800/1600 memory module on this motherboard, please refer to the memory support list on our website for the compatible memory modules.
ASRock website http://www.asrock.com
4.Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 7 / VistaTM / XP. For Windows® OS with 64-bit CPU, there is no such limitation.
5.The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check AMD website for the latest information.
6.Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 25 to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.
8
7.It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices to get the best system performance under Windows® environment. Please visit our website for the operation procedures of ASRock OC Tuner. ASRock website: http://www.asrock.com
8.Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. The voltage regulator can reduce the number of output phases to improve efficiency when the CPU cores are idle. In other words, it is able to provide exceptional power saving and improve power efficiency without sacrificing computing performance. To use Intelligent Energy Saver function, please enable Cool ‘n’ Quiet option in the BIOS setup in advance. Please visit our website for the operation procedures of Intelligent Energy Saver.
ASRock website: http://www.asrock.com
9.ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems first like MS-DOS or Windows®. With this utility, you can press <F6> key during the POST or press <F2> key to BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility. Please be noted that the USB flash drive or hard drive must use FAT32/16/12 file system.
10.The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a convenient way for the user to record the OC settings and share with others. It helps you to save your overclocking record under the operating system and simplifies the complicated recording process of overclocking settings. With OC DNA, you can save your OC settings as a profile and share with your friends! Your friends then can load the OC profile to their own system to get the same OC settings as yours! Please be noticed that the OC profile can only be shared and worked on the same motherboard.
11.If you desire a faster, less restricted way of charging your Apple devices, such as iPhone/iPod/iPad Touch, ASRock has prepared a wonderful solution for you — ASRock APP Charger. Simply installing the APP Charger driver, it makes your iPhone charged much quickly from your computer and up to 40% faster than before. ASRock APP Charger allows you to quickly charge many Apple devices simultaneously and even supports continuous charging when your PC enters into Standby mode (S1), Suspend to RAM (S3), hibernation mode (S4) or power off (S5). With APP Charger driver installed, you can easily enjoy the marvelous charging experience than ever.
ASRock website: http://www.asrock.com/Feature/AppCharger/index.asp
9
12.SmartView, a new function of internet browser, is the smart start page for IE that combines your most visited web sites, your history, your Facebook friends and your real-time newsfeed into an enhanced view for a more personal Internet experience. ASRock motherboards are exclusively equipped with the SmartView utility that helps you keep in touch with friends on-the-go. To use SmartView feature, please make sure your OS version is Windows® 7 / 7 64 bit / VistaTM / VistaTM 64 bit, and your browser version is IE8.
ASRock website: http://www.asrock.com/Feature/SmartView/index.asp
13.ASRock XFast USB can boost USB storage device performance. The performance may depend on the property of the device.
14.ASRock XFast LAN provides a faster internet access, which includes below benefits. LAN Application Prioritization: You can configure your application priority ideally and/or add new programs. Lower Latency in Game: After setting online game priority higher, it can lower the latency in game. Traffic Shaping: You can watch Youtube HD video and download files simultaneously. Real-Time Analysis of Your Data: With the status window, you can easily recognize which data streams you are currently transferring.
15.Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU.
16.While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.
17.EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required. According to Intel’s suggestion, the EuP ready power supply must meet the standard of 5v standby power efficiency is higher than 50% under 100 mA current consumption. For EuP ready power supply selection, we recommend you checking with the power supply manufacturer for more details.
10
|
1.3 Motherboard Layout (960GM-GS3 FX / 960GM-S3 FX) |
|||||||||||||||||
|
1 |
2 |
3 |
4 |
5 |
6 |
||||||||||||
|
18.3cm (7.2-in) |
|||||||||||||||||
|
Keyboard PS2 |
Mouse |
1 |
AM3+ FSB2.6GHz |
||||||||||||||
|
PS2_USB_PW1 |
|||||||||||||||||
|
CPU_FAN1 |
|||||||||||||||||
|
ATX12V1 |
7 |
||||||||||||||||
|
COM1 |
PS2 |
module)pin |
ATXPWR1 |
||||||||||||||
|
FSB800 |
|||||||||||||||||
|
VGA1 |
SOCKETAM3 |
bit,240- |
module)bit,240pin- |
CMOS |
|||||||||||||
|
BATTERY |
|||||||||||||||||
|
USB 2.0 |
(64 |
(64 |
|||||||||||||||
|
T: USB2 |
SPEAKER1 |
8 |
|||||||||||||||
|
B: USB3 |
A1 |
B1 |
1 |
||||||||||||||
|
HT3.0 |
DX10 |
1 |
9 |
||||||||||||||
|
CLRCMOS1 |
|||||||||||||||||
|
USB 2.0 |
Top: |
||||||||||||||||
|
T: USB0 |
|||||||||||||||||
|
RJ-45 |
|||||||||||||||||
|
B: USB1 |
|||||||||||||||||
|
DDR31800 |
DDR3 |
DDR3 |
24.4cm (9.in)6- |
||||||||||||||
|
28 |
PWR FAN1 |
CoreCPU |
Phenom II |
Dual Channel |
|||||||||||||
|
MIC Bottom: IN |
FRONT |
Center: |
LINE Top: IN |
||||||||||||||
|
AMD |
|||||||||||||||||
|
760G |
|||||||||||||||||
|
LAN |
8- |
10 |
|||||||||||||||
|
Chipset |
|||||||||||||||||
|
Ready |
Support |
||||||||||||||||
|
27 |
PCIE1 |
IDE1 |
|||||||||||||||
|
26 |
RoHS |
||||||||||||||||
|
ErP/EuP |
11 |
||||||||||||||||
|
Taipei |
|||||||||||||||||
|
Super |
PCIE2 |
||||||||||||||||
|
I/O |
12 |
||||||||||||||||
|
13 |
|||||||||||||||||
|
25 |
8Mb |
in |
AMD |
||||||||||||||
|
BIOS |
PCI1 |
SATAII_3 SATAII_4 |
|||||||||||||||
|
Design |
SB710 |
(PORT 2) |
(PORT 3) |
||||||||||||||
|
24 |
Chipset |
14 |
|||||||||||||||
|
AUDIO |
|||||||||||||||||
|
CODEC |
HD_AUDIO1 |
PCI2 |
|||||||||||||||
|
23 |
1 |
PANEL 1 |
HDLED RESET |
||||||||||||||
|
PLED PWRBTN |
15 |
||||||||||||||||
|
CHA_FAN1 |
USB6_7 |
USB4_5 |
SATAII_1 (PORT 0) |
SATAII_2 (PORT 1) |
|||||||||||||
|
1 |
1 |
1 |
|||||||||||||||
|
1 |
|||||||||||||||||
|
LPT1 |
FLOPPY1 |
||||||||||||||||
|
22 |
21 |
20 |
19 |
18 |
17 |
16 |
|
1 |
PS2_USB_PW1 Jumper |
15 |
System Panel Header (PANEL1, White) |
|
2 |
ATX 12V Power Connector (ATX12V1) |
16 |
Secondary SATAII Connector |
|
3 |
CPU Heatsink Retention Module |
(SATAII_2 (PORT 1)) |
|
|
4 |
AM3 CPU Socket |
17 |
Primary SATAII Connector |
|
5 |
2 x 240-pin DDR3 DIMM Slots |
(SATAII_1 (PORT 0)) |
|
|
(Dual Channel: DDR3_A1, DDR3_B1; Blue) |
18 |
USB 2.0 Header (USB4_5, Blue) |
|
|
6 |
CPU Fan Connector (CPU_FAN1) |
19 |
USB 2.0 Header (USB6_7, Blue) |
|
7 |
ATX Power Connector (ATXPWR1) |
20 |
Chassis Fan Connector (CHA_FAN1) |
|
8 |
Chassis Speaker Header |
21 |
Floppy Connector (FLOPPY1) |
|
(SPEAKER 1, White) |
22 |
Print Port Header (LPT1, White) |
|
|
9 |
Clear CMOS Jumper (CLRCMOS1) |
23 |
Front Panel Audio Header |
|
10 |
Primary IDE Connector (IDE1, Blue) |
(HD_AUDIO1, White) |
|
|
11 |
Northbridge Controller |
24 |
PCI Slots (PCI1- 2) |
|
12 |
Southbridge Controller |
25 |
SPI Flash Memory (8Mb) |
|
13 |
Third SATAII Connector (SATAII_3 (PORT 2)) |
26 |
PCI Express 2.0 x16 Slot (PCIE2; Blue) |
|
14 |
Fourth SATAII Connector (SATAII_4 (PORT 3)) |
27 |
PCI Express 2.0 x1 Slot (PCIE1; Blue) |
|
28 |
Power Fan Connector (PWR_FAN1) |
11
1.4 I/O Panel (960GM-GS3 FX)
4
5
6
|
10 |
9 |
8 |
7 |
||
|
1 |
PS/2 Mouse Port (Green) |
6 |
Microphone (Pink) |
||
|
2 |
USB 2.0 Ports (USB23) |
7 |
USB 2.0 Ports (USB01) |
||
|
* 3 |
RJ-45 Port |
8 |
VGA Port |
||
|
4 |
Line In (Light Blue) |
9 |
COM Port |
||
|
5 |
Line Out (Lime) |
10 |
PS/2 Keyboard Port (Purple) |
*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.
LAN Port LED Indications
|
Activity/Link LED |
SPEED LED |
ACT/LINK SPEED |
|||||||
|
LED |
LED |
||||||||
|
Status |
Description |
Status |
Description |
||||||
|
Off |
No Activity |
Off |
10Mbps connection |
||||||
|
Blinking |
Data Activity |
Orange |
100Mbps connection |
||||||
|
Green |
1Gbps connection |
LAN Port |
|||||||
*To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming.
For Windows® XP:
After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer ToolBox” 
, click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or
“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system.
For Windows® 7 / VistaTM:
After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.
12
1.5 I/O Panel (960GM-S3 FX)
4
5
6
|
10 |
9 |
8 |
7 |
||
|
1 |
PS/2 Mouse Port (Green) |
6 |
Microphone (Pink) |
||
|
2 |
USB 2.0 Ports (USB23) |
7 |
USB 2.0 Ports (USB01) |
||
|
* 3 |
RJ-45 Port |
8 |
VGA Port |
||
|
4 |
Line In (Light Blue) |
9 |
COM Port |
||
|
5 |
Line Out (Lime) |
10 |
PS/2 Keyboard Port (Purple) |
*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.
LAN Port LED Indications
|
Activity/Link LED |
SPEED LED |
ACT/LINK SPEED |
|||||||
|
LED |
LED |
||||||||
|
Status |
Description |
Status |
Description |
||||||
|
Off |
No Activity |
Off |
10Mbps connection |
||||||
|
Blinking |
Data Activity |
Orange |
100Mbps connection |
LAN Port
*To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming.
For Windows® XP:
After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer ToolBox” 
, click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or
“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system.
For Windows® 7 / VistaTM:
After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.
13
2. Installation
This is a Micro ATX form factor (9.6-in x 7.2-in, 24.4 cm x 18.3 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.
1.Unplug the power cord from the wall socket before touching any component.
2.To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.
3.Hold components by the edges and do not touch the ICs.
4.Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.
5.When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.
14
2.1CPU Installation
Step 1. Unlock the socket by lifting the lever up to a 90o angle.
Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle.
Step 3. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins.
Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
|
Lever 90° Up |
||
|
CPU Golden Triangle |
||
|
Socker Corner Small Triangle |
||
|
STEP 1: |
STEP 2 / STEP 3: |
STEP 4: |
|
Lift Up The Socket Lever |
Match The CPU Golden Triangle |
Push Down And Lock |
|
To The Socket Corner Small |
The Socket Lever |
|
|
Triangle |
2.2 Installation of CPU Fan and Heatsink
After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see Page 11, No. 6). For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink.
15
2.3 Installation of Memory Modules (DIMM)
960GM-GS3 FX / 960GM-S3 FX motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install two identical (the same brand, speed, size and chip-type) memory modules in the DDR3 DIMM slots to activate Dual Channel Memory Technology. Otherwise, it will operate at single channel mode.
1.It is not allowed to install a DDR or DDR2 memory module into DDR3 slot;otherwise, this motherboard and DIMM may be damaged.
2.If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology.
Installing a DIMM
Please make sure to disconnect power supply before adding or removing DIMMs or the system components.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.
notch break
notch
break
The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated.
16
2.4 Expansion Slots (PCI and PCI Express Slots)
There are 2 PCI slots and 2 PCI Express slots on this motherboard.
PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface.
PCIE slots:
PCIE1 (PCIE x1 slot; Blue) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.
PCIE2 (PCIE x16 slot; Blue) is used for PCI Express cards with x16 lane width graphics cards.
Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.
Step 3. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
Step 4. Fasten the card to the chassis with screws.
17
Loading…